[PATCH 6/9] extcon: arizona: Additional settings to improve accuracy of HP detect

From: Charles Keepax
Date: Wed Sep 16 2015 - 06:06:43 EST


If the TST_CAP_SEL bits aren't set correctly on wm5110/8280 there will
be a 100k load along side the headphones, which will affect the accurary
towards the very top of the detection range. This patch sets those bits.

Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
---
drivers/extcon/extcon-arizona.c | 19 +++++++++++++++++--
1 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index d719ee7..6d35147b 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -43,6 +43,9 @@
#define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9
#define ARIZONA_MICD_CLAMP_MODE_JDH_GP5H 0xb

+#define ARIZONA_TST_CAP_DEFAULT 0x3
+#define ARIZONA_TST_CAP_CLAMP 0x1
+
#define ARIZONA_HPDET_MAX 10000

#define HPDET_DEBOUNCE 500
@@ -147,6 +150,7 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
{
struct arizona *arizona = info->arizona;
unsigned int mask = 0, val = 0;
+ unsigned int cap_sel = 0;
int ret;

switch (arizona->type) {
@@ -154,10 +158,21 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
case WM8280:
mask = ARIZONA_HP1L_SHRTO | ARIZONA_HP1L_FLWR |
ARIZONA_HP1L_SHRTI;
- if (clamp)
+ if (clamp) {
val = ARIZONA_HP1L_SHRTO;
- else
+ cap_sel = ARIZONA_TST_CAP_CLAMP;
+ } else {
val = ARIZONA_HP1L_FLWR | ARIZONA_HP1L_SHRTI;
+ cap_sel = ARIZONA_TST_CAP_DEFAULT;
+ }
+
+ ret = regmap_update_bits(arizona->regmap,
+ ARIZONA_HP_TEST_CTRL_1,
+ ARIZONA_HP1_TST_CAP_SEL_MASK,
+ cap_sel);
+ if (ret != 0)
+ dev_warn(arizona->dev,
+ "Failed to set TST_CAP_SEL: %d\n", ret);
break;
default:
mask = ARIZONA_RMV_SHRT_HP1L;
--
1.7.2.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/