Re: [PATCH] net: phy: workaround for buggy cable detection by LAN8700 after cable plugging

[Joe Perches]

On Thu, 2015-08-13 at 16:12 +0300, Igor Plyatov wrote:
> * Due to HW bug, LAN8700 sometimes does not detect presence of energy in the
>   Ethernet cable in Energy Detect Power-Down mode (e.g while EDPWRDOWN bit is
>   set, the ENERGYON bit does not asserted sometimes). This is a common bug of
>   LAN87xx family of PHY chips.
> * The lan87xx_read_status() was improved to acquire ENERGYON bit. Its previous
>   algorythm still not reliable on 100 % and sometimes skip cable plugging.
[]
> diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
[]
> @@ -104,10 +104,12 @@ static int lan911x_config_init(struct phy_device *phydev)
>  static int lan87xx_read_status(struct phy_device *phydev)
>  {
>  	int err = genphy_read_status(phydev);
> +	int rc;

Is there a reason to move this declaration?

> +	int i;
>  
>  	if (!phydev->link) {
>  		/* Disable EDPD to wake up PHY */
> -		int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
> +		rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
>  		if (rc < 0)
>  			return rc;
>  


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/