Re: FW: [PATCH v2] mtd:spi-nor: Add Altera EPCQ Driver

From: Viet Nga Dao
Date: Tue Mar 10 2015 - 04:09:25 EST


>>>> +
>>>> + /* Altera EPCQ/EPCS Flashes */
>>>> + { "epcq16" , EPCQ_INFO(2, 0x15, 0x10000, 32, 0x100) },
>>>> + { "epcq32" , EPCQ_INFO(2, 0x16, 0x10000, 64, 0x100) },
>>>> + { "epcq64" , EPCQ_INFO(2, 0x17, 0x10000, 128, 0x100) },
>>>> + { "epcq128" , EPCQ_INFO(2, 0x18, 0x10000, 256, 0x100) },
>>>> + { "epcq256" , EPCQ_INFO(2, 0x19, 0x10000, 512, 0x100) },
>>>> + { "epcq512" , EPCQ_INFO(2, 0x20, 0x10000, 1024, 0x100) },
>>>> + { "epcs16" , EPCQ_INFO(1, 0x14, 0x10000, 32, 0x100) },
>>>> + { "epcs64" , EPCQ_INFO(1, 0x16, 0x10000, 128, 0x100) },
>>>> + { "epcs128" , EPCQ_INFO(1, 0x18, 0x40000, 256, 0x100) },
>>>> { },
>>>> };
>>>>
>>>> @@ -666,6 +731,14 @@ static const struct spi_device_id
>>>> *spi_nor_read_id(struct spi_nor *nor)
>>>> if (info->jedec_id == jedec) {
>>>> if (info->ext_id == 0 || info->ext_id == ext_jedec)
>>>> return &spi_nor_ids[tmp];
>>>> +
>>>> + /* altera epcq which is non jedec device
>>>> + * use id[4] as opcode id to differentiate
>>>> + * epcs and epcq devices
>>>> + */
>>>> + } else if (info->altera_flash_opcode_id == id[4] &&
>>>> + info->ext_id == id[3]) {
>>>> + return &spi_nor_ids[tmp];
>>>
>>> This is the part I don't like. I think it's fishy, and that this
>>> check may result in false positives. Looks too generic.
>>>
>>> Also the logic of your behavior there seems unclear to me. On the one
>>> hand you don't have JEDEC, so you provide chip name using DT. But in
>>> place above you stop trusting DT info and you try to (kind of)
>>> auto-detect used chip anyway.
>>>
>>> I guess we should finally think about some more generic way of
>>> passing flash info.
>>
>> Actually, i just want fo follow the way current spi-nor doing as much
>> as possible. Like to read the device id and compare with info table.
>> Like double checking from both dtb and the device id. Since the
>> flashes i support do not have JEDEC id but only extended id. But the
>> problem is that some of them have the same extended id, for example
>> epcs64 and epcq32). That is why in my driver, i have to decode 1st
>> byte of ext id to differentiate epcs and ecpq.
>
> I see your point and it makes sense, I just think it shouldn't be part of spi-nor. By adding chip specific code to spi-nor we'll end with hacky code and possible false chips identifications. I can really easily imagine some random chip having the same id[3] and id[4] as one of Altera flashes.
>
> Moreover your patch has not working support for epcs16 and epcs64.
> They don't support 0x9f opcode (SPINOR_OP_RDID), so you would need to add support for 0xab ("Read silicon ID") to the spi-nor.
>
> It's the same problem I have with Broadcom's "w25q128" that doesn't support 0x9f opcode but a 0x90 with 16b reply. You may see my tiny bcm53xxspiflash.c driver:
> http://git.openwrt.org/?p=openwrt.git;a=blob;f=target/linux/bcm53xx/files/drivers/mtd/spi-nor/bcm53xxspiflash.c;h=f192f4e59b71a2444833b5c62dd2239d28f9435d;hb=d105c51a428a72a9af42759c472df9960c496d67
>
> So I'm afraid that if spi-nor gets support for:
> 1) 0xab opcode
> 2) 0x90 opcode
> 3) Some uncommon replies for 0x9f opcode (like Altera ones) it will quickly get hacky & buggy.
>
> So what about:
> 1) Using 0x9f and 0xab in altera_epcq.c
> 2) Finding chip name in altera_epcq.c
> 3) Adding Altera chip names & all sizes to spi-nor.c
> 4) Just passing a chip name to spi-nor.c
>
> It's something I do in bcm53xxspiflash.c. I detect w25q128 using some specific 0x90 opcode and just pass a chip name to the spi-nor.
>
> --
> RafaÅ
>
Ok. I will modify the code the way you suggest.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/