[PATCH v4 1/7] clocksource: mips-gic: Enable the clock before using it

From: Govindraj Raja
Date: Mon Jul 27 2015 - 10:02:20 EST


From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>

For the clock to be used (e.g. get its rate through clk_get_rate)
it should be prepared and enabled first.

Also, while the clock is enabled the driver must hold a reference to it,
so let's remove the call to clk_put.

Reviewed-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
---
drivers/clocksource/mips-gic-timer.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
index b81ed1a..913585d 100644
--- a/drivers/clocksource/mips-gic-timer.c
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -158,8 +158,13 @@ static void __init gic_clocksource_of_init(struct device_node *node)

clk = of_clk_get(node, 0);
if (!IS_ERR(clk)) {
+ if (clk_prepare_enable(clk) < 0) {
+ pr_err("GIC failed to enable clock\n");
+ clk_put(clk);
+ return;
+ }
+
gic_frequency = clk_get_rate(clk);
- clk_put(clk);
} else if (of_property_read_u32(node, "clock-frequency",
&gic_frequency)) {
pr_err("GIC frequency not specified.\n");
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/