[patch|rfc] mtip32x: fix regression introduced by blk-mq per-hctx flush

From: Jeff Moyer
Date: Wed Jul 29 2015 - 10:22:57 EST


Hi,

After commit f70ced091707 (blk-mq: support per-distpatch_queue flush
machinery), the mtip32xx driver may oops upon module load due to walking
off the end of an array in mtip_init_cmd. On initialization of the
flush_rq, init_request is called with request_index >= the maximum queue
depth the driver supports. For mtip32xx, this value is used to index
into an array. What this means is that the driver will walk off the end
of the array, and either oops or cause random memory corruption.

The problem is easily reproduced by doing modprobe/rmmod of the mtip32xx
driver in a loop. I can typically reproduce the problem in about 30
seconds.

Now, in the case of mtip32xx, it actually doesn't support flush/fua, so
I think we can simply return without doing anything. In addition, no
other mq-enabled driver does anything with the request_index passed into
init_request(), so no other driver is affected. However, I'm not really
sure what is expected of drivers. Ming, what did you envision drivers
would do when initializing the flush requests?

Signed-off-by: Jeff Moyer <jmoyer@xxxxxxxxxx>

diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c
index 4a2ef09..f504232 100644
--- a/drivers/block/mtip32xx/mtip32xx.c
+++ b/drivers/block/mtip32xx/mtip32xx.c
@@ -3756,6 +3756,14 @@ static int mtip_init_cmd(void *data, struct request *rq, unsigned int hctx_idx,
struct mtip_cmd *cmd = blk_mq_rq_to_pdu(rq);
u32 host_cap_64 = readl(dd->mmio + HOST_CAP) & HOST_CAP_64;

+ /*
+ * For flush requests, request_idx starts at the end of the
+ * tag space. Since we don't support FLUSH/FUA, simply return
+ * 0 as there's nothing to be done.
+ */
+ if (request_idx >= MTIP_MAX_COMMAND_SLOTS)
+ return 0;
+
cmd->command = dmam_alloc_coherent(&dd->pdev->dev, CMD_DMA_ALLOC_SZ,
&cmd->command_dma, GFP_KERNEL);
if (!cmd->command)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/