Re: [PATCH RFC v1 4/5] clk: core: add CLK_SET_PARENT_ON flags to support clocks require parent on

From: Dong Aisheng
Date: Mon May 04 2015 - 06:49:19 EST


On Thu, Apr 30, 2015 at 06:09:38PM -0700, Stephen Boyd wrote:
> On 04/15, Dong Aisheng wrote:
> > diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> > index 7af553d..f2470e5 100644
> > --- a/drivers/clk/clk.c
> > +++ b/drivers/clk/clk.c
> > @@ -43,6 +43,11 @@ static int clk_core_get_phase(struct clk_core *clk);
> > static bool clk_core_is_prepared(struct clk_core *clk);
> > static bool clk_core_is_enabled(struct clk_core *clk);
> > static struct clk_core *clk_core_lookup(const char *name);
> > +static struct clk *clk_core_get_parent(struct clk_core *clk);
> > +static int clk_core_prepare(struct clk_core *clk);
> > +static void clk_core_unprepare(struct clk_core *clk);
> > +static int clk_core_enable(struct clk_core *clk);
> > +static void clk_core_disable(struct clk_core *clk);
>
> Let's avoid adding more here if we can.
>

Yes, also don't want to add these pre-declarations, but needed by the following
changes...

> >
> > /*** private data structures ***/
> >
> > @@ -508,6 +513,7 @@ static void clk_unprepare_unused_subtree(struct clk_core *clk)
> > static void clk_disable_unused_subtree(struct clk_core *clk)
> > {
> > struct clk_core *child;
> > + struct clk *parent = clk_core_get_parent(clk);
> > unsigned long flags;
> >
> > lockdep_assert_held(&prepare_lock);
> > @@ -515,6 +521,13 @@ static void clk_disable_unused_subtree(struct clk_core *clk)
> > hlist_for_each_entry(child, &clk->children, child_node)
> > clk_disable_unused_subtree(child);
> >
> > + if (clk->flags & CLK_SET_PARENT_ON && parent) {
> > + clk_core_prepare(parent->core);
> > + flags = clk_enable_lock();
> > + clk_core_enable(parent->core);
> > + clk_enable_unlock(flags);
> > + }
>
> If there's a parent and this clock is on, why wouldn't the parent
> also be on? It doesn't seem right to have a clock that's on
> without it's parent on that we're trying to turn off. Put another
> way, how is this fixing anything?
>

Well, this is caused by a state mis-align between HW and SW in clock tree
during booting.
Usually in uboot, we may enable all clocks in HW by default.
And during kernel booting time, the parent clock could be disabled in its driver
probe due to calling clk_prepare_enable and clk_disable_unprepare.
Because it's child clock is only enabled in HW while its SW usecount in
clock tree is still 0, so clk_disable of parent clock will gate the parent clock
in both HW and SW usecount ultimately.
Then there will be a clock is on in HW while its parent is disabled.

Later when clock core does clk_disable_unused, this clock disable
will cause system hang due to the limitation of operation requiring its parent
clock on.

> > +
> > flags = clk_enable_lock();
> >
> > if (clk->enable_count)
> > @@ -608,6 +627,14 @@ struct clk *__clk_get_parent(struct clk *clk)
> > }
> > EXPORT_SYMBOL_GPL(__clk_get_parent);
> >
> > +static struct clk *clk_core_get_parent(struct clk_core *clk)
> > +{
> > + if (!clk)
> > + return NULL;
> > +
> > + return !clk->parent ? NULL : clk->parent->hw->clk;
> > +}
>
> s/clk/core/ in this function
>

Got it as you told we will change all clk name to core for clk_core.

> > +
> > static struct clk_core *clk_core_get_parent_by_index(struct clk_core *clk,
> > u8 index)
> > {
> > @@ -1456,13 +1483,27 @@ static struct clk_core *__clk_set_parent_before(struct clk_core *clk,
> > * hardware and software states.
> > *
> > * See also: Comment for clk_set_parent() below.
> > + *
> > + * 2. enable two parents clock for .set_parent() operation if finding
> > + * flag CLK_SET_PARENT_ON
> > */
> > - if (clk->prepare_count) {
> > + if (clk->prepare_count || clk->flags & CLK_SET_PARENT_ON) {
> > clk_core_prepare(parent);
> > flags = clk_enable_lock();
> > clk_core_enable(parent);
> > - clk_core_enable(clk);
> > clk_enable_unlock(flags);
> > +
> > + if (clk->prepare_count) {
> > + flags = clk_enable_lock();
> > + clk_core_enable(clk);
> > + clk_enable_unlock(flags);
> > + } else {
> > +
> > + clk_core_prepare(old_parent);
> > + flags = clk_enable_lock();
> > + clk_core_enable(old_parent);
> > + clk_enable_unlock(flags);
> > + }
> > }
> >
> > /* update the clk tree topology */
> > @@ -1483,12 +1524,22 @@ static void __clk_set_parent_after(struct clk_core *clk,
> > * Finish the migration of prepare state and undo the changes done
> > * for preventing a race with clk_enable().
> > */
> > - if (clk->prepare_count) {
> > + if (clk->prepare_count || clk->flags & CLK_SET_PARENT_ON) {
> > flags = clk_enable_lock();
> > - clk_core_disable(clk);
> > clk_core_disable(old_parent);
> > clk_enable_unlock(flags);
> > clk_core_unprepare(old_parent);
> > +
> > + if (clk->prepare_count) {
> > + flags = clk_enable_lock();
> > + clk_core_disable(clk);
> > + clk_enable_unlock(flags);
> > + } else {
> > + flags = clk_enable_lock();
> > + clk_core_disable(parent);
> > + clk_enable_unlock(flags);
> > + clk_core_unprepare(parent);
> > + }
>
> Is there a reason why the clk itself can't be on when we switch
> parents?

