Re: [PATCH 01/10] phy: exynos-ufs: add UFS PHY driver for EXYNOS SoC

From: Kishon Vijay Abraham I
Date: Fri Sep 18 2015 - 01:36:10 EST


Hi,

On Friday 21 August 2015 02:57 PM, Alim Akhtar wrote:
> From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
>
> This patch introduces Exynos UFS PHY driver. This driver
> supports to deal with phy calibration and power control
> according to UFS host driver's behavior.
>
> Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
> Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
> Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
> .../devicetree/bindings/phy/samsung-phy.txt | 22 ++
> drivers/phy/Kconfig | 7 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-exynos-ufs.c | 277 ++++++++++++++++++++
> drivers/phy/phy-exynos-ufs.h | 73 ++++++
> drivers/phy/phy-exynos7-ufs.h | 89 +++++++
> include/linux/phy/phy-exynos-ufs.h | 107 ++++++++
> 7 files changed, 576 insertions(+)
> create mode 100644 drivers/phy/phy-exynos-ufs.c
> create mode 100644 drivers/phy/phy-exynos-ufs.h
> create mode 100644 drivers/phy/phy-exynos7-ufs.h
> create mode 100644 include/linux/phy/phy-exynos-ufs.h
>
> diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
> index 60c6f2a..1abe2c4 100644
> --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
> @@ -174,3 +174,25 @@ Example:
> usbdrdphy0 = &usb3_phy0;
> usbdrdphy1 = &usb3_phy1;
> };
> +
> +Samsung Exynos7 soc serise UFS PHY Controller

%s/serise/series
> +---------------------------------------------
> +
> +UFS PHY nodes are defined to describe on-chip UFS Physical layer controllers.
> +Each UFS PHY controller should have its own node.
> +
> +Required properties:
> +- compatible : compatible list, contains "samsung,exynos7-ufs-phy"

compatible list?
> +- reg : offset and length of the UFS PHY register set;

The sentences need not end with semi-colon.
> +- reg-names : reg name(s) must be 'phy-pma';
> +- #phy-cells : must be zero
> +- samsung,syscon-phandle : a phandle to the PMU system controller, no arguments
> +
> +Example:
> + ufs_phy: ufs-phy@0x15571800 {
> + compatible = "samsung,exynos7-ufs-phy";
> + reg = <0x15571800 0x240>;
> + reg-names = "phy-pma";
> + samsung,syscon-phandle = <&pmu_system_controller>;
> + #phy-cells = <0>;
> + };
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 6b8dd16..7449376 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -358,4 +358,11 @@ config PHY_BRCMSTB_SATA
> Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
> Likely useful only with CONFIG_SATA_BRCMSTB enabled.
>
> +config PHY_EXYNOS_UFS
> + tristate "EXYNOS SoC series UFS PHY driver"
> + depends on OF && ARCH_EXYNOS
> + select GENERIC_PHY
> + help
> + Support for UFS PHY on Samsung EXYNOS chipsets.
> +
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index f344e1b..7a36818 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -45,3 +45,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
> obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
> obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
> obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
> +obj-$(CONFIG_PHY_EXYNOS_UFS) += phy-exynos-ufs.o
> diff --git a/drivers/phy/phy-exynos-ufs.c b/drivers/phy/phy-exynos-ufs.c
> new file mode 100644
> index 0000000..840375d
> --- /dev/null
> +++ b/drivers/phy/phy-exynos-ufs.c
> @@ -0,0 +1,277 @@
> +/*
> + * UFS PHY driver for Samsung EXYNOS SoC
> + *
> + * Copyright (C) 2015 Samsung Electronics Co., Ltd.
> + * Author: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/io.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/phy/phy.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +#include <linux/iopoll.h>
> +#include <linux/phy/phy-exynos-ufs.h>
> +
> +#include "phy-exynos-ufs.h"
> +
> +#define for_each_phy_lane(phy, i) \
> + for (i = 0; i < (phy)->lane_cnt; i++)
> +#define for_each_phy_cfg(cfg) \
> + for (; (cfg)->id; (cfg)++)
> +
> +#define phy_pma_writel(phy, val, reg) \
> + writel((val), (phy)->reg_pma + (reg))
> +#define phy_pma_readl(phy, reg) \
> + readl((phy)->reg_pma + (reg))

