Re: [PATCH v2 4/4] irqchip: GIC: Don't deactivate interrupts forwarded to a guest

From: Eric Auger
Date: Tue Aug 18 2015 - 04:27:04 EST


Hi Marc,
On 08/13/2015 10:28 AM, Marc Zyngier wrote:
> Commit 0a4377de3056 ("genirq: Introduce irq_set_vcpu_affinity() to
> target an interrupt to a VCPU") added just what we needed at the
> lowest level to allow an interrupt to be deactivated by a guest.
>
> When such a request reaches the GIC, it knows it doesn't need to
> perform the deactivation anymore, and can safely leave the guest
> do its magic. This of course requires additional support in both
> VFIO and KVM.
>
> Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
> ---
> drivers/irqchip/irq-gic.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 58 insertions(+)
>
> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
> index b020c3a..ea691be 100644
> --- a/drivers/irqchip/irq-gic.c
> +++ b/drivers/irqchip/irq-gic.c
> @@ -148,6 +148,34 @@ static inline bool primary_gic_irq(struct irq_data *d)
> return true;
> }
>
> +static inline bool cascading_gic_irq(struct irq_data *d)
> +{
> + /*
> + * If handler_data pointing to one of the secondary GICs, then
> + * this is the cascading interrupt, and it cannot possibly be
a cascading interrupt?
> + * forwarded.
> + */
> + if (d->handler_data >= (void *)(gic_data + 1) &&
> + d->handler_data < (void *)(gic_data + MAX_GIC_NR))
there is an accessor for d->handler_data: irq_data_get_irq_handler_data

besides:
Reviewed-by: Eric Auger <eric.auger@xxxxxxxxxx>
Tested-by: Eric Auger <eric.auger@xxxxxxxxxx> on Calxeda Midway with
VFIO SPI assignment

Best Regards

Eric


> + return true;
> +
> + return false;
> +}
> +
> +static inline bool forwarded_irq(struct irq_data *d)
> +{
> + /*
> + * A forwarded interrupt:
> + * - is on the primary GIC
> + * - has its handler_data set to a value
> + * - that isn't a secondary GIC
> + */
> + if (primary_gic_irq(d) && d->handler_data && !cascading_gic_irq(d))
> + return true;
> +
> + return false;
> +}
> +
> /*
> * Routines to acknowledge, disable and enable interrupts
> */
> @@ -166,6 +194,18 @@ static int gic_peek_irq(struct irq_data *d, u32 offset)
> static void gic_mask_irq(struct irq_data *d)
> {
> gic_poke_irq(d, GIC_DIST_ENABLE_CLEAR);
> + /*
> + * When masking a forwarded interrupt, make sure it is
> + * deactivated as well.
> + *
> + * This ensures that an interrupt that is getting
> + * disabled/masked will not get "stuck", because there is
> + * noone to deactivate it (guest is being terminated).
> + */
> + if (static_key_true(&supports_deactivate)) {
> + if (forwarded_irq(d))
> + gic_poke_irq(d, GIC_DIST_ACTIVE_CLEAR);
> + }
> }
>
> static void gic_unmask_irq(struct irq_data *d)
> @@ -178,6 +218,10 @@ static void gic_eoi_irq(struct irq_data *d)
> u32 deact_offset = GIC_CPU_EOI;
>
> if (static_key_true(&supports_deactivate)) {
> + /* Do not deactivate an IRQ forwarded to a vcpu. */
> + if (forwarded_irq(d))
> + return;
> +
> if (primary_gic_irq(d))
> deact_offset = GIC_CPU_DEACTIVATE;
> }
> @@ -251,6 +295,19 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
> return gic_configure_irq(gicirq, type, base, NULL);
> }
>
> +static int gic_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu)
> +{
> + /* Only interrupts on the primary GIC can be forwarded to a vcpu. */
> + if (static_key_true(&supports_deactivate)) {
> + if (primary_gic_irq(d) && !cascading_gic_irq(d)) {
> + d->handler_data = vcpu;
> + return 0;
> + }
> + }
> +
> + return -EINVAL;
> +}
> +
> #ifdef CONFIG_SMP
> static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
> bool force)
> @@ -346,6 +403,7 @@ static struct irq_chip gic_chip = {
> #endif
> .irq_get_irqchip_state = gic_irq_get_irqchip_state,
> .irq_set_irqchip_state = gic_irq_set_irqchip_state,
> + .irq_set_vcpu_affinity = gic_irq_set_vcpu_affinity,
> .flags = IRQCHIP_SET_TYPE_MASKED,
> };
>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/