Re: [RFC PATCH v4 1/9] mmc: dw_mmc: Add external dma interface support

[Krzysztof Kozlowski]

On 06.08.2015 16:26, Shawn Lin wrote:
> å 2015/8/6 15:08, Krzysztof Kozlowski åé:
>> On 06.08.2015 15:44, Shawn Lin wrote:
>>> DesignWare MMC Controller can supports two types of DMA
>>> mode: external dma and internal dma. We get a RK312x platform
>>> integrated dw_mmc and ARM pl330 dma controller. This patch add
>>> edmac ops to support these platforms. I've tested it on RK312x
>>> platform with edmac mode and RK3288 platform with idmac mode.
>>>
>>> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
>>>
>>> ---
>>>
>>> Changes in v4:
>>> - remove "host->trans_mode" and use "host->use_dma" to indicate
>>>    transfer mode.
>>> - remove all bt-bindings' changes since we don't need new properities.
>>> - check transfer mode at runtime by reading HCON reg
>>> - spilt defconfig changes for each sub-architecture
>>> - fix the title of cover letter
>> How did you fixed the title? It is still empty :)
>>     Subject: [RFC PATCH v4 0/9]
>   I mentioned that in ChangeLog-v4 but unfortunately I forgot it.
>   Thanks, Krzysztof.  I will be more careful and add it for next version.
> 
>>
>>> - reuse some code for reducing code size
>>>
>>> Changes in v3:
>>> - choose transfer mode at runtime
>>> - remove all CONFIG_MMC_DW_IDMAC config option
>>> - add supports-idmac property for some platforms
>>>
>>> Changes in v2:
>>> - Fix typo of dev_info msg
>>> - remove unused dmach from declaration of dw_mci_dma_slave
>>>
>>>   drivers/mmc/host/Kconfig        |  11 +-
>>>   drivers/mmc/host/dw_mmc-pltfm.c |   2 +
>>>   drivers/mmc/host/dw_mmc.c       | 258
>>> ++++++++++++++++++++++++++++++++--------
>>>   include/linux/mmc/dw_mmc.h      |  27 ++++-
>>>   4 files changed, 232 insertions(+), 66 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>>> index 6a0f9c7..a86c0eb 100644
>>> --- a/drivers/mmc/host/Kconfig
>>> +++ b/drivers/mmc/host/Kconfig
>>> @@ -607,15 +607,7 @@ config MMC_DW
>>>       help
>>>         This selects support for the Synopsys DesignWare Mobile
>>> Storage IP
>>>         block, this provides host support for SD and MMC interfaces,
>>> in both
>>> -      PIO and external DMA modes.
>>> -
>>> -config MMC_DW_IDMAC
>>> -    bool "Internal DMAC interface"
>>> -    depends on MMC_DW
>>> -    help
>>> -      This selects support for the internal DMAC block within the
>>> Synopsys
>>> -      Designware Mobile Storage IP block. This disables the external
>>> DMA
>>> -      interface.
>>> +      PIO, internal DMA mode and external DMA modes.
>>>     config MMC_DW_PLTFM
>>>       tristate "Synopsys Designware MCI Support as platform device"
>>> @@ -644,7 +636,6 @@ config MMC_DW_K3
>>>       tristate "K3 specific extensions for Synopsys DW Memory Card
>>> Interface"
>>>       depends on MMC_DW
>>>       select MMC_DW_PLTFM
>>> -    select MMC_DW_IDMAC
>>>       help
>>>         This selects support for Hisilicon K3 SoC specific extensions
>>> to the
>>>         Synopsys DesignWare Memory Card Interface driver. Select this
>>> option
>>> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c
>>> b/drivers/mmc/host/dw_mmc-pltfm.c
>>> index ec6dbcd..7e1d13b 100644
>>> --- a/drivers/mmc/host/dw_mmc-pltfm.c
>>> +++ b/drivers/mmc/host/dw_mmc-pltfm.c
>>> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device
>>> *pdev,
>>>       host->pdata = pdev->dev.platform_data;
>>>         regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> +    /* Get registers' physical base address */
>>> +    host->phy_regs = (void *)(regs->start);
>>>       host->regs = devm_ioremap_resource(&pdev->dev, regs);
>>>       if (IS_ERR(host->regs))
>>>           return PTR_ERR(host->regs);
>>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>>> index 40e9d8e..5d6cdff 100644
>>> --- a/drivers/mmc/host/dw_mmc.c
>>> +++ b/drivers/mmc/host/dw_mmc.c
>>> @@ -56,7 +56,7 @@
>>>   #define DW_MCI_FREQ_MAX    200000000    /* unit: HZ */
>>>   #define DW_MCI_FREQ_MIN    400000        /* unit: HZ */
>>>   -#ifdef CONFIG_MMC_DW_IDMAC
>>> +
>>>   #define IDMAC_INT_CLR        (SDMMC_IDMAC_INT_AI |
>>> SDMMC_IDMAC_INT_NI | \
>>>                    SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \
>>>                    SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
>>> @@ -99,7 +99,6 @@ struct idmac_desc {
>>>         __le32        des3;    /* buffer 2 physical address */
>>>   };
>>> -#endif /* CONFIG_MMC_DW_IDMAC */
>>>     static bool dw_mci_reset(struct dw_mci *host);
>>>   static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
>>> @@ -403,7 +402,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data)
>>>           return DMA_FROM_DEVICE;
>>>   }
>>>   -#ifdef CONFIG_MMC_DW_IDMAC
>>>   static void dw_mci_dma_cleanup(struct dw_mci *host)
>>>   {
>>>       struct mmc_data *data = host->data;
>>> @@ -441,12 +439,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci
>>> *host)
>>>       mci_writel(host, BMOD, temp);
>>>   }
>>>   -static void dw_mci_idmac_complete_dma(struct dw_mci *host)
>>> +static void dw_mci_dmac_complete_dma(void *arg)
>>>   {
>>> +    struct dw_mci *host = arg;
>> Why changing the argument to void*?
> 
> This function will be used as callback hook of dmaengine, and the
> prototype is
> "typedef void (*dma_async_tx_callback)(void *dma_async_param);".
> w/o this change, we meet a warning  for incompatible pointer case.

Thanks for clarifying.

Best regards,
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/