Re: [PATCH 2/2] dmaengine: pl330: event debug messages.

[Michal Suchanek]

On 19 August 2015 at 18:41, Vinod Koul <vinod.koul@xxxxxxxxx> wrote:
> On Tue, Jul 28, 2015 at 10:49:33AM +0000, Michal Suchanek wrote:
>> In pl330.c is a define which enables very verbose decoding of genereted
>> programs.
>>
>> Also add decoding of thread abort states and signalled events.
>>
>> Signed-off-by: Michal Suchanek <hramrach@xxxxxxxxx>
>> ---
>>  drivers/dma/pl330.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
>>  1 file changed, 53 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
>> index 257e0d9..9b02936 100644
>> --- a/drivers/dma/pl330.c
>> +++ b/drivers/dma/pl330.c
>> @@ -1318,6 +1318,10 @@ static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
>>       u8 *buf = req->mc_cpu;
>>       int off = 0;
>>
>> +     if (!dry_run)
>> +             dev_dbg(thrd->dmac->ddma.dev,
>> +                     "setting up request on thread %i", thrd->id);
>> +
>>       PL330_DBGMC_START(req->mc_bus);
>>
>>       /* DMAMOV CCR, ccr */
>> @@ -1545,6 +1549,20 @@ static int pl330_update(struct pl330_dmac *pl330)
>>               pl330->dmac_tbd.reset_mngr = true;
>>       else
>>               pl330->dmac_tbd.reset_mngr = false;
>> +#ifdef PL330_DEBUG_MCGEN
> do we need this here?

It's very verbose so I used the define for verbose debug since there
is one already.

>
>> +     if (val) {
>> +             val = readl(regs + FTM);
>> +             dev_info(pl330->ddma.dev,
>> +                      "Manager thread fault %s%s%s%s%s%s",
>> +                      (val & (1 << 30)) ? "dbg iface" : "sys mem",
>> +                      (val & (1 << 16)) ? " fetch error" : "",
>> +                      (val & (1 << 5)) ? " event sec error" : "",
>> +                      (val & (1 << 4)) ? " channel sec error" : "",
>> +                      (val & (1 << 1)) ? " invalid operand" : "",
>> +                      (val & (1 << 0)) ? " invalid instruction" : ""
>> +                     );
>> +     }
>> +#endif
>>
>>       val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
>>       pl330->dmac_tbd.reset_chan |= val;
>> @@ -1552,10 +1570,41 @@ static int pl330_update(struct pl330_dmac *pl330)
>>               int i = 0;
>>               while (i < pl330->pcfg.num_chan) {
>>                       if (val & (1 << i)) {
>> +                             u32 fault = readl(regs + FTC(i));
>> +#ifdef PL330_DEBUG_MCGEN
>> +                             dev_info(pl330->ddma.dev,
>> +                                      "DMA thread fault"
>> +                                      "%s%s%s%s%s%s%s%s%s%s%s%s",
> This break grep! also looks very ugly and should be a dev_debug rather

It looks ugly indeed but I have no idea how to decode flag bitfield
into string in some more sensible way.

If you have an example of nice code doing this please share.

I did not even hit this one since the thread just stalls waiting for
device and does not fault in my case.

Thanks

Michal
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/