Re: [BUG 4.2-rc8] Interrupt occurs while apply_alternatives() is patching the handler

From: Richard W.M. Jones
Date: Thu Sep 03 2015 - 03:53:50 EST


On Wed, Sep 02, 2015 at 08:05:12PM +0100, Richard W.M. Jones wrote:
> On Wed, Sep 02, 2015 at 11:11:55AM +0200, Thomas Gleixner wrote:
> > On Tue, 1 Sep 2015, Richard W.M. Jones wrote:
> > > On Sun, Aug 30, 2015 at 10:37:57PM -0400, Chuck Ebbert wrote:
> > > > This is from https://bugzilla.redhat.com/show_bug.cgi?id=1258223
> > > >
> > > > [ 0.036000] BUG: unable to handle kernel paging request at 55501e06
> > > [...]
> > > > [ 0.036000] [<c0409c80>] ? add_nops+0x90/0xa0
> > > > [ 0.036000] [<c040a054>] apply_alternatives+0x274/0x630
> > > > [ 0.036000] [<c07f1cf0>] ? wait_for_xmitr+0xa0/0xa0
> > > > [ 0.036000] [<c071a6fc>] ? sprintf+0x1c/0x20
> > > > [ 0.036000] [<c0aae480>] ? irq_entries_start+0x698/0x698
> > > > [ 0.036000] [<c071be4b>] ? memcpy+0xb/0x30
> > > > [ 0.036000] [<c07f3950>] ? serial8250_set_termios+0x20/0x20
> > > [...]
> > > > Interrupt 0x30 occurred while the alternatives code was replacing the
> > > > initial 0x90,0x90,0x90 NOPs (from the ASM_CLAC macro) with the optimized
> > > > version, 0x8d,0x76,0x00. Only the first byte has been replaced so far,
> > > > and it makes a mess out of the insn decoding.
> >
> > apply_alternatives() has two ways to modify the code:
> >
> > 1) text_poke_early()
> >
> > 2) optimize_nops()
> >
> > The former disables interrupts, the latter not. The patch below should
> > fix the issue.
>
> It has gone through about 1100 iterations so far without hitting the
> bug. I'll leave it running overnight.

That ran ~ 4000 iterations overnight, so it seems to work. You can
add:

Tested-by: Richard W.M. Jones <rjones@xxxxxxxxxx>

Thanks,

Rich.

> Rich.
>
> > Thanks,
> >
> > tglx
> >
> > diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
> > index c42827eb86cf..6a2f93e029f4 100644
> > --- a/arch/x86/kernel/alternative.c
> > +++ b/arch/x86/kernel/alternative.c
> > @@ -257,6 +257,9 @@ void __init arch_init_ideal_nops(void)
> > /* Use this to add nops to a buffer, then text_poke the whole buffer. */
> > static void __init_or_module add_nops(void *insns, unsigned int len)
> > {
> > + unsigned long flags;
> > +
> > + local_irq_save(flags);
> > while (len > 0) {
> > unsigned int noplen = len;
> > if (noplen > ASM_NOP_MAX)
> > @@ -265,6 +268,7 @@ static void __init_or_module add_nops(void *insns, unsigned int len)
> > insns += noplen;
> > len -= noplen;
> > }
> > + local_irq_restore(flags);
> > }
> >
> > extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
> >
> >
> >
>
> --
> Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
> Read my programming and virtualization blog: http://rwmj.wordpress.com
> virt-builder quickly builds VMs from scratch
> http://libguestfs.org/virt-builder.1.html

--
Richard Jones, Virtualization Group, Red Hat http://people.redhat.com/~rjones
Read my programming and virtualization blog: http://rwmj.wordpress.com
virt-df lists disk usage of guests without needing to install any
software inside the virtual machine. Supports Linux and Windows.
http://people.redhat.com/~rjones/virt-df/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/