Re: [PATCH v5 0/5] Add support for Fujitsu USB host controller

[Felipe Balbi]

On Sun, Feb 22, 2015 at 12:25:35PM +0800, Sneeker Yeh wrote:
> These patches add support for XHCI compliant Host controller found
> on Fujitsu Socs, and are based on http://lwn.net/Articles/629162/
> The first patch is to add Fujitsu glue layer of Synopsis DesignWare USB3 driver
> and last four patch is about quirk implementation of errata in Synopsis
> DesignWare USB3 IP.
> 
> Patch 1 introduces a quirk with device disconnection management necessary
> Synopsys Designware USB3 IP with versions < 3.00a and hardware configuration
> DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1. It solves a problem where without the
> quirk, that host controller will die after a usb device is disconnected from
> port of root hub.
> 
> Patch 2 is to set Synopsis quirk in xhci platform driver based on xhci platform
> data.
> 
> Patch 3 is to add a revison number 2.90a and 3.00a of Synopsis DesignWare USB3
> IP core driver.
> 
> Patch 4 introduces using a quirk based on a errata of Synopsis
> DesignWare USB3 IP which is versions < 3.00a and has hardware configuration
> DWC_USB3_SUSPEND_ON_DISCONNECT_EN=1, which cannot be read from software. As a
> result this quirk has to be enabled via platform data or device tree.
> 
> Patch 5 introduces Fujitsu Specific Glue layer in Synopsis DesignWare USB3 IP
> driver. 
> 
> Successfully tested on Fujitsu mb86s7x board.
> 
> Changes since v4 (RFC):
> [https://lkml.org/lkml/2015/2/17/13]
>  - based on Felipe's comment, rename dwc3-mb86s70.c to dwc3-fujitsu.c which is
>    more generic.
>  - based on Mathias's comment, remove unhelpful comment, and change the
>    function name of xhci_try_to_clear_csc() to xhci_late_csc_clear_quirk()
>    which is more appropriate.  
> 
> Changes since v3 (RFC):
> [https://lkml.org/lkml/2015/1/25/8]
>  - based on Mathias's comment, fix bug and using xhci_port_state_to_neutral()
>    helper function to mask out some RW1C bits, prevent writing back all the
>    bits read from the PORTSC register.
> 
> Changes since v2 (RFC):
> [https://lkml.org/lkml/2015/1/19/55]
>  - based on Felipe's comment, re-order patches to avoid breaking bisectability,
>  - based on Felipe's comment, add comment to structure's member, and sort it
>    alphabetically,
>  - based on Felipe's comment, add another v2.90 revision number in dwc3 IP.
> 
> Changes since v1 (RFC):
> [https://lkml.org/lkml/2014/12/15/929]
>  - based on Arnd's comment, remove entire unnecessary Fujitsu EHCI/OHCI glue,
>  - based on Felipe's comment, fix mis-using of runtime-pm API and setting dma
>    mask, remove unnecessary comment, and refactor suspend/resume handler in
>    Fujitsu Specific Glue layer in dwc3,
>  - based on Felipe's comment, add more commit log and comments in Synopsis
>    quirk implementation, and separate it into four patches.
> 
> Sneeker Yeh (5):
>   xhci: add a quirk for device disconnection errata for Synopsis
>     Designware USB3     core
>   xhci: Platform: Set Synopsis device disconnection quirk based on
>     platform data
>   usb: dwc3: add revision number DWC3_REVISION_290A and
>     DWC3_REVISION_300A
>   usb: dwc3: Add quirk for Synopsis device disconnection errata
>   usb: dwc3: add Fujitsu Specific Glue layer

Mathias, if you want me to take this series I need your Acked-by,
otherwise I can give you mine, just let me know.

-- 
balbi

Attachment: signature.asc
Description: Digital signature