Re: [PATCH] arm64/perf: add ACPI support

From: Will Deacon
Date: Wed May 06 2015 - 08:46:52 EST


Hi Mark,

On Fri, May 01, 2015 at 03:45:48PM +0100, Mark Salter wrote:
> When using ACPI, the perf_event irq info needs to be parsed
> from the MADT and a corresponding platform device needs to
> be created and registered. The only change to the existing
> driver is a check to avoid unnecessary devicetree parsing.
>
> Signed-off-by: Mark Salter <msalter@xxxxxxxxxx>
> ---
> arch/arm64/kernel/perf_event.c | 106 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 106 insertions(+)
>
> diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
> index 195991d..1e53b26 100644
> --- a/arch/arm64/kernel/perf_event.c
> +++ b/arch/arm64/kernel/perf_event.c
> @@ -31,6 +31,7 @@
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> #include <linux/uaccess.h>
> +#include <linux/acpi.h>
>
> #include <asm/cputype.h>
> #include <asm/irq.h>
> @@ -1315,6 +1316,10 @@ static int armpmu_device_probe(struct platform_device *pdev)
> if (!cpu_pmu)
> return -ENODEV;
>
> + /* skip the devicetree parsing if we're using ACPI */
> + if (!acpi_disabled)
> + goto done;

Can we invert the logic here and move the DT parsing into a new function,
please? That way it's clearer to read the ACPI and DT paths, I think.

> +
> irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
> if (!irqs)
> return -ENOMEM;
> @@ -1350,6 +1355,7 @@ static int armpmu_device_probe(struct platform_device *pdev)
> else
> kfree(irqs);
>
> +done:
> cpu_pmu->plat_device = pdev;
> return 0;
> }
> @@ -1368,6 +1374,106 @@ static int __init register_pmu_driver(void)
> }
> device_initcall(register_pmu_driver);
>
> +#ifdef CONFIG_ACPI
> +struct acpi_pmu_irq {
> + int gsi;
> + int trigger;
> +};
> +
> +static struct acpi_pmu_irq acpi_pmu_irqs[NR_CPUS] __initdata;

Does this have to be allocated statically?

> +static int __init
> +acpi_parse_pmu_irqs(struct acpi_subtable_header *header,
> + const unsigned long end)
> +{
> + struct acpi_madt_generic_interrupt *gic;
> + int cpu;
> + u64 mpidr;
> +
> + gic = (struct acpi_madt_generic_interrupt *)header;
> + if (BAD_MADT_ENTRY(gic, end))
> + return -EINVAL;
> +
> + mpidr = gic->arm_mpidr & MPIDR_HWID_BITMASK;
> +
> + for_each_possible_cpu(cpu) {
> + if (cpu_logical_map(cpu) != mpidr)
> + continue;
> +
> + acpi_pmu_irqs[cpu].gsi = gic->performance_interrupt;
> + if (gic->flags & ACPI_MADT_PERFORMANCE_IRQ_MODE)
> + acpi_pmu_irqs[cpu].trigger = ACPI_EDGE_SENSITIVE;
> + else
> + acpi_pmu_irqs[cpu].trigger = ACPI_LEVEL_SENSITIVE;
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int __init pmu_acpi_init(void)
> +{
> + struct platform_device *pdev;
> + struct acpi_pmu_irq *pirq = acpi_pmu_irqs;
> + struct resource *res, *r;
> + int err = -ENOMEM;
> + int i, count, irq;
> +
> + if (acpi_disabled)
> + return 0;
> +
> + count = acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_INTERRUPT,
> + acpi_parse_pmu_irqs, num_possible_cpus());

Now we have three places parsing the MADT:

- The SMP boot code
- The GIC code
- The PMU code

The first is called from acpi_init_cpus via setup.c, the second is called
from acpi_irq_init via irqchip.c and for the third you're proposing an
initcall...

Given that the acpi_gic_init() invocation from acpi_irq_init has a comment
making it sound like something better is coming along, is there a chance
that we could tidy up the MADT parsing so that it's at least called from
some common place?


> + /* Must have irq for boot boot cpu, at least */
> + if (count <= 0 || pirq->gsi == 0)
> + return -EINVAL;
> +
> + irq = acpi_register_gsi(NULL, pirq->gsi, pirq->trigger,
> + ACPI_ACTIVE_HIGH);

Some platforms (unfortunately, this is more common than I'd like) OR all
of the per-cpu SPIs together and we have to play games to get that working.
I can imagine that being described in ACPI by having the same interrupt
number for each core but that interrupt *not* being percpu (i.e. not a PPI).

I don't particularly care for supporting this configuration, but we should
explicitly reject this case and fail the probe.

> + if (irq_is_percpu(irq))
> + count = 1;

Should we sanity check that all cores have the same interrupt number?

> +
> + pdev = platform_device_alloc("arm-pmu", -1);
> + if (!pdev)
> + goto err_free_gsi;

Won't we end up unregistering too many GSIs in this error case?

> +
> + res = kcalloc(count, sizeof(*res), GFP_KERNEL);
> + if (!res)
> + goto err_free_device;

Likewise.

> +
> + for (i = 0, r = res; i < count; i++, pirq++, r++) {
> + if (i)
> + irq = acpi_register_gsi(NULL, pirq->gsi, pirq->trigger,
> + ACPI_ACTIVE_HIGH);

Is there no polarity field, like we have in the GTDT for the architected
timer?

Will
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/