Re: [PATCH 6/8] ARM: cpuidle: Enable the ARM64 driver for both ARM32/ARM64

From: Paul Bolle
Date: Wed Mar 25 2015 - 16:54:21 EST


A few nits are all I spotted.

On Wed, 2015-03-25 at 10:07 +0100, Daniel Lezcano wrote:
> --- a/drivers/cpuidle/Kconfig.arm
> +++ b/drivers/cpuidle/Kconfig.arm

> +config ARM_CPUIDLE
> + bool "Generic ARM/ARM64 CPU idle Driver"
> + select DT_IDLE_STATES
> + help
> + Select this to enable generic cpuidle driver for ARM.
> + It provides a generic idle driver whose idle states are configured
> + at run-time through DT nodes. The CPUidle suspend backend is
> + initialized by calling the CPU operations init idle hook
> + provided by architecture code.

Start with a tab instead of 8 spaces, please.

> --- /dev/null
> +++ b/drivers/cpuidle/cpuidle-arm.c

> +#include <linux/cpuidle.h>
> +#include <linux/cpumask.h>
> +#include <linux/cpu_pm.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>

Is this include actually needed? I haven't tried building this without
that include, but I spotted nothing obviously module related in this
file.

> +#include <linux/of.h>
> +
> +#include <asm/cpuidle.h>
> +
> +#include "dt_idle_states.h"

> +static struct cpuidle_driver arm_idle_driver = {
> + .name = "arm_idle",
> + .owner = THIS_MODULE,

Since this can only be built in, THIS_MODULE will (basically) be
equivalent to NULL according to include/linux/export.h. So I suppose
this line can be dropped.

> + /*
> + * State at index 0 is standby wfi and considered standard
> + * on all ARM platforms. If in some platforms simple wfi
> + * can't be used as "state 0", DT bindings must be implemented
> + * to work around this issue and allow installing a special
> + * handler for idle state index 0.
> + */
> + .states[0] = {
> + .enter = arm_enter_idle_state,
> + .exit_latency = 1,
> + .target_residency = 1,
> + .power_usage = UINT_MAX,
> + .name = "WFI",
> + .desc = "ARM WFI",
> + }
> +};

I did notice that these two nits are already present in
drivers/cpuidle/cpuidle-arm64.c. But since this patch is not just moving
that file's content around, you might as well look into those two nits.


Paul Bolle

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/