Re: [PATCH] ARM: exynos_defconfig: Enable big.LITTLE CPUidle support

From: Javier Martinez Canillas
Date: Sat Aug 29 2015 - 06:48:00 EST


Hello Krzysztof,

On Sat, Aug 29, 2015 at 12:39 PM, Krzysztof Kozlowski
<k.kozlowski@xxxxxxxxxxx> wrote:
> 2015-08-29 19:31 GMT+09:00 Javier Martinez Canillas <javier@xxxxxxxxxxxx>:
>> Hello Krzysztof,
>>
>> On Sat, Aug 29, 2015 at 12:22 PM, Krzysztof Kozlowski
>> <k.kozlowski@xxxxxxxxxxx> wrote:
>>> 2015-08-29 19:07 GMT+09:00 Javier Martinez Canillas <javier@xxxxxxxxxxxx>:
>>>> Hello Krzysztof,
>>>>
>>>> On Sat, Aug 29, 2015 at 11:55 AM, Krzysztof Kozlowski
>>>> <k.kozlowski@xxxxxxxxxxx> wrote:
>>>>> 2015-08-29 18:33 GMT+09:00 Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>:
>>>>>> Hello Krzysztof,
>>>>>>
>>>>>> On 08/29/2015 11:01 AM, Krzysztof Kozlowski wrote:
>>>>>>> W dniu 28.08.2015 o 17:16, Javier Martinez Canillas pisze:
>>>>>>>> Some Exynos big.LITTLE boards (i.e: Exynos5420 and Exynos5800 based
>>>>>>>> Chromebooks) have proper firmware that allow the big.LITTLE CPUidle
>>>>>>>> driver to work correctly, so enable support for this.
>>>>>>>>
>>>>>>>> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
>>>>>>>>
>>>>>>>> ---
>>>>>>>> Kukjin and Krzysztof,
>>>>>>>>
>>>>>>>> As you know there are other boards like the Exynos5422 based Odroid XU{3,4}
>>>>>>>> whose firmware is broken due leaving CCI in secure mode which means that the
>>>>>>>> kernel MCPM support can't properly manage CCI.
>>>>>>>>
>>>>>>>> So if you pick this patch, it should be tested in kernelci before appearing
>>>>>>>> in linux-next to prevent any boot issues.
>>>>>>>>
>>>>>>>> But if that happens, I believe that is better to do a fix / workaround in
>>>>>>>> those broken platforms since nothing prevents users to enable this option
>>>>>>>> anyways. For example the CCI device node could be disabled in the DTS.
>>>>>>>>
>>>>>>>> arch/arm/configs/exynos_defconfig | 1 +
>>>>>>>> 1 file changed, 1 insertion(+)
>>>>>>>
>>>>>>> On Odroid XU3L (next-20150828, Hardkernel u-boot) boot hangs just after:
>>>>>>>
>>>>>>
>>>>>> Thanks for testing, I was expecting that is just that I don't have a
>>>>>> Odroid XU{3,4} board for test here, I guess I should get one.
>>>>>>
>>>>>>> [ 2.568650] dwmmc_exynos 12200000.mmc: num-slots property not found,
>>>>>>> assuming 1 slot is available
>>>>>>>
>>>>>>> ... so no. NACK :). First the boards, firmware, bootloader or kernel
>>>>>>
>>>>>> Agreed with the nack :)
>>>>>>
>>>>>>> code have to be fixed.
>>>>>>>
>>>>>>
>>>>>> Or disable CCI, could you please test the following patch [0] so I
>>>>>> can post it properly?
>>>>>
>>>>> It fixes the boot hang but causes other issues. Not all CPUs boot (I
>>>>
>>>> Thanks for testing.
>>>>
>>>>> tested it on Chanho Park's patch for fixing CPU boot with SWRESET):
>>>>> [ 0.010781] CPU0: update cpu_capacity 448
>>>>> [ 0.010839] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
>>>>> [ 0.011098] Setting up static identity map for 0x40008280 - 0x400082d8
>>>>> [ 0.056329] CPU1: update cpu_capacity 448
>>>>> [ 0.056337] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
>>>>> [ 0.071100] CPU2: update cpu_capacity 448
>>>>> [ 0.071107] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
>>>>> [ 0.086103] CPU3: update cpu_capacity 448
>>>>> [ 0.086111] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
>>>>> [ 0.101100] CPU4: update cpu_capacity 1535
>>>>> [ 0.101108] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
>>>>> [ 1.115009] CPU5: failed to boot: -110
>>>>> [ 2.130019] CPU6: failed to boot: -110
>>>>> [ 3.145049] CPU7: failed to boot: -110
>>>>> [ 3.145151] Brought up 5 CPUs
>>>>> [ 3.145196] SMP: Total of 5 processors activated (240.00 BogoMIPS).
>>>>> [ 3.145251] CPU: WARNING: CPU(s) started in wrong/inconsistent
>>>>> modes (primary CPU mode 0x13)
>>>>> [ 3.145327] CPU: This may indicate a broken bootloader or firmware.
>>>>> [ 3.149347] devtmpfs: initialized
>>>>>
>>>>
>>>> Sigh, such an inconsistent behavior between Exynos5420/5422/5800 boards :-/
>>>
>>> I put all my hope into Przemyslaw's work :)
>>>
>>
>> Me too :)
>>
>>>>
>>>> Any ideas? I agree that the b.L CPUidle support shouldn't be enabled
>>>> by default in exynos_defconfig but as I said nothing prevents the user
>>>> to enable that option and make the board to hang on boot.
>>>
>>> I think these are actually two different issues:
>>> 1. If user enables b.L cpuidle manually, some of the Exynos542x boards
>>> would work (Peach Pi, AFAIU?) and some would not (Odroid XU3, probably
>>
>> Yes, Exynos5800 Peach Pi and Exynos5420 Peach Pit IIRC.
>>
>>> also Arndale Octa). If we cannot fix firmware then we could implement
>>> a workaround in Exynos code. However it shouldn't be DTS but rather
>>> the mach code.
>>
>> Agreed about adding a workaround in mach code.
>>
>>> 2. The default config should be a reference config so it should work
>>> on all boards and should offer all necessary features on them (or even
>>> all features). Enabling the b.L in it makes sense only if it does not
>>> introduce regressions to other boards. If we cannot achieve that
>>> (Odroid XU3 will be affected negatively) then still we could fix issue
>>> #1 so user's manual setting would work.
>>>
>>
>> Yes but if we achieve #1, then I think that b.L CPUidle support should
>> be enabled by default in exynos_defconfig even when it does not work
>> on some boards (as long as don't affect negatively) so users of boards
>> that do work can have that feature out of the box without figuring out
>> what additional config options needs to be enabled.
>>
>> Or that's what you meant and I misunderstood?
>
> If there won't be negative impact then sure, it could be enabled.
> However as we saw above, disabling CCI (which is a fix for cpuidle b.L
> on XU3) has negative impact. Of course there could be other
> workarounds...
>

Yeah, I meant after / if we find a workaround in mach code as you
explained in #1.

> Best regards,
> Krzysztof

Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/