Re: [PATCH] pci/pciehp: bail on bogus pcie reads from removed devices

[Jarod Wilson]

Re-sending, hopefully without multi-part now, so it gets to the list.
Temporarily forced into using a different mail client...

On Tue, Aug 4, 2015 at 10:05 AM, Jarod Wilson <jarod@xxxxxxxxxx> wrote:
> On Mon, Aug 3, 2015 at 12:14 AM, Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote:
>>
>> On Tue, Jul 21, 2015 at 12:25:30PM -0400, Jarod Wilson wrote:
>> > https://bugzilla.kernel.org/show_bug.cgi?id=99841
>> >
>> > Seems like a read of all 1's from a register of a device that has gone
>> > away should be taken as a sign that the device has gone away.
>> > Section 6.2.10 of the PCIE spec (v4.0, rev 0.3, Feb 19, 2014) suggests
>> > as
>> > much with this snippet:
>> >
>> > |IMPLEMENTATION NOTE
>> > |Data Value of All 1âs
>> > |Many platforms, including those supporting RP Extensions for DPC, can
>> > |return a data value of all 1âs to software when an error is associated
>> > |with a PCI Express Configuration, I/O, or Memory Read Request. During
>> > DPC,
>> > |the Downstream Port discards Requests destined for the Link and
>> > completes
>> > |them with an error (i.e., either with an Unsupported Request (UR) or
>> > |Completer Abort (CA) Completion Status). By ending a series of MMIO or
>> > |configuration space operations with a read to an address with a known
>> > |data value not equal to all 1âs, software may determine if a Completer
>> > |has been removed or DPC has been triggered.
>> >
>> > I'm not sure the above is directly relevant to this case, but the same
>> > principle (reading all 1's means the device is probably gone) seems to
>> > hold.
>> >
>> > This is based on part of a debugging patch Bjorn posted in the
>> > referenced
>> > bugzilla, and its required to make the HP ZBook G2 I've got here not
>> > barf
>> > when disconnecting a thunderbolt ethernet adapter and corrupt memory.
>> >
>> > Suggested-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
>> > CC: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
>> > CC: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
>> > CC: linux-pci@xxxxxxxxxxxxxxx
>> > Signed-off-by: Jarod Wilson <jarod@xxxxxxxxxx>
>>
>> Hi Jarod,
>>
>> I think there are two issues here:
>>
>>   1) pciehp doesn't handle all 1's correctly
>>   2) use-after-free of hotplug_slot
>>
>> This patch is for the first issue.  I think it's correct, but I still
>> have a question or two.   I attached an updated version of the patch
>> and changelog.
>>
>> Here's the path I think we're taking: 03:03.0 receives pciehp
>> interrupt for removal (link down and card not present), and we call
>> pciehp_unconfigure_device() for 05:00.0 and everything downstream from
>> it.  Part of this is removing 06:00.0.  I expected this would use this
>> path:
>>
>>   pcie_port_remove_service            # .remove method for 06:00.0
>>     dev_printk("unloading service driver ...")
>>     pciehp_remove                     # hpdriver_portdrv.remove
>>       pciehp_release_ctrl
>>         pcie_shutdown_notification
>>           pcie_disable_notification
>>             pcie_write_cmd
>>               pcie_do_write_cmd(..., true)    # wait
>>                 pcie_wait_cmd
>>                   pcie_poll_cmd
>>                     read PCI_EXP_SLTSTA        # would get 0xffff
>>                 read PCI_EXPT_SLTCTL        # would get 0xffff
>>
>> so I added checks for ~0 data in pcie_poll_cmd() and
>> pcie_do_write_cmd().
>>
>> But the dmesg log shows that we were in pcie_isr(), and I don't
>> understand yet how we got there.  Can you help figure that out?  Maybe
>> put a dump_stack() in pcie_isr() or something?
>
>
> pciehp_power_thread looks to be the entry point.
>
> [ 1949.102247] pciehp 0000:03:03.0:pcie24: pcie_isr: intr_loc 108
> [ 1949.102252] pciehp 0000:03:03.0:pcie24: Presence/Notify input change
> [ 1949.102256] pciehp 0000:03:03.0:pcie24: Card not present on Slot(3)
> [ 1949.102262] pciehp 0000:03:03.0:pcie24: Data Link Layer State change
> [ 1949.102266] pciehp 0000:03:03.0:pcie24: slot(3): Link Down event
> [ 1949.102281] pciehp 0000:03:03.0:pcie24: Surprise Removal
> [ 1949.102286] pciehp 0000:03:03.0:pcie24: Link Down event ignored on
