Re: [RESEND][PATCH] Bluetooth: Make request workqueue freezable

From: Laura Abbott
Date: Mon May 11 2015 - 21:46:55 EST


On 05/11/2015 06:07 PM, Marcel Holtmann wrote:
Hi Laura,

We've received a number of reports of warnings when coming
out of suspend with certain bluetooth firmware configurations:

WARNING: CPU: 3 PID: 3280 at drivers/base/firmware_class.c:1126
_request_firmware+0x558/0x810()
Modules linked in: ccm ip6t_rpfilter ip6t_REJECT nf_reject_ipv6
xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter
ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6
ip6table_mangle ip6table_security ip6table_raw ip6table_filter
ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4
nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw
binfmt_misc bnep intel_rapl iosf_mbi arc4 x86_pkg_temp_thermal
snd_hda_codec_hdmi coretemp kvm_intel joydev snd_hda_codec_realtek
iwldvm snd_hda_codec_generic kvm iTCO_wdt mac80211 iTCO_vendor_support
snd_hda_intel snd_hda_controller snd_hda_codec crct10dif_pclmul
snd_hwdep crc32_pclmul snd_seq crc32c_intel ghash_clmulni_intel uvcvideo
snd_seq_device iwlwifi btusb videobuf2_vmalloc snd_pcm videobuf2_core
serio_raw bluetooth cfg80211 videobuf2_memops sdhci_pci v4l2_common
videodev thinkpad_acpi sdhci i2c_i801 lpc_ich mfd_core wacom mmc_core
media snd_timer tpm_tis hid_logitech_hidpp wmi tpm rfkill snd mei_me mei
shpchp soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc i915
i2c_algo_bit drm_kms_helper e1000e drm hid_logitech_dj ptp pps_core
video
CPU: 3 PID: 3280 Comm: kworker/u17:0 Not tainted 3.19.3-200.fc21.x86_64
Hardware name: LENOVO 343522U/343522U, BIOS GCET96WW (2.56 ) 10/22/2013
Workqueue: hci0 hci_power_on [bluetooth]
0000000000000000 0000000089944328 ffff88040acffb78 ffffffff8176e215
0000000000000000 0000000000000000 ffff88040acffbb8 ffffffff8109bc1a
0000000000000000 ffff88040acffcd0 00000000fffffff5 ffff8804076bac40
Call Trace:
[<ffffffff8176e215>] dump_stack+0x45/0x57
[<ffffffff8109bc1a>] warn_slowpath_common+0x8a/0xc0
[<ffffffff8109bd4a>] warn_slowpath_null+0x1a/0x20
[<ffffffff814dbe78>] _request_firmware+0x558/0x810
[<ffffffff814dc165>] request_firmware+0x35/0x50
[<ffffffffa03a7886>] btusb_setup_bcm_patchram+0x86/0x590 [btusb]
[<ffffffff814d40e6>] ? rpm_idle+0xd6/0x230
[<ffffffffa04d4801>] hci_dev_do_open+0xe1/0xa90 [bluetooth]
[<ffffffff810c51dd>] ? ttwu_do_activate.constprop.90+0x5d/0x70
[<ffffffffa04d5980>] hci_power_on+0x40/0x200 [bluetooth]
[<ffffffff810b487c>] process_one_work+0x14c/0x3f0
[<ffffffff810b52f3>] worker_thread+0x53/0x470
[<ffffffff810b52a0>] ? rescuer_thread+0x300/0x300
[<ffffffff810ba548>] kthread+0xd8/0xf0
[<ffffffff810ba470>] ? kthread_create_on_node+0x1b0/0x1b0
[<ffffffff81774958>] ret_from_fork+0x58/0x90
[<ffffffff810ba470>] ? kthread_create_on_node+0x1b0/0x1b0

This occurs after every resume.

When resuming, the bluetooth stack calls hci_register_dev,
allocates a new workqueue, and immediately schedules the
power_on on the newly created workqueue. Since the new
workqueue is not freezable, the work runs immediately and
triggers the warning since resume is still happening and
usermodehelper has not yet been re-enabled. Fix this by
making the request workqueue freezable. This ensures
the work will not run until unfreezing occurs and usermodehelper
is re-enabled.

Signed-off-by: Laura Abbott <labbott@xxxxxxxxxxxxxxxxx>
---
Resend because I think this got lost in the thread.
This should be fixing the actual root cause of the warnings.

so I am not convinced that it actually fixes the root cause. This is just papering over it.

The problem is pretty clear, the firmware for some of the Bluetooth controllers is optional and that means during the original hotplug event it will not be found and the controller keeps operating. However for some reason instead of actually suspending and resuming the Bluetooth controller, we see a unplug + replug (since we are going through probe) and that is causing this funny behaviour.


Fundamentally the issue is the request_firmware is being called at the
wrong time. From Documentation/workqueue.txt:

WQ_FREEZABLE

A freezable wq participates in the freeze phase of the system
suspend operations. Work items on the wq are drained and no
new work item starts execution until thawed.


By making the request workqueue freezable, any work that gets scheduled
will not run until the time for tasks to unthaw.
4320f6b1d9db4ca912c5eb6ecb328b2e090e1586
("PM / sleep: Fix request_firmware() error at resume") fixed the resume
path such that before all tasks are unthawed, calls to
usermodehelper_read_trylock will block until usermodehelper is fully
resumed. This means that any task which is frozen and then woken up
again should have the right sequencing for usermodehelper. The workqueue
which handled the bluetooth power on was never being frozen properly so
there was never any guarantee of when it would run. This patch gives
it the necessary sequence.

So how does making one of the core workqueues freezable fixes this the right way. I do not even know how many other side effects that might have. That hdev->req_workqueue is a Bluetooth core internal workqueue that we are using for multiple tasks.

Rather tell me on why we are probing the USB devices that might need firmware without having userspace ready. It sounds to me that the USB driver probe callback should be delayed if we can not guarantee that it can request firmware. As I explained many times, the call path that causes this is going through probe callback of the driver itself.


I agree that if the driver probe function was requesting firmware
directly there would be a problem. The power_on function is already
being called asynchronously on a workqueue. Making that workqueue freezable does exactly the delay you describe.

The side effects should be limited to the change in behavior of
draining all work items at freeze time and then not running
again until task thaw. Do you know of any limitations where
draining the workqueue at freeze time could not happen or would
block indefinitely?

Regards

Marcel


Thanks,
Laura

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/