would prefer having functions for readl and writel.
> +
> +#define PHY_DEF_LANE_CNT 1
> +
> +static inline struct exynos_ufs_phy *get_exynos_ufs_phy(struct phy *phy)
> +{
> + return (struct exynos_ufs_phy *)phy_get_drvdata(phy);
> +}
> +
> +static void exynos_ufs_phy_config(struct exynos_ufs_phy *phy,
> + const struct exynos_ufs_phy_cfg *cfg, u8 lane)
> +{
> + enum {LANE_0, LANE_1}; /* lane index */
> +
> + switch (lane) {
> + case LANE_0:
> + phy_pma_writel(phy, cfg->val, cfg->off_0);
> + break;
> + case LANE_1:
> + if (cfg->id == PHY_TRSV_BLK)
> + phy_pma_writel(phy, cfg->val, cfg->off_1);
> + break;
> + }
> +}
> +
> +static bool match_cfg_to_pwr_mode(u8 desc, u8 required_pwr)
> +{
> + if (IS_PWR_MODE_ANY(desc))
> + return true;
> +
> + if (IS_PWR_MODE_HS(required_pwr) && IS_PWR_MODE_HS_ANY(desc))
> + return true;
> +
> + if (COMP_PWR_MODE(required_pwr, desc))
> + return true;
> +
> + if (COMP_PWR_MODE_MD(required_pwr, desc) &&
> + COMP_PWR_MODE_GEAR(required_pwr, desc) &&
> + COMP_PWR_MODE_SER(required_pwr, desc))
> + return true;
> +
> + return false;
> +}
> +
> +int exynos_ufs_phy_calibrate(struct phy *phy, enum phy_cfg_tag tag, u8 pwr)
> +{
> + struct exynos_ufs_phy *ufs_phy = get_exynos_ufs_phy(phy);
> + struct exynos_ufs_phy_cfg **cfgs = ufs_phy->cfg;
> + const struct exynos_ufs_phy_cfg *cfg;
> + int i;
> +
> + if (unlikely(tag < CFG_PRE_INIT || tag >= CFG_TAG_MAX)) {
> + dev_err(ufs_phy->dev, "invalid phy config index %d\n", tag);
> + return -EINVAL;
> + }
> +
> + cfg = cfgs[tag];
> + if (!cfg)
> + goto out;
> +
> + for_each_phy_cfg(cfg) {
> + for_each_phy_lane(ufs_phy, i) {
> + if (match_cfg_to_pwr_mode(cfg->desc, pwr))
> + exynos_ufs_phy_config(ufs_phy, cfg, i);
> + }
> + }
> +
> +out:
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(exynos_ufs_phy_calibrate);

Er.. why are you exporting this function? The only interface I'd like
the controller drivers to use is PHY ops. No export symbols please.
> +
> +void exynos_ufs_phy_set_lane_cnt(struct phy *phy, u8 lane_cnt)
> +{
> + struct exynos_ufs_phy *ufs_phy = get_exynos_ufs_phy(phy);
> +
> + ufs_phy->lane_cnt = lane_cnt;
> +}
> +EXPORT_SYMBOL_GPL(exynos_ufs_phy_set_lane_cnt);

same here.
> +
> +int exynos_ufs_phy_wait_for_lock_acq(struct phy *phy)
> +{
> + struct exynos_ufs_phy *ufs_phy = get_exynos_ufs_phy(phy);
> + const unsigned int timeout_us = 100000;
> + const unsigned int sleep_us = 10;
> + u32 val;
> + int err;
> +
> + err = readl_poll_timeout(
> + ufs_phy->reg_pma + PHY_APB_ADDR(PHY_PLL_LOCK_STATUS),
> + val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us);
> + if (err) {
> + dev_err(ufs_phy->dev,
> + "failed to get phy pll lock acquisition %d\n", err);
> + goto out;
> + }
> +
> + err = readl_poll_timeout(
> + ufs_phy->reg_pma + PHY_APB_ADDR(PHY_CDR_LOCK_STATUS),
> + val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us);
> + if (err) {
> + dev_err(ufs_phy->dev,
> + "failed to get phy cdr lock acquisition %d\n", err);
> + goto out;
> + }
> +
> +out:
> + return err;
> +}
> +EXPORT_SYMBOL_GPL(exynos_ufs_phy_wait_for_lock_acq);
> +
> +static int exynos_ufs_phy_init(struct phy *phy)
> +{
> + return 0;
> +}
> +
> +static int exynos_ufs_phy_exit(struct phy *phy)
> +{
> + return 0;
> +}