The CLK_SET_PARENT_ON only indicates that it's parent clocks should
be on, not itself clock.
And we don't want to break CLK_SET_PARENT_GATE clocks.
So if the clk is not prepared before, we only enable its old parent,
not including itself.

> It seems that if the clk was on during the parent
> switch, then it should be possible to just add a flag check on
> both these if conditions and be done. It may be possible to
> change the behavior here and not enable the clk in hardware, just
> up the count and turn on both the parents. I'm trying to recall
> why we enable the clk itself across the switch.
>

Seems it's needed by this fix:
commit f8aa0b clk: Fix race condition between clk_set_parent and clk_enable()

> > }
> > }
> >
> > @@ -1514,12 +1565,23 @@ static int __clk_set_parent(struct clk_core *clk, struct clk_core *parent,
> > clk_reparent(clk, old_parent);
> > clk_enable_unlock(flags);
> >
> > - if (clk->prepare_count) {
> > + if (clk->prepare_count || clk->flags & CLK_SET_PARENT_ON) {
> > flags = clk_enable_lock();
> > - clk_core_disable(clk);
> > clk_core_disable(parent);
> > clk_enable_unlock(flags);
> > clk_core_unprepare(parent);
> > +
> > + if (clk->prepare_count) {
> > + flags = clk_enable_lock();
> > + clk_core_disable(clk);
> > + clk_enable_unlock(flags);
> > + } else {
> > + flags = clk_enable_lock();
> > + clk_core_disable(old_parent);
> > + clk_enable_unlock(flags);
> > + clk_core_unprepare(old_parent);
> > + }
> > +
>
> Hmmm... if __clk_set_parent_after() actually used the second
> argument then we could put this duplicate logic in there and call
> it with a different order of arguments in the success vs. error
> paths in this function. Unless I missed something.
>

Good suggestion, will try in next version.

> > }
> > return ret;
> > }
> > @@ -1735,13 +1797,18 @@ static void clk_change_rate(struct clk_core *clk)
> > unsigned long best_parent_rate = 0;
> > bool skip_set_rate = false;
> > struct clk_core *old_parent;
> > + struct clk_core *parent = NULL;
> > + unsigned long flags;
> >
> > old_rate = clk->rate;
> >
> > - if (clk->new_parent)
> > + if (clk->new_parent) {
> > + parent = clk->new_parent;
> > best_parent_rate = clk->new_parent->rate;
> > - else if (clk->parent)
> > + } else if (clk->parent) {
> > + parent = clk->parent;
> > best_parent_rate = clk->parent->rate;
> > + }
> >
> > if (clk->new_parent && clk->new_parent != clk->parent) {
> > old_parent = __clk_set_parent_before(clk, clk->new_parent);
> > @@ -1762,6 +1829,13 @@ static void clk_change_rate(struct clk_core *clk)
> >
> > trace_clk_set_rate(clk, clk->new_rate);
> >
> > + if (clk->flags & CLK_SET_PARENT_ON && parent) {
> > + clk_core_prepare(parent);
> > + flags = clk_enable_lock();
> > + clk_core_enable(parent);
> > + clk_enable_unlock(flags);
> > + }
>
> I can understand the case where clk_set_parent() can't switch the
> mux because it needs the source and destination parents to be
> clocking. I have that hardware design on my desk. But to change
> the rate of a clock? The name of the flag, CLK_SET_PARENT_ON,
> leads me to believe we don't really need to do this if we're
> changing the rate, unless we're also switching the parents. Care
> to explain why the hardware requires this?
>

What i know is that it's designed for eliminate glitch internally.
Will find more information for you.

> If we actually do need to keep the parent clock on when the rate
> is switching the name of the flag could be better and not have
> "set parent" in the name.
>

Actually it's meaning is the clock set(e.g. rate, gate/ungate)
needs its parent clocks on, not set parent...
But Yes, i fully agree the naming is a bit misleading.

It just follows the exist CLK_SET_X convention..
Seems not easy find a better name.
What's your suggestion?

How about CLK_OPS_PARENT_ON?

> > +
> > if (!skip_set_rate && clk->ops->set_rate)
> > clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
> >
> > @@ -1769,6 +1843,13 @@ static void clk_change_rate(struct clk_core *clk)
> >
> > clk->rate = clk_recalc(clk, best_parent_rate);
> >
> > + if (clk->flags & CLK_SET_PARENT_ON && parent) {
> > + flags = clk_enable_lock();
> > + clk_core_disable(parent);
> > + clk_enable_unlock(flags);
> > + clk_core_unprepare(parent);
> > + }
>
> Why not just call clk_prepare_enable()?

Caused by two reasons initially:
1) no one uses clk_prepare_enable in clk core, so i guess it may be better
not use it :-)
2) clk_prepare_enable includes one more unneeded prepare lock acquire,
lines exchange efficiency.

> Or add a clk_core
> specific function, clk_core_prepare_enable() that we can call
> here. We could put the parent pointer check in there too so that
> it's just
>
> if (clk->flags & CLK_SET_PARENT_ON)
> clk_core_prepare_enable(parent);

I'm ok if you like this. :)

Regards
Dong Aisheng

>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/