Re: [PATCH v2 1/2] i2c: mediatek: Reset DMA engine in hardware init function

From: Daniel Kurtz
Date: Tue Aug 11 2015 - 04:33:07 EST


On Thu, Aug 6, 2015 at 3:22 PM, Eddie Huang <eddie.huang@xxxxxxxxxxxx> wrote:
> Reset DMA in hardware init function to avoid unknown hardware state
> before do any I2C operation.
>
> Signed-off-by: Liguo Zhang <liguo.zhang@xxxxxxxxxxxx>
> Signed-off-by: Eddie Huang <eddie.huang@xxxxxxxxxxxx>

Reviewed-by: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>

> ---
> drivers/i2c/busses/i2c-mt65xx.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> index 9920eef..e28ad4c 100644
> --- a/drivers/i2c/busses/i2c-mt65xx.c
> +++ b/drivers/i2c/busses/i2c-mt65xx.c
> @@ -59,6 +59,7 @@
> #define I2C_DMA_START_EN 0x0001
> #define I2C_DMA_INT_FLAG_NONE 0x0000
> #define I2C_DMA_CLR_FLAG 0x0000
> +#define I2C_DMA_HARD_RST 0x0002
>
> #define I2C_DEFAULT_SPEED 100000 /* hz */
> #define MAX_FS_MODE_SPEED 400000
> @@ -81,6 +82,7 @@ enum DMA_REGS_OFFSET {
> OFFSET_INT_FLAG = 0x0,
> OFFSET_INT_EN = 0x04,
> OFFSET_EN = 0x08,
> + OFFSET_RST = 0x0c,
> OFFSET_CON = 0x18,
> OFFSET_TX_MEM_ADDR = 0x1c,
> OFFSET_RX_MEM_ADDR = 0x20,
> @@ -262,6 +264,10 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
> I2C_CONTROL_CLK_EXT_EN | I2C_CONTROL_DMA_EN;
> writew(control_reg, i2c->base + OFFSET_CONTROL);
> writew(I2C_DELAY_LEN, i2c->base + OFFSET_DELAY_LEN);
> +
> + writel(I2C_DMA_HARD_RST, i2c->pdmabase + OFFSET_RST);
> + udelay(50);
> + writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
> }
>
> /*
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/