Re: [PATCH] ARM: alignment: Use is_wide_instruction() to check wide instruction

[Yingjoe Chen]

On Fri, 2015-04-10 at 22:05 +0800, Yingjoe Chen wrote:
> I first notice the comment is incorrect, then I realize there's another
> macro which do exactly the same thing.
> Tested with hand written userspace program with a few wide instructions
> to make sure this still work as expect.
> 
> 8<-------------------------------------------------
> do_alignment() is using locally added IS_T32() macro to check if an
> instruction is a Thumb-2 32 bit instruction. The macro
> is_wide_instruction() is doing the same thing, with slightly faster
> implementation.
> Change to use is_wide_instruction() in do_alignment() and remove
> IS_T32().
> 


Hi Russell,

Any suggestion about this patch?
Should I put this into your patch system?

Joe.C


> Signed-off-by: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
> ---
>  arch/arm/mm/alignment.c | 6 +-----
>  1 file changed, 1 insertion(+), 5 deletions(-)
> 
> diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
> index 2c0c541..f8e82f5 100644
> --- a/arch/arm/mm/alignment.c
> +++ b/arch/arm/mm/alignment.c
> @@ -71,10 +71,6 @@
>  
>  #define BAD_INSTR 	0xdeadc0de
>  
> -/* Thumb-2 32 bit format per ARMv7 DDI0406A A6.3, either f800h,e800h,f800h */
> -#define IS_T32(hi16) \
> -	(((hi16) & 0xe000) == 0xe000 && ((hi16) & 0x1800))
> -
>  static unsigned long ai_user;
>  static unsigned long ai_sys;
>  static void *ai_sys_last_pc;
> @@ -770,7 +766,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
>  		tinstr = __mem_to_opcode_thumb16(tinstr);
>  		if (!fault) {
>  			if (cpu_architecture() >= CPU_ARCH_ARMv7 &&
> -			    IS_T32(tinstr)) {
> +			    is_wide_instruction(tinstr)) {
>  				/* Thumb-2 32-bit */
>  				u16 tinst2 = 0;
>  				fault = probe_kernel_address(ptr + 1, tinst2);


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/