Re: [PATCH 4/4] mm: numa: Slow PTE scan rate if migration failures occur

[Dave Chinner]

On Tue, Mar 17, 2015 at 02:30:57PM -0700, Linus Torvalds wrote:
> On Tue, Mar 17, 2015 at 1:51 PM, Dave Chinner <david@xxxxxxxxxxxxx> wrote:
> >
> > On the -o ag_stride=-1 -o bhash=101073 config, the 60s perf stat I
> > was using during steady state shows:
> >
> >      471,752      migrate:mm_migrate_pages ( +-  7.38% )
> >
> > The migrate pages rate is even higher than in 4.0-rc1 (~360,000)
> > and 3.19 (~55,000), so that looks like even more of a problem than
> > before.
> 
> Hmm. How stable are those numbers boot-to-boot?

I've run the test several times but only profiles once so far.
runtimes were 7m45, 7m50, 7m44s, 8m2s, and the profiles came from
the 8m2s run.

reboot, run again:

$ sudo perf stat -a -r 6 -e migrate:mm_migrate_pages sleep 10

 Performance counter stats for 'system wide' (6 runs):

           572,839      migrate:mm_migrate_pages    ( +-  3.15% )

      10.001664694 seconds time elapsed             ( +-  0.00% )
$

And just to confirm, a minute later, still in phase 3:

	590,974      migrate:mm_migrate_pages       ( +-  2.86% )

Reboot, run again:

	575,344      migrate:mm_migrate_pages       ( +-  0.70% )

So there is boot-to-boot variation, but it doesn't look like it
gets any better....

> That kind of extreme spread makes me suspicious. It's also interesting
> that if the numbers really go up even more (and by that big amount),
> then why does there seem to be almost no correlation with performance
> (which apparently went up since rc1, despite migrate_pages getting
> even _worse_).
> 
> > And the profile looks like:
> >
> > -   43.73%     0.05%  [kernel]            [k] native_flush_tlb_others
> 
> Ok, that's down from rc1 (67%), but still hugely up from 3.19 (13.7%).
> And flush_tlb_page() does seem to be called about ten times more
> (flush_tlb_mm_range used to be 1.4% of the callers, now it's invisible
> at 0.13%)
> 
> Damn. From a performance number standpoint, it looked like we zoomed
> in on the right thing. But now it's migrating even more pages than
> before. Odd.

Throttling problem, like Mel originally suspected?

> > And the vmstats are:
> >
> > 3.19:
> >
> > numa_hit 5163221
> > numa_local 5153127
> 
> > 4.0-rc1:
> >
> > numa_hit 36952043
> > numa_local 36927384
> >
> > 4.0-rc4:
> >
> > numa_hit 23447345
> > numa_local 23438564
> >
> > Page migrations are still up by a factor of ~20 on 3.19.
> 
> The thing is, those "numa_hit" things come from the zone_statistics()
> call in buffered_rmqueue(), which in turn is simple from the memory
> allocator. That has *nothing* to do with virtual memory, and
> everything to do with actual physical memory allocations.  So the load
> is simply allocating a lot more pages, presumably for those stupid
> migration events.
> 
> But then it doesn't correlate with performance anyway..
>
> Can you do a simple stupid test? Apply that commit 53da3bc2ba9e ("mm:
> fix up numa read-only thread grouping logic") to 3.19, so that it uses
> the same "pte_dirty()" logic as 4.0-rc4. That *should* make the 3.19
> and 4.0-rc4 numbers comparable.

patched 3.19 numbers on this test are slightly worse than stock
3.19, but nowhere near as bad as 4.0-rc4:

	241,718      migrate:mm_migrate_pages		( +-  5.17% )

So that pte_write->pte_dirty change makes this go from ~55k to 240k,
and runtime go from 4m54s to 5m20s. vmstats:

numa_hit 9162476
numa_miss 0
numa_foreign 0
numa_interleave 10685
numa_local 9153740
numa_other 8736
numa_pte_updates 49582103
numa_huge_pte_updates 0
numa_hint_faults 48075098
numa_hint_faults_local 12974704
numa_pages_migrated 5748256
pgmigrate_success 5748256
pgmigrate_fail 0

Cheers,

Dave.
-- 
Dave Chinner
david@xxxxxxxxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/