[PATCH v2 3/6] dt-bindings: brcmstb-gpio: document properties for wakeup

[Gregory Fong]

Some brcmstb GPIO controllers can be used to wake from suspend, so use the
de facto standard property 'wakeup-source' to mark the nodes of controllers
with that capability.

Also document interrupts-extended, which will be used for wakeup handling
because the interrupt parent for the wake IRQ is different from the regular
IRQ.

Signed-off-by: Gregory Fong <gregory.0xf0@xxxxxxxxx>
---
New in v2.

 .../devicetree/bindings/gpio/brcm,brcmstb-gpio.txt | 26 +++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
index 435f1bc..568814f 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
@@ -33,6 +33,12 @@ Optional properties:
 - interrupt-parent:
     phandle of the parent interrupt controller
 
+- interrupts-extended:
+    Alternate form of specifying interrupts and parents that allows for
+    multiple parents.  This takes precedence over 'interrupts' and
+    'interrupt-parent'.  This probably must be used if the wakeup-source
+    property is provided because that may have a different interrupt parent.
+
 - #interrupt-cells:
     Should be <2>.  The first cell is the GPIO number, the second should specify
     flags.  The following subset of flags is supported:
@@ -48,7 +54,10 @@ Optional properties:
     Marks the device node as an interrupt controller
 
 - interrupt-names:
-    The name of the IRQ resource used by this controller
+    The names of the IRQ resources used by this controller
+
+- wakeup-source:
+    GPIOs for this controller can be used as a wakeup source
 
 Example:
 	upg_gio: gpio@f040a700 {
@@ -63,3 +72,18 @@ Example:
 		interrupt-names = "upg_gio";
 		brcm,gpio-bank-widths = <0x20 0x20 0x20 0x18>;
 	};
+
+	upg_gio_aon: gpio@f04172c0 {
+		#gpio-cells = <0x2>;
+		#interrupt-cells = <0x2>;
+		compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+		gpio-controller;
+		interrupt-controller;
+		reg = <0xf04172c0 0x40>;
+		interrupt-parent = <0xc>;
+		interrupts = <0x6>;
+		interrupts-extended = <0xc 0x6 0xa 0x5>;
+		interrupt-names = "upg_gio_aon", "upg_gio_aon_wakeup";
+		wakeup-source;
+		brcm,gpio-bank-widths = <0x12 0x4>;
+	};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/