> slot(3): already powering off
> [ 1949.102288] pciehp 0000:03:03.0:pcie24: Disabling
> domain:bus:device=0000:05:00
> [ 1949.102290] pciehp 0000:03:03.0:pcie24: pciehp_unconfigure_device:
> domain:bus:dev = 0000:05:00
> [ 1950.321907] tg3 0000:07:00.0: tg3_abort_hw timed out, TX_MODE_ENABLE will
> not clear MAC_TX_MODE=ffffffff
> [ 1950.525986] [sched_delayed] sched: RT throttling activated
> [ 1950.544164] pciehp 0000:06:00.0:pcie24: unloading service driver pciehp
> [ 1950.544170] pciehp 0000:06:00.0:pcie24: release_slot: physical_slot = 9
> [ 1950.545016] pciehp 0000:06:00.0:pcie24: Timeout on hotplug command 0x1038
> (issued 19092 msec ago)
> [ 1950.545020] pciehp 0000:06:00.0:pcie24: pcie_do_write_cmd: no response
> from device
> [ 1950.545021] pciehp 0000:06:00.0:pcie24: pcie_disable_notification:
> SLOTCTRL d8 write cmd 0
> [ 1950.545025] pciehp 0000:06:00.0:pcie24: Device has gone away
> [ 1950.545027] CPU: 0 PID: 12361 Comm: kworker/0:2 Not tainted
> 3.10.0-302.el7.hp.x86_64 #1
> [ 1950.545028] Hardware name: Hewlett-Packard HP ZBook 15 G2/2253, BIOS M70
> Ver. 01.07 02/26/2015
> [ 1950.545033] Workqueue: pciehp-3 pciehp_power_thread
> [ 1950.545034]  0000000000000000 00000000f721dd13 ffff8804822ffa78
> ffffffff81632729
> [ 1950.545036]  ffff8804822ffac0 ffffffff8133bf64 ffff00000000002e
> 00000000f721dd13
> [ 1950.545038]  ffff8804818fab00 ffff880468f70cc0 000000000000002e
> 0000000000000282
> [ 1950.545039] Call Trace:
> [ 1950.545044]  [<ffffffff81632729>] dump_stack+0x19/0x1b
> [ 1950.545046]  [<ffffffff8133bf64>] pcie_isr+0x264/0x280
> [ 1950.545048]  [<ffffffff8111b6b9>] __free_irq+0x189/0x220
> [ 1950.545049]  [<ffffffff8111b7e9>] free_irq+0x49/0xb0
> [ 1950.545051]  [<ffffffff8133d3b9>] pciehp_release_ctrl+0xb9/0xe0
> [ 1950.545053]  [<ffffffff81339db3>] pciehp_remove+0x23/0x30
> [ 1950.545055]  [<ffffffff8133442e>] pcie_port_remove_service+0x4e/0x60
> [ 1950.545058]  [<ffffffff813f39ff>] __device_release_driver+0x7f/0xf0
> [ 1950.545059]  [<ffffffff813f3a93>] device_release_driver+0x23/0x30
> [ 1950.545061]  [<ffffffff813f3208>] bus_remove_device+0x108/0x180
> [ 1950.545062]  [<ffffffff813ef725>] device_del+0x135/0x1f0
> [ 1950.545064]  [<ffffffff81334360>] ? cleanup_service_irqs+0x40/0x40
> [ 1950.545065]  [<ffffffff813ef7fe>] device_unregister+0x1e/0x60
> [ 1950.545066]  [<ffffffff81334381>] remove_iter+0x21/0x30
> [ 1950.545068]  [<ffffffff813ef093>] device_for_each_child+0x53/0x90
> [ 1950.545069]  [<ffffffff81334ae2>] pcie_port_device_remove+0x22/0x40
> [ 1950.545070]  [<ffffffff81334e1e>] pcie_portdrv_remove+0xe/0x10
> [ 1950.545074]  [<ffffffff813266eb>] pci_device_remove+0x3b/0xb0
> [ 1950.545075]  [<ffffffff813f39ff>] __device_release_driver+0x7f/0xf0
> [ 1950.545077]  [<ffffffff813f3a93>] device_release_driver+0x23/0x30
> [ 1950.545078]  [<ffffffff8131fa54>] pci_stop_bus_device+0x94/0xa0
> [ 1950.545079]  [<ffffffff8131f9fb>] pci_stop_bus_device+0x3b/0xa0
> [ 1950.545081]  [<ffffffff8131fb42>]
> pci_stop_and_remove_bus_device+0x12/0x20
> [ 1950.545082]  [<ffffffff8133b8a0>] pciehp_unconfigure_device+0xb0/0x1b0
> [ 1950.545084]  [<ffffffff8133b282>] pciehp_disable_slot+0x52/0xd0
> [ 1950.545085]  [<ffffffff8133b3ea>] pciehp_power_thread+0xea/0x150
> [ 1950.545088]  [<ffffffff8109c57b>] process_one_work+0x17b/0x470
> [ 1950.545089]  [<ffffffff8109d34b>] worker_thread+0x11b/0x400
> [ 1950.545090]  [<ffffffff8109d230>] ? rescuer_thread+0x400/0x400
> [ 1950.545093]  [<ffffffff810a4a6f>] kthread+0xcf/0xe0
> [ 1950.545094]  [<ffffffff810a49a0>] ? kthread_create_on_node+0x140/0x140
> [ 1950.545097]  [<ffffffff81642d58>] ret_from_fork+0x58/0x90
> [ 1950.545099]  [<ffffffff810a49a0>] ? kthread_create_on_node+0x140/0x140
>
>
> I get pretty much identical stacks for these devices as well, in this order
> after the above:
> [ 1959.103493] pciehp 0000:03:06.0:pcie24: Device has gone away
> [ 1959.104152] pciehp 0000:03:05.0:pcie24: Device has gone away
> [ 1959.104736] pciehp 0000:03:04.0:pcie24: Device has gone away
> [ 1959.105265] pciehp 0000:03:03.0:pcie24: Device has gone away
> [ 1959.105841] pciehp 0000:03:00.0:pcie24: Device has gone away
>
>
> --jarod
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/