Re: [PATCH 2/4] x86/pat: Merge pat_init_cache_modes() into its caller

From: Juergen Gross
Date: Sun May 31 2015 - 07:02:54 EST


On 05/31/2015 12:23 PM, Borislav Petkov wrote:
On Sun, May 31, 2015 at 11:48:04AM +0200, Borislav Petkov wrote:
From: Borislav Petkov <bp@xxxxxxx>

This way we can pass pat MSR value directly.

This breaks xen as that function is used there, doh. :-\

JÃrgen,

can you check the enlighten.c changes below please?

Acked-by: Juergen Gross <jgross@xxxxxxxx>


I'm reading xen's PAT config from MSR_IA32_CR_PAT and handing it down to
pat_init_cache_modes(). That shouldn't change current behavior AFAICT
because pat_init_cache_modes() did it itself before.

Right?

Thanks.

---
Author: Borislav Petkov <bp@xxxxxxx>
Date: Sat May 30 13:09:55 2015 +0200

x86/pat: Emulate PAT when it is disabled

In the case when PAT is disabled on the command line with "nopat" or
when virtualization doesn't support PAT (correctly) - see

9d34cfdf4796 ("x86: Don't rely on VMWare emulating PAT MSR correctly").

we emulate it using the PWT and PCD cache attribute bits. Get rid of
boot_pat_state while at it.

Based on a conglomerate patch from Toshi Kani.

Signed-off-by: Borislav Petkov <bp@xxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
Cc: arnd@xxxxxxxx
Cc: Elliott@xxxxxx
Cc: hch@xxxxxx
Cc: hmh@xxxxxxxxxx
Cc: H. Peter Anvin <hpa@xxxxxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: jgross@xxxxxxxx
Cc: konrad.wilk@xxxxxxxxxx
Cc: linux-mm <linux-mm@xxxxxxxxx>
Cc: linux-nvdimm@xxxxxxxxxxxx
Cc: Luis R. Rodriguez <mcgrof@xxxxxxxx>
Cc: stefan.bader@xxxxxxxxxxxxx
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Toshi Kani <toshi.kani@xxxxxx>
Cc: x86-ml <x86@xxxxxxxxxx>
Cc: yigal@xxxxxxxxxxxxx

diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
index cdcff7f7f694..ca6c228d5e62 100644
--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -6,7 +6,7 @@

bool pat_enabled(void);
extern void pat_init(void);
-void pat_init_cache_modes(void);
+void pat_init_cache_modes(u64);

extern int reserve_memtype(u64 start, u64 end,
enum page_cache_mode req_pcm, enum page_cache_mode *ret_pcm);
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 1d553186c434..8533b46e6bee 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -40,7 +40,7 @@
*/
uint16_t __cachemode2pte_tbl[_PAGE_CACHE_MODE_NUM] = {
[_PAGE_CACHE_MODE_WB ] = 0 | 0 ,
- [_PAGE_CACHE_MODE_WC ] = _PAGE_PWT | 0 ,
+ [_PAGE_CACHE_MODE_WC ] = 0 | _PAGE_PCD,
[_PAGE_CACHE_MODE_UC_MINUS] = 0 | _PAGE_PCD,
[_PAGE_CACHE_MODE_UC ] = _PAGE_PWT | _PAGE_PCD,
[_PAGE_CACHE_MODE_WT ] = 0 | _PAGE_PCD,
@@ -50,11 +50,11 @@ EXPORT_SYMBOL(__cachemode2pte_tbl);

uint8_t __pte2cachemode_tbl[8] = {
[__pte2cm_idx( 0 | 0 | 0 )] = _PAGE_CACHE_MODE_WB,
- [__pte2cm_idx(_PAGE_PWT | 0 | 0 )] = _PAGE_CACHE_MODE_WC,
+ [__pte2cm_idx(_PAGE_PWT | 0 | 0 )] = _PAGE_CACHE_MODE_UC_MINUS,
[__pte2cm_idx( 0 | _PAGE_PCD | 0 )] = _PAGE_CACHE_MODE_UC_MINUS,
[__pte2cm_idx(_PAGE_PWT | _PAGE_PCD | 0 )] = _PAGE_CACHE_MODE_UC,
[__pte2cm_idx( 0 | 0 | _PAGE_PAT)] = _PAGE_CACHE_MODE_WB,
- [__pte2cm_idx(_PAGE_PWT | 0 | _PAGE_PAT)] = _PAGE_CACHE_MODE_WC,
+ [__pte2cm_idx(_PAGE_PWT | 0 | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC_MINUS,
[__pte2cm_idx(0 | _PAGE_PCD | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC_MINUS,
[__pte2cm_idx(_PAGE_PWT | _PAGE_PCD | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC,
};
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 476d0780560f..6dc7826e4797 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -68,8 +68,6 @@ static int __init pat_debug_setup(char *str)
}
__setup("debugpat", pat_debug_setup);

