Re: [PATCH 1/2] rtc: mxc: add a second clock

From: Alexandre Belloni
Date: Thu May 28 2015 - 07:57:44 EST


Hi,

On 16/05/2015 at 00:35:29 +0200, Philippe Reynes wrote :
> The mxc RTC needs two clocks, one for the input
> reference, and one for the IP. But this driver
> was only using one clock (for the reference).
> This patch add the second clock (for the IP).
>
> Signed-off-by: Philippe Reynes <tremyfr@xxxxxxxxx>
> ---
> arch/arm/mach-imx/clk-imx31.c | 3 ++-
> drivers/rtc/rtc-mxc.c | 26 +++++++++++++++++---------
> 2 files changed, 19 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
> index 286ef42..480c54f 100644
> --- a/arch/arm/mach-imx/clk-imx31.c
> +++ b/arch/arm/mach-imx/clk-imx31.c
> @@ -130,7 +130,8 @@ int __init mx31_clocks_init(unsigned long fref)
> clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
> clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
> clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
> - clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc");
> + clk_register_clkdev(clk[ckil], "rtc", "imx21-rtc");
> + clk_register_clkdev(clk[rtc_gate], "ipg", "imx21-rtc");
> clk_register_clkdev(clk[epit1_gate], "epit", NULL);
> clk_register_clkdev(clk[epit2_gate], "epit", NULL);
> clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0");

This should probably go in a separate patch so that Shawn can apply it.


> diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
> index 09d422b..e916a91 100644
> --- a/drivers/rtc/rtc-mxc.c
> +++ b/drivers/rtc/rtc-mxc.c
> @@ -79,7 +79,8 @@ struct rtc_plat_data {
> struct rtc_device *rtc;
> void __iomem *ioaddr;
> int irq;
> - struct clk *clk;
> + struct clk *clk_rtc;
> + struct clk *clk_ipg;
> struct rtc_time g_rtc_alarm;
> enum imx_rtc_type devtype;
> };
> @@ -373,17 +374,24 @@ static int mxc_rtc_probe(struct platform_device *pdev)
> if (IS_ERR(pdata->ioaddr))
> return PTR_ERR(pdata->ioaddr);
>
> - pdata->clk = devm_clk_get(&pdev->dev, NULL);
> - if (IS_ERR(pdata->clk)) {
> - dev_err(&pdev->dev, "unable to get clock!\n");
> - return PTR_ERR(pdata->clk);
> + pdata->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
> + if (IS_ERR(pdata->clk_ipg)) {
> + dev_err(&pdev->dev, "unable to get ipg clock!\n");
> + return PTR_ERR(pdata->clk_ipg);
> }
>
> - ret = clk_prepare_enable(pdata->clk);
> + ret = clk_prepare_enable(pdata->clk_ipg);
> if (ret)
> return ret;
>
> - rate = clk_get_rate(pdata->clk);
> + pdata->clk_rtc = devm_clk_get(&pdev->dev, "rtc");
> + if (IS_ERR(pdata->clk_rtc)) {
> + dev_err(&pdev->dev, "unable to get rtc clock!\n");
> + ret = PTR_ERR(pdata->clk_rtc);
> + goto exit_put_clk;
> + }
> +
> + rate = clk_get_rate(pdata->clk_rtc);

You are getting the rate but don't you need to clk_prepare_enable()?

Also, aren't those devm_clk_get now failing on i.mx35? Maybe it was
already failing before that patch as I don't see any rtc clock being
registeres in clk-imx35.c

>
> if (rate == 32768)
> reg = RTC_INPUT_CLK_32768HZ;
> @@ -432,7 +440,7 @@ static int mxc_rtc_probe(struct platform_device *pdev)
> return 0;
>
> exit_put_clk:
> - clk_disable_unprepare(pdata->clk);
> + clk_disable_unprepare(pdata->clk_ipg);
>
> return ret;
> }
> @@ -441,7 +449,7 @@ static int mxc_rtc_remove(struct platform_device *pdev)
> {
> struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
>
> - clk_disable_unprepare(pdata->clk);
> + clk_disable_unprepare(pdata->clk_ipg);
>
> return 0;
> }
> --
> 1.7.4.4
>

--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/