Re: [PATCH v2.1] ftracetest: Do not use usleep directly

[Masami Hiramatsu]

(2015/04/02 13:34), Namhyung Kim wrote:
> The usleep is only provided on distros from Redhat so running ftracetest
> on other distro resulted in failures due to the missing usleep.
> 
> The reason of using [u]sleep in the test was to generate (scheduler)
> events.  It can be done various ways like this:
> 
> yield() {  ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1; }

Nice hack! :)

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@xxxxxxxxxxx>

> 
> Reported-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
> Reported-by: Dave Jones <davej@xxxxxxxxxxxxxxxxx>
> Reported-by: Luis Henriques <luis.henriques@xxxxxxxxxxxxx>
> Based-on-patch-by: PÃdraig Brady <P@xxxxxxxxxxxxxx>
> CC: Masami Hiramatsu <masami.hiramatsu.pt@xxxxxxxxxxx>
> Signed-off-by: Namhyung Kim <namhyung@xxxxxxxxxx>
> ---
> fix a typo of pinc
> 
>  tools/testing/selftests/ftrace/test.d/event/event-enable.tc | 13 ++++++++++---
>  .../selftests/ftrace/test.d/event/subsystem-enable.tc       | 13 ++++++++++---
>  .../selftests/ftrace/test.d/event/toplevel-enable.tc        | 13 +++++++++++++
>  3 files changed, 33 insertions(+), 6 deletions(-)
> 
> diff --git a/tools/testing/selftests/ftrace/test.d/event/event-enable.tc b/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
> index 668616d9bb03..c40c139aaf2b 100644
> --- a/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
> +++ b/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
> @@ -12,6 +12,10 @@ fail() { #msg
>      exit -1
>  }
>  
> +yield() {
> +    ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
> +}
> +
>  if [ ! -f set_event -o ! -d events/sched ]; then
>      echo "event tracing is not supported"
>      exit_unsupported
> @@ -21,7 +25,8 @@ reset_tracer
>  do_reset
>  
>  echo 'sched:sched_switch' > set_event
> -usleep 1
> +
> +yield
>  
>  count=`cat trace | grep sched_switch | wc -l`
>  if [ $count -eq 0 ]; then
> @@ -31,7 +36,8 @@ fi
>  do_reset
>  
>  echo 1 > events/sched/sched_switch/enable
> -usleep 1
> +
> +yield
>  
>  count=`cat trace | grep sched_switch | wc -l`
>  if [ $count -eq 0 ]; then
> @@ -41,7 +47,8 @@ fi
>  do_reset
>  
>  echo 0 > events/sched/sched_switch/enable
> -usleep 1
> +
> +yield
>  
>  count=`cat trace | grep sched_switch | wc -l`
>  if [ $count -ne 0 ]; then
> diff --git a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
> index 655c415b6e7f..cbd98b71ee8a 100644
> --- a/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
> +++ b/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
> @@ -12,6 +12,10 @@ fail() { #msg
>      exit -1
>  }
>  
> +yield() {
> +    ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
> +}
> +
>  if [ ! -f set_event -o ! -d events/sched ]; then
>      echo "event tracing is not supported"
>      exit_unsupported
> @@ -21,7 +25,8 @@ reset_tracer
>  do_reset
>  
>  echo 'sched:*' > set_event
> -usleep 1
> +
> +yield
>  
>  count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
>  if [ $count -lt 3 ]; then
> @@ -31,7 +36,8 @@ fi
>  do_reset
>  
>  echo 1 > events/sched/enable
> -usleep 1
> +
> +yield
>  
>  count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
>  if [ $count -lt 3 ]; then
> @@ -41,7 +47,8 @@ fi
>  do_reset
>  
>  echo 0 > events/sched/enable
> -usleep 1
> +
> +yield
>  
>  count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
>  if [ $count -ne 0 ]; then
> diff --git a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
> index 480845774007..65e2ab666611 100644
> --- a/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
> +++ b/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
> @@ -12,6 +12,10 @@ fail() { #msg
>      exit -1
>  }
>  
> +yield() {
> +    ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
> +}
> +
>  if [ ! -f available_events -o ! -f set_event -o ! -d events ]; then
>      echo "event tracing is not supported"
>      exit_unsupported
> @@ -21,6 +25,9 @@ reset_tracer
>  do_reset
>  
>  echo '*:*' > set_event
> +
> +yield
> +
>  count=`cat trace | grep -v ^# | wc -l`
>  if [ $count -eq 0 ]; then
>      fail "none of events are recorded"
> @@ -29,6 +36,9 @@ fi
>  do_reset
>  
>  echo 1 > events/enable
> +
> +yield
> +
>  count=`cat trace | grep -v ^# | wc -l`
>  if [ $count -eq 0 ]; then
>      fail "none of events are recorded"
> @@ -37,6 +47,9 @@ fi
>  do_reset
>  
>  echo 0 > events/enable
> +
> +yield
> +
>  count=`cat trace | grep -v ^# | wc -l`
>  if [ $count -ne 0 ]; then
>      fail "any of events should not be recorded"
> 


-- 
Masami HIRAMATSU
Linux Technology Research Center, System Productivity Research Dept.
Center for Technology Innovation - Systems Engineering
Hitachi, Ltd., Research & Development Group
E-mail: masami.hiramatsu.pt@xxxxxxxxxxx


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/