Empty functions are not required.
> +
> +static inline void exynos_ufs_phy_ctrl_isol(
> + struct exynos_ufs_phy *phy, u32 isol)
> +{
> + regmap_update_bits(phy->reg_pmu, phy->isol->offset,
> + phy->isol->mask, isol ? 0 : phy->isol->en);
> +}
> +
> +static int exynos_ufs_phy_power_on(struct phy *phy)
> +{
> + struct exynos_ufs_phy *_phy = get_exynos_ufs_phy(phy);
> +
> + exynos_ufs_phy_ctrl_isol(_phy, false);
> + return 0;
> +}
> +
> +static int exynos_ufs_phy_power_off(struct phy *phy)
> +{
> + struct exynos_ufs_phy *_phy = get_exynos_ufs_phy(phy);
> +
> + exynos_ufs_phy_ctrl_isol(_phy, true);
> + return 0;
> +}
> +
> +static struct phy_ops exynos_ufs_phy_ops = {
> + .init = exynos_ufs_phy_init,
> + .exit = exynos_ufs_phy_exit,
> + .power_on = exynos_ufs_phy_power_on,
> + .power_off = exynos_ufs_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct of_device_id exynos_ufs_phy_match[];
> +
> +static int exynos_ufs_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> + const struct of_device_id *match;
> + struct exynos_ufs_phy *phy;
> + struct phy *gen_phy;
> + struct phy_provider *phy_provider;
> + const struct exynos_ufs_phy_drvdata *drvdata;
> + int err = 0;
> +
> + match = of_match_node(exynos_ufs_phy_match, dev->of_node);
> + if (!match) {
> + err = -EINVAL;
> + dev_err(dev, "failed to get match_node\n");
> + goto out;
> + }
> +
> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy) {
> + err = -ENOMEM;
> + dev_err(dev, "failed to allocate ufs-phy\n");

dev_err is not required. Kzalloc will print error message itself on failure.
> + goto out;
> + }
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy-pma");
> + phy->reg_pma = devm_ioremap_resource(dev, res);
> + if (IS_ERR(phy->reg_pma)) {
> + err = PTR_ERR(phy->reg_pma);
> + dev_err(dev, "failed ioremap for ufs-phy pma resource\n");

same here.
> + goto out;
> + }
> +
> + phy->reg_pmu = syscon_regmap_lookup_by_phandle(
> + dev->of_node, "samsung,syscon-phandle");
> + if (IS_ERR(phy->reg_pmu)) {
> + err = PTR_ERR(phy->reg_pmu);
> + dev_err(dev, "failed syscon remap for pmu\n");
> + goto out;
> + }
> +
> + gen_phy = devm_phy_create(dev, NULL, &exynos_ufs_phy_ops);
> + if (IS_ERR(gen_phy)) {
> + err = PTR_ERR(gen_phy);
> + dev_err(dev, "failed to create PHY for ufs-phy\n");
> + goto out;
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (IS_ERR(phy_provider)) {
> + err = PTR_ERR(phy_provider);
> + dev_err(dev, "failed to register phy-provider\n");
> + goto out;
> + }
> +
> + drvdata = match->data;
> + phy->dev = dev;
> + phy->drvdata = drvdata;
> + phy->cfg = (struct exynos_ufs_phy_cfg **)drvdata->cfg;
> + phy->isol = &drvdata->isol;
> + phy->lane_cnt = PHY_DEF_LANE_CNT;
> +
> + phy_set_drvdata(gen_phy, phy);

