Re: [PATCH RESEND] usb: dwc2: avoid leaking DMA channels on disconnection

From: Yunzhi Li
Date: Mon Mar 16 2015 - 06:05:30 EST


Hi
When the HCD is disconnected, the DMA transfers still in-flight were cleaned-up
but the count of available DMA channels (e.g. available_host_channels) was not
reset.
The pool of DMA channels can be depleted when doing unclean
disconnection of USB peripherals, and reaches the point where no
transfer was possible until the next reboot/reload of the driver.

Tested by putting a programmable USB mux on the port and randomly
plugging/unpluging a USB HUB with USB mass-storage key, USB-audio and
USB-ethernet dongle connected to its downstream ports, and also doing the
disconnection early while the devices are still enumerating to get more URBs
in-flight.
After the patch, the devices are still enumerating after thousands of cycles,
while the port was totally dead before.

Signed-off-by: Vincent Palatin <vpalatin@xxxxxxxxxxxx>
---
I'm re-sending it, it seems the previous email did not show up.

drivers/usb/dwc2/hcd.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index c78c874..559b55e 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -257,6 +257,14 @@ static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg)
*/
channel->qh = NULL;
}
+ /* All channels have been freed, mark them available */
+ if (hsotg->core_params->uframe_sched > 0) {
+ hsotg->available_host_channels =
+ hsotg->core_params->host_channels;
+ } else {
+ hsotg->non_periodic_channels = 0;
+ hsotg->periodic_channels = 0;
+ }
}
/**

I have reviewed this patch. Obviously,it makes sense.

Reviewed-by: Yunzhi Li <lyz@xxxxxxxxxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/