Re: [PATCH 2/5] iommu/mediatek: Add mt8173 IOMMU driver

From: Yong Wu
Date: Mon Mar 09 2015 - 08:21:45 EST


Dear Mitchel,
Thanks very much for your review.

On Fri, 2015-03-06 at 09:15 -0800, Mitchel Humpherys wrote:
> On Fri, Mar 06 2015 at 02:48:17 AM, <yong.wu@xxxxxxxxxxxx> wrote:
> > From: Yong Wu <yong.wu@xxxxxxxxxxxx>
> >
> > This patch adds support for mediatek m4u (MultiMedia Memory Management Unit).
> > Currently this only supports m4u gen 2 with 2 levels of page table on mt8173.
>
> [...]
>
> > +static int mtk_iommu_invalidate_tlb(const struct mtk_iommu_info *piommu,
> > + int isinvall, unsigned int iova_start,
> > + unsigned int iova_end)
> > +{
> > + void __iomem *m4u_base = piommu->m4u_base;
> > + u32 val;
> > + u64 start, end;
> > +
> > + start = sched_clock();
> > +
> > + if (!isinvall) {
> > + iova_start = round_down(iova_start, SZ_4K);
> > + iova_end = round_up(iova_end, SZ_4K);
> > + }
> > +
> > + val = F_MMU_INV_EN_L2 | F_MMU_INV_EN_L1;
> > +
> > + writel(val, m4u_base + REG_INVLID_SEL);
> > +
> > + if (isinvall) {
> > + writel(F_MMU_INV_ALL, m4u_base + REG_MMU_INVLD);
> > + } else {
> > + writel(iova_start, m4u_base + REG_MMU_INVLD_SA);
> > + writel(iova_end, m4u_base + REG_MMU_INVLD_EA);
> > + writel(F_MMU_INV_RANGE, m4u_base + REG_MMU_INVLD);
> > +
> > + while (!readl(m4u_base + REG_MMU_CPE_DONE)) {
> > + end = sched_clock();
> > + if (end - start >= 100000000ULL) {
> > + dev_warn(piommu->dev, "invalid don't done\n");
> > + writel(F_MMU_INV_ALL, m4u_base + REG_MMU_INVLD);
> > + }
> > + };
>
> Superfluous `;'. Also, maybe you should be using readl_poll_timeout?
Thanks.
For the "readl_poll_timeout", My base is 3.19-rc7 and robin's patch.
it don't have this interface. I will try to add it in the next version.
>
> > + writel(0, m4u_base + REG_MMU_CPE_DONE);
> > + }
> > +
> > + return 0;
> > +}
>
>
>
> -Mitch
>


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/