[PATCH 00/15] Enhance twl4030_charger functionality.

From: NeilBrown
Date: Mon Feb 23 2015 - 23:35:23 EST


These patches make a number of improvements to twl4030_charger.

So are just internal cleanups (e.g. use of devres). Others allow
better control of charging through both manual and automatic means.

- the maximum current can be configured via sysfs.
- the charger will only draw that current if it can do so without
the voltage dropping too much
- a 'continuous' mode is available which ignores voltage and just
takes what it can (to be used with caution, but very useful in
some circumstances).
- 'ac' and 'usb' power sources can be configured separately.

Some of this functionality requires patch to phy-twl4030-usb.c which
have been sent separately.

Thanks,
NeilBrown


---

NeilBrown (15):
power_supply core: support use of devres to register/unregister a power supply.
twl4030_charger: use devm_request_threaded_irq
twl4030_charger: use devres for power_supply_register and kzalloc.
twl4030_charger: use runtime_pm to keep usb phy active while charging.
twl4030_charger: trust phy to determine when USB power is available.
twl4030_charger: split uA calculation into a function.
twl4030_charger: allow fine control of charger current.
twl4030_charger: distinguish between USB current and 'AC' current
twl4030_charger: allow max_current to be managed via sysfs.
twl4030_charger: only draw USB current as negotiated with host.
twl4030_charger: enable manual enable/disable of usb charging.
twl4030_charger: add software controlled linear charging mode.
twl4030_charger: add ac/mode to match usb/mode
twl4030_charger: Increase current carefully while watching voltage.
twl4030_charger: assume a 'charger' can supply maximum current.


drivers/mfd/twl-core.c | 9 -
drivers/power/power_supply_core.c | 45 +++
drivers/power/twl4030_charger.c | 572 +++++++++++++++++++++++++++++++------
include/linux/power_supply.h | 4
4 files changed, 539 insertions(+), 91 deletions(-)

--
Signature

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/