-static u64 __read_mostly boot_pat_state;
-
#ifdef CONFIG_X86_PAT
/*
* X86 PAT uses page flags WC and Uncached together to keep track of
@@ -177,14 +175,12 @@ static enum page_cache_mode pat_get_cache_mode(unsigned pat_val, char *msg)
* configuration.
* Using lower indices is preferred, so we start with highest index.
*/
-void pat_init_cache_modes(void)
+void pat_init_cache_modes(u64 pat)
{
- int i;
enum page_cache_mode cache;
char pat_msg[33];
- u64 pat;
+ int i;

- rdmsrl(MSR_IA32_CR_PAT, pat);
pat_msg[32] = 0;
for (i = 7; i >= 0; i--) {
cache = pat_get_cache_mode((pat >> (i * 8)) & 7,
@@ -198,24 +194,33 @@ void pat_init_cache_modes(void)

static void pat_bsp_init(u64 pat)
{
+ u64 tmp_pat;
+
if (!cpu_has_pat) {
pat_disable("PAT not supported by CPU.");
return;
}

- rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
- if (!boot_pat_state) {
+ if (!pat_enabled())
+ goto done;
+
+ rdmsrl(MSR_IA32_CR_PAT, tmp_pat);
+ if (!tmp_pat) {
pat_disable("PAT MSR is 0, disabled.");
return;
}

wrmsrl(MSR_IA32_CR_PAT, pat);

- pat_init_cache_modes();
+done:
+ pat_init_cache_modes(pat);
}

static void pat_ap_init(u64 pat)
{
+ if (!pat_enabled())
+ return;
+
if (!cpu_has_pat) {
/*
* If this happens we are on a secondary CPU, but switched to
@@ -231,25 +236,45 @@ void pat_init(void)
{
u64 pat;

- if (!pat_enabled())
- return;
-
- /*
- * Set PWT to Write-Combining. All other bits stay the same:
- *
- * PTE encoding used in Linux:
- * PAT
- * |PCD
- * ||PWT
- * |||
- * 000 WB _PAGE_CACHE_WB
- * 001 WC _PAGE_CACHE_WC
- * 010 UC- _PAGE_CACHE_UC_MINUS
- * 011 UC _PAGE_CACHE_UC
- * PAT bit unused
- */
- pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
- PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC);
+ if (!pat_enabled()) {
+ /*
+ * No PAT. Emulate the PAT table that corresponds to the two
+ * cache bits, PWT (Write Through) and PCD (Cache Disable). This
+ * setup is the same as the BIOS default setup when the system
+ * has PAT but the "nopat" boot option has been specified. This
+ * emulated PAT table is used when MSR_IA32_CR_PAT returns 0.
+ *
+ * PTE encoding used:
+ *
+ * PCD
+ * |PWT PAT
+ * || slot
+ * 00 0 WB : _PAGE_CACHE_MODE_WB
+ * 01 1 WT : _PAGE_CACHE_MODE_WT
+ * 10 2 UC-: _PAGE_CACHE_MODE_UC_MINUS
+ * 11 3 UC : _PAGE_CACHE_MODE_UC
+ *
+ * NOTE: When WC or WP is used, it is redirected to UC- per
+ * the default setup in __cachemode2pte_tbl[].
+ */
+ pat = PAT(0, WB) | PAT(1, WT) | PAT(2, UC_MINUS) | PAT(3, UC) |
+ PAT(4, WB) | PAT(5, WT) | PAT(6, UC_MINUS) | PAT(7, UC);
+ } else {
+ /*
+ * PTE encoding used in Linux:
+ * PAT
+ * |PCD
+ * ||PWT
+ * |||
+ * 000 WB _PAGE_CACHE_WB
+ * 001 WC _PAGE_CACHE_WC
+ * 010 UC- _PAGE_CACHE_UC_MINUS
+ * 011 UC _PAGE_CACHE_UC
+ * PAT bit unused
+ */
+ pat = PAT(0, WB) | PAT(1, WC) | PAT(2, UC_MINUS) | PAT(3, UC) |
+ PAT(4, WB) | PAT(5, WC) | PAT(6, UC_MINUS) | PAT(7, UC);
+ }

if (!boot_cpu_done) {
pat_bsp_init(pat);
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 46957ead3060..53233a9beea9 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1467,6 +1467,7 @@ asmlinkage __visible void __init xen_start_kernel(void)
{
struct physdev_set_iopl set_iopl;
unsigned long initrd_start = 0;
+ u64 pat;
int rc;

if (!xen_start_info)
@@ -1574,8 +1575,8 @@ asmlinkage __visible void __init xen_start_kernel(void)
* Modify the cache mode translation tables to match Xen's PAT
* configuration.
*/
-
- pat_init_cache_modes();
+ rdmsrl(MSR_IA32_CR_PAT, pat);
+ pat_init_cache_modes(pat);

/* keep using Xen gdt for now; no urgent need to change it */




--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/