Re: [PATCH v2 00/11] clocksource: sh_cmt: DT binding rework V2

From: Rob Herring
Date: Mon Sep 21 2015 - 14:55:23 EST


On 09/17/2015 04:53 AM, Magnus Damm wrote:
> clocksource: sh_cmt: DT binding rework V2
>
> [PATCH v2 01/11] devicetree: bindings: Remove sh7372 CMT binding
> [PATCH v2 02/11] clocksource: sh_cmt: Use 0x3f mask for SH_CMT_48BIT case
> [PATCH v2 03/11] devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings
> [PATCH v2 04/11] clocksource: sh_cmt: Support separate R-Car Gen2 CMT0/1
> [PATCH v2 05/11] devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings
> [PATCH v2 06/11] ARM: shmobile: Update CMT compat string users in DTS
> [PATCH v2 07/11] devicetree: bindings: Deprecate property, update example
> [PATCH v2 08/11] ARM: shmobile: Remove CMT renesas,channels-mask from DTS
> [PATCH v2 09/11] devicetree: bindings: Remove unused 32-bit CMT bindings
> [PATCH v2 10/11] clocksource: sh_cmt: Remove unused 32-bit CMT bindings
> [PATCH v2 11/11] devicetree: bindings: Remove deprecated properties
>
> This series reworks the CMT DT bindings to try to deal with the following:
> - R-Car Gen2 CMT0 and CMT1 hardware instances are not identical
> - The property renesas,channels-mask is not enough to describe the difference
> - DT should describe the hardware, not the software implementation
> - Not all documented DT bindings are actually used
>
> Without these patches the binding "renesas,cmt-48-gen2" is used for both
> CMT0 and CMT1 on R-Car Gen2 SoCs. CMT0 and CMT1 are currently seen by the
> Linux device driver as compatible hardware, and the device-specific property
> "renesas,channels-mask" is used to point out some of the hardware configuration
> differences. Since the driver is not feature complete only some differences are
> described and when diving into the data sheet we can see that:
>
> 1) CMT0 is not 48-bit at all, instead it only supports 32-bit counters.
> 2) Some channels of CMT1 are 48-bit, some 32-bit.
> 3) A couple of CMT1 channels have even more features.
>
> It turns out that none of the above differences are described in our current
> DT files. And since we use the same compat string for CMT0 and CMT1 the driver
> itself cannot enable features specific only to CMT1 without first updating
> the DTS. So this series is ground work for future feature patches.
>
> It seems that we have two choices if we want to support CMT1 features:
> A) Keep existing DT bindings, add more properties for CMT1
> B) Rework the compatible strings and keep configuration in the driver
>
> Judging by above it seems that DT update is inevitable. In my mind it is
> rather painful to update the DT so I'd like to minimize the number of
> updates and let the majority of the changes only happen in the driver.
> And since we should really describe hardware in DT but driver features tend
> to be implemented incrementally then B) seems like a good fit to me.

Agreed.

For 1, 3. 5, 7, 9, 11:

Acked-by: Rob Herring <robh@xxxxxxxxxx>

>
> I wouldn't mind going with A) but to be honest I must say that the existing
> compat string "renesas,cmt-48-gen2" is just too confusing with "48"
> (when CMT0 is 32bit-only) and also "gen2" (used without product line R-Car).
>
> Because of that I've gone with B) and reworked the bindings to separate
> CMT0 from CMT1 and keep channel configuration in the device driver.
>
> While at it I've deprecated "renesas,channels-mask" and the old DT compat
> strings. Per-SoC compat strings have also been reworked, but are not left
> around documented as deprecated since they were never used by the driver.
>
> Comments are very welcome! If all are in favor then it would be good to
> merge patch 1-5 first and patch 6-8 later once 1-5 are in. Old DTBs are
> left working but treated as low-feature CMT0. New DTBs including patch 6
> will not work on old kernels.
>
> V2 patch series fixes patch 1-2 and adds patches 9, 10, 11.
> Patch 9 and 10 cleans up r8a7740 and sh73a0 bindings.
> Patch 11 removes deprecated properties as proposed by Laurent.
>
> Many thanks to Geert and Laurent for feedback!
>
> Signed-off-by: Magnus Damm <damm+renesas@xxxxxxxxxxxxx>
> Acked-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> (For patch 1-8)
> Tested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> (For patch 1-8)
> Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> (For patch 1-7)
> ---
>
> Written against renesas-drivers-2015-09-15-v4.3-rc1
>
> Documentation/devicetree/bindings/timer/renesas,cmt.txt | 85 ++++++---------
> arch/arm/boot/dts/r8a73a4.dtsi | 5
> arch/arm/boot/dts/r8a7740.dtsi | 3
> arch/arm/boot/dts/r8a7790.dtsi | 10 -
> arch/arm/boot/dts/r8a7791.dtsi | 10 -
> arch/arm/boot/dts/r8a7793.dtsi | 10 -
> arch/arm/boot/dts/r8a7794.dtsi | 10 -
> arch/arm/boot/dts/sh73a0.dtsi | 3
> drivers/clocksource/sh_cmt.c | 54 ++++++---
> 9 files changed, 85 insertions(+), 105 deletions(-)
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/