[PATCH v3 0/5] ARM: berlin: PWM support

From: Antoine Tenart
Date: Wed Aug 12 2015 - 09:51:45 EST


Hi all,

This series adds a driver for the Marvell Berlin PWM controller, which
has 4 channels.

This has been tested on a BG2Q DMP.

Thanks,

Antoine

Changes since v2:
- Reworked the prescaler/tcnt calculation
- Added an input clock
- Updated the documentation
- Reordered the pwm node
- Added some definition for BIT()

Changes since v1:
- Added a sentinel in berlin_pwm_match[]

Antoine Tenart (5):
pwm: add the Berlin pwm controller driver
Documentation: bindings: document the Berlin PWM driver
ARM: berlin: add a PWM node on the BG2Q
ARM: berlin: add a PWM node on the BG2
ARM: berlin: add a PWM node on the BG2CD

.../devicetree/bindings/pwm/pwm-berlin.txt | 19 ++
arch/arm/boot/dts/berlin2.dtsi | 7 +
arch/arm/boot/dts/berlin2cd.dtsi | 7 +
arch/arm/boot/dts/berlin2q.dtsi | 7 +
drivers/pwm/Kconfig | 9 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-berlin.c | 227 +++++++++++++++++++++
7 files changed, 277 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/pwm-berlin.txt
create mode 100644 drivers/pwm/pwm-berlin.c

--
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/