Re: [x86/asm/entry] BUG: unable to handle kernel paging request

From: Denys Vlasenko
Date: Sun Mar 08 2015 - 15:49:27 EST


On Sun, Mar 8, 2015 at 8:13 PM, Denys Vlasenko <vda.linux@xxxxxxxxxxxxxx> wrote:
>> /*
>> * The below -8 is to reserve 8 bytes on top of the ring0 stack.
>> * This is necessary to guarantee that the entire "struct pt_regs"
>> * is accessible even if the CPU haven't stored the SS/ESP registers
>> * on the stack (interrupt gate does not save these registers
>> * when switching to the same priv ring).
>> * Therefore beware: accessing the ss/esp fields of the
>> * "struct pt_regs" is possible, but they may contain the
>> * completely wrong values.
>> */
>> #define task_pt_regs(task) \
>> ({ \
>> struct pt_regs *__regs__; \
>> __regs__ = (struct pt_regs *)(KSTK_TOP(task_stack_page(task))-8); \
>> __regs__ - 1; \
>> })
>>
>> I'm confused about multiple things:
>>
>> 1. I don't understand this comment.
>
> Comment says that in 32-bit x86, interrupts and exceptions
> in ring 0 do not push SS,ESP - they only save EFLAGS,CS,EIP
> in iret frame. (This happens because CPL doesn't
> change, not beacuse ot is zero).
>
> IRET insn likewise does not restore SS,ESP if it detects
> that RPL(stack_CS) = RPL(CS).

It seems that whoever wrote that code were afraid of this behavior
and they added this 8-byte area to ensure that pt_regs->sp
and pt_regs->ss always can be accessed.

They were wrong.

tss.sp0 will only be used on *inter-CPL* interrupts/exceptions,
and those *always* push SS,ESP.

If interrupt/exception happens while we are in CPL0,
it will _not_ use tss.sp0 - it will not switch stacks
since it is already on CPL0-stack. Therefore,
the scenario where SS,ESP are "missing" and must not
be accessed via pt_regs->esp in fear of touching
not-present page is impossible.

Let's just remove this "-8" thingy.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/