Re: [Patch v2 06/10] regulators: qcom-smd: Add PM8916 support

[Andy Gross]

On Wed, Sep 23, 2015 at 10:23:58AM -0700, Bjorn Andersson wrote:
> On Wed 23 Sep 09:53 PDT 2015, Andy Gross wrote:
> 
> > This patch adds support and documentation for the PM8916 regulators
> > found on MSM8916 platforms.
> > 
> > Signed-off-by: Andy Gross <agross@xxxxxxxxxxxxxx>
> > ---
> >  .../bindings/soc/qcom/qcom,smd-rpm-regulator.txt   |   18 ++++++
> >  drivers/regulator/qcom_smd-regulator.c             |   64 ++++++++++++++++++++
> >  2 files changed, 82 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
> > index 7084474..05dfc1a 100644
> > --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
> > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm-regulator.txt
> > @@ -18,6 +18,7 @@ Regulator nodes are identified by their compatible:
> >  	Definition: must be one of:
> >  		    "qcom,rpm-pm8841-regulators"
> >  		    "qcom,rpm-pm8941-regulators"
> > +		    "qcom,rpm-pm8916-regulators"
> 
> Alphabetical please
> 
> >  
> >  - vdd_s1-supply:
> >  - vdd_s2-supply:
> > @@ -50,6 +51,19 @@ Regulator nodes are identified by their compatible:
> >  	Definition: reference to regulator supplying the input pin, as
> >  		    described in the data sheet
> >  
> > +- vdd_s1-supply:
> > +- vdd_s2-supply:
> > +- vdd_s3-supply:
> > +- vdd_s4-supply:
> > +- vdd_l1_l2_l3-supply
> > +- vdd_l4_l5_l6-supply
> > +- vdd_l7-supply
> 
> End these with ':' as well
> 
> > +- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18-supply:
> > +	Usage: optional (pm8916 only)
> > +	Value type: <phandle>
> > +	Definition: reference to regulator supplying the input pin, as
> > +		    described in the data sheet
> > +
> [..]
> > diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
> [..]
> >  static const struct of_device_id rpm_of_match[] = {
> > +	{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
> 
> pm8916 > pm8841
> 
> >  	{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
> >  	{ .compatible = "qcom,rpm-pm8941-regulators", .data = &rpm_pm8941_regulators },
> >  	{}
> 
> With these nits:
> 
> Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
> 
> Regards,
> Bjorn

I'll fixup this when I apply it.  Thanks!

-- 
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/