Re: [PATCH 0/2] SSD1307fb updates

[Tomi Valkeinen]

On 08/09/15 22:19, Olliver Schinagl wrote:
> Having a few ssd1309 128x64 OLED displays laying around, I added support for it to the existing 1307fb driver. While doing this I noticed the headers where out of order so I fixed those as well.
> 
> For this specific display, the following can be used in a i2c node for example.
> 
> 	ssd1309: oled@3c {
> 		compatible = "solomon,ssd1309fb-i2c";
> 		pinctrl-names = "default";
> 		pinctrl-0 = <&oled_pins>;
> 		reg = <0x3c>;
> 		reset-gpios = <&pio 8 13 GPIO_ACTIVE_HIGH>;
> 		solomon,width = <128>;
> 		solomon,height = <64>;
> 		solomon,com-invdir;
> 		solomon,page-offset = <0>;
> 		solomon,prechargep1 = <2>;
> 		solomon,prechargep2 = <8>;
> 	};
> 
> Olliver Schinagl (2):
>   fbdev: ssd1307fb: alphabetize headers
>   fbdev: ssd1307fb: add ssd1309 support
> 
>  .../devicetree/bindings/video/ssd1307fb.txt         |  3 ++-
>  drivers/video/fbdev/ssd1307fb.c                     | 21 ++++++++++++++++-----
>  2 files changed, 18 insertions(+), 6 deletions(-)
> 

Thanks, queued for 4.4.

 Tomi

Attachment: signature.asc
Description: OpenPGP digital signature