[RFCv2 3/3] reset: reset-zynq: Adding support for Xilinx Zynq reset controller.

[Moritz Fischer]

This adds a reset controller driver to control the Xilinx Zynq
SoC's various resets.

Signed-off-by: Moritz Fischer <moritz.fischer@xxxxxxxxx>
---
 drivers/reset/Makefile     |   1 +
 drivers/reset/reset-zynq.c | 142 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 143 insertions(+)
 create mode 100644 drivers/reset/reset-zynq.c

diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 157d421..3fe50e7 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
 obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_ARCH_STI) += sti/
+obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
diff --git a/drivers/reset/reset-zynq.c b/drivers/reset/reset-zynq.c
new file mode 100644
index 0000000..05e37f8
--- /dev/null
+++ b/drivers/reset/reset-zynq.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright (c) 2015, National Instruments Corp.
+ *
+ * Xilinx Zynq Reset controller driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+/* Offsets into SLCR regmap */
+#define SLCR_RST_CTRL_OFFSET	0x200 /* FPGA Software Reset Control */
+
+#define NBANKS	18
+
+struct zynq_reset_data {
+	struct regmap *slcr;
+	struct reset_controller_dev rcdev;
+};
+
+#define to_zynq_reset_data(p)		\
+	container_of((p), struct zynq_reset_data, rcdev)
+
+static int zynq_reset_assert(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	struct zynq_reset_data *priv = to_zynq_reset_data(rcdev);
+
+	int bank = id / BITS_PER_LONG;
+	int offset = id % BITS_PER_LONG;
+
+	regmap_update_bits(priv->slcr,
+			   SLCR_RST_CTRL_OFFSET + (bank * 4),
+			   BIT(offset),
+			   BIT(offset));
+
+	return 0;
+}
+
+static int zynq_reset_deassert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct zynq_reset_data *priv = to_zynq_reset_data(rcdev);
+
+	int bank = id / BITS_PER_LONG;
+	int offset = id % BITS_PER_LONG;
+
+	regmap_update_bits(priv->slcr,
+			   SLCR_RST_CTRL_OFFSET + (bank * 4),
+			   BIT(offset),
+			   ~BIT(offset));
+
+	return 0;
+}
+
+static int zynq_reset_status(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	struct zynq_reset_data *priv = to_zynq_reset_data(rcdev);
+
+	int bank = id / BITS_PER_LONG;
+	int offset = id % BITS_PER_LONG;
+	u32 reg;
+
+	regmap_read(priv->slcr, SLCR_RST_CTRL_OFFSET + (bank * 4), &reg);
+
+	return !(reg & BIT(offset));
+}
+
+static const struct reset_control_ops zynq_reset_ops = {
+	.assert		= zynq_reset_assert,
+	.deassert	= zynq_reset_deassert,
+	.status		= zynq_reset_status,
+};
+
+static int zynq_reset_probe(struct platform_device *pdev)
+{
+	struct zynq_reset_data *priv;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, priv);
+
+	priv->slcr = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+		"syscon");
+	if (IS_ERR(priv->slcr)) {
+		dev_err(&pdev->dev, "unable to get zynq-slcr regmap");
+		return PTR_ERR(priv->slcr);
+	}
+
+	priv->rcdev.owner = THIS_MODULE;
+	priv->rcdev.nr_resets = NBANKS * BITS_PER_LONG;
+	priv->rcdev.ops = &zynq_reset_ops;
+	priv->rcdev.of_node = pdev->dev.of_node;
+	reset_controller_register(&priv->rcdev);
+
+	return 0;
+}
+
+static int zynq_reset_remove(struct platform_device *pdev)
+{
+	struct zynq_reset_data *priv = platform_get_drvdata(pdev);
+
+	reset_controller_unregister(&priv->rcdev);
+
+	return 0;
+}
+
+static const struct of_device_id zynq_reset_dt_ids[] = {
+	{ .compatible = "xlnx,zynq-reset", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver zynq_reset_driver = {
+	.probe	= zynq_reset_probe,
+	.remove	= zynq_reset_remove,
+	.driver = {
+		.name		= "zynq-pl-reset",
+		.of_match_table	= zynq_reset_dt_ids,
+	},
+};
+module_platform_driver(zynq_reset_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Moritz Fischer <moritz.fischer@xxxxxxxxx>");
+MODULE_DESCRIPTION("Zynq Reset Controller Driver");
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/