phy_ser_drvdata should be invoked phy_provider_register or else there is
a possibility of getting an abort.
> +
> +out:
> + return err;
> +}
> +
> +static const struct of_device_id exynos_ufs_phy_match[] = {
> + {
> + .compatible = "samsung,exynos7-ufs-phy",
> + .data = &exynos7_ufs_phy,
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, exynos_ufs_phy_match);
> +
> +static struct platform_driver exynos_ufs_phy_driver = {
> + .probe = exynos_ufs_phy_probe,
> + .driver = {
> + .name = "exynos-ufs-phy",
> + .owner = THIS_MODULE,
> + .of_match_table = exynos_ufs_phy_match,
> + },
> +};
> +module_platform_driver(exynos_ufs_phy_driver);
> +MODULE_DESCRIPTION("EXYNOS SoC UFS PHY Driver");
> +MODULE_AUTHOR("Seungwon Jeon <tgih.jun@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/phy/phy-exynos-ufs.h b/drivers/phy/phy-exynos-ufs.h
> new file mode 100644
> index 0000000..9a9e991
> --- /dev/null
> +++ b/drivers/phy/phy-exynos-ufs.h
> @@ -0,0 +1,73 @@
> +/*
> + * UFS PHY driver for Samsung EXYNOS SoC
> + *
> + * Copyright (C) 2015 Samsung Electronics Co., Ltd.
> + * Author: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#ifndef _PHY_EXYNOS_UFS_
> +#define _PHY_EXYNOS_UFS_
> +
> +#define PHY_COMN_BLK 1
> +#define PHY_TRSV_BLK 2
> +#define END_UFS_PHY_CFG { 0 }
> +#define PHY_TRSV_CH_OFFSET 0x30
> +#define PHY_APB_ADDR(off) ((off) << 2)
> +
> +#define PHY_COMN_REG_CFG(o, v, d) { \
> + .off_0 = PHY_APB_ADDR((o)), \
> + .off_1 = 0, \
> + .val = (v), \
> + .desc = (d), \
> + .id = PHY_COMN_BLK, \
> +}
> +
> +#define PHY_TRSV_REG_CFG(o, v, d) { \
> + .off_0 = PHY_APB_ADDR((o)), \
> + .off_1 = PHY_APB_ADDR((o) + PHY_TRSV_CH_OFFSET), \
> + .val = (v), \
> + .desc = (d), \
> + .id = PHY_TRSV_BLK, \
> +}
> +
> +/* UFS PHY registers */
> +#define PHY_PLL_LOCK_STATUS 0x1e
> +#define PHY_CDR_LOCK_STATUS 0x5e
> +
> +#define PHY_PLL_LOCK_BIT BIT(5)
> +#define PHY_CDR_LOCK_BIT BIT(4)
> +
> +struct exynos_ufs_phy_cfg {
> + u32 off_0;
> + u32 off_1;
> + u32 val;
> + u8 desc;
> + u8 id;
> +};
> +
> +struct exynos_ufs_phy_drvdata {
> + const struct exynos_ufs_phy_cfg **cfg;
> + struct pmu_isol {
> + u32 offset;
> + u32 mask;
> + u32 en;
> + } isol;
> +};
> +
> +struct exynos_ufs_phy {
> + struct device *dev;
> + void __iomem *reg_pma;
> + void __iomem *reg_pmu;
> + const struct exynos_ufs_phy_drvdata *drvdata;
> + struct exynos_ufs_phy_cfg **cfg;
> + const struct pmu_isol *isol;
> + u8 lane_cnt;
> +};
> +
> +#include "phy-exynos7-ufs.h"
> +
> +#endif /* _PHY_EXYNOS_UFS_ */
> diff --git a/drivers/phy/phy-exynos7-ufs.h b/drivers/phy/phy-exynos7-ufs.h
> new file mode 100644
> index 0000000..6cd29d7
> --- /dev/null
> +++ b/drivers/phy/phy-exynos7-ufs.h
> @@ -0,0 +1,89 @@
> +/*
> + * UFS PHY driver for Samsung EXYNOS SoC
> + *
> + * Copyright (C) 2015 Samsung Electronics Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#ifndef _PHY_EXYNOS7_UFS_H_
> +#define _PHY_EXYNOS7_UFS_H_
> +
> +#include "phy-exynos-ufs.h"
> +
> +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL 0x720
> +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1
> +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0)
> +
> +/* Calibration for phy initialization */
> +static const struct exynos_ufs_phy_cfg exynos7_pre_init_cfg[] = {
> + PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY),
> + PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY),
> + PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY),
> + PHY_COMN_REG_CFG(0x017, 0x84, PWR_MODE_ANY),
> + PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY),
> + PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY),
> + PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY),
> + PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY),
> + PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY),
> + PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY),
> + PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY),
> + PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY),
> + PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY),
> + PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY),
> + END_UFS_PHY_CFG
> +};
> +
> +static const struct exynos_ufs_phy_cfg exynos7_post_init_cfg[] = {
> + END_UFS_PHY_CFG
> +};
> +
> +/* Calibration for HS mode series A/B */
> +static const struct exynos_ufs_phy_cfg exynos7_pre_pwr_hs_cfg[] = {
> + PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_HS_ANY),
> + PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_HS_ANY),
> + PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_HS_ANY),
> + /* Setting order: 1st(0x16, 2nd(0x15) */
> + PHY_COMN_REG_CFG(0x016, 0xff, PWR_MODE_HS_ANY),
> + PHY_COMN_REG_CFG(0x015, 0x80, PWR_MODE_HS_ANY),
> + PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_HS_ANY),
> + PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_HS_ANY),
> + PHY_TRSV_REG_CFG(0x037, 0x43, PWR_MODE_HS_ANY),
> + PHY_TRSV_REG_CFG(0x038, 0x3f, PWR_MODE_HS_ANY),
> + PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_HS_G2_SER_A),
> + PHY_TRSV_REG_CFG(0x042, 0xbb, PWR_MODE_HS_G2_SER_B),
> + PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_HS_ANY),
> + PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_HS_ANY),
> + PHY_TRSV_REG_CFG(0x034, 0x35, PWR_MODE_HS_G2_SER_A),
> + PHY_TRSV_REG_CFG(0x034, 0x36, PWR_MODE_HS_G2_SER_B),
> + PHY_TRSV_REG_CFG(0x035, 0x5b, PWR_MODE_HS_G2_SER_A),
> + PHY_TRSV_REG_CFG(0x035, 0x5c, PWR_MODE_HS_G2_SER_B),
> + END_UFS_PHY_CFG
> +};
> +
> +/* Calibration for HS mode series A/B atfer PMC */
> +static const struct exynos_ufs_phy_cfg exynos7_post_pwr_hs_cfg[] = {
> + PHY_COMN_REG_CFG(0x015, 0x00, PWR_MODE_HS_ANY),
> + PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_HS_ANY),
> + END_UFS_PHY_CFG
> +};
> +
> +static const struct exynos_ufs_phy_cfg *exynos7_ufs_phy_cfgs[CFG_TAG_MAX] = {
> + [CFG_PRE_INIT] = exynos7_pre_init_cfg,
> + [CFG_POST_INIT] = exynos7_post_init_cfg,
> + [CFG_PRE_PWR_HS] = exynos7_pre_pwr_hs_cfg,
> + [CFG_POST_PWR_HS] = exynos7_post_pwr_hs_cfg,
> +};
> +
> +static struct exynos_ufs_phy_drvdata exynos7_ufs_phy = {
> + .cfg = exynos7_ufs_phy_cfgs,
> + .isol = {
> + .offset = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL,
> + .mask = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK,
> + .en = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN,
> + },
> +};
> +
> +#endif /* _PHY_EXYNOS7_UFS_H_ */
> diff --git a/include/linux/phy/phy-exynos-ufs.h b/include/linux/phy/phy-exynos-ufs.h
> new file mode 100644
> index 0000000..0248de9
> --- /dev/null
> +++ b/include/linux/phy/phy-exynos-ufs.h

Er.. why do you want to introduce a header file in include/linux/phy/?
Is this going to be shared between multiple drivers?

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/