[RFT/RFC PATCH 7/8] net: dsa: mv88e6171: Use common port configuration

From: Guenter Roeck
Date: Mon Feb 23 2015 - 14:36:58 EST


Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/net/dsa/mv88e6171.c | 19 +------------------
1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c
index 2374205..339484a 100644
--- a/drivers/net/dsa/mv88e6171.c
+++ b/drivers/net/dsa/mv88e6171.c
@@ -226,23 +226,6 @@ static int mv88e6171_setup_port(struct dsa_switch *ds, int p)
*/
REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);

- /* Port based VLAN map: give each port its own address
- * database, allow the CPU port to talk to each of the 'real'
- * ports, and allow each of the 'real' ports to only talk to
- * the upstream port.
- */
- val = (p & 0xf) << 12;
- if (dsa_is_cpu_port(ds, p))
- val |= ds->phys_port_mask;
- else
- val |= 1 << dsa_upstream_port(ds);
- REG_WRITE(addr, 0x06, val);
-
- /* Default VLAN ID and priority: don't set a default VLAN
- * ID, and set the default packet priority to zero.
- */
- REG_WRITE(addr, 0x07, 0x0000);
-
/* Port Control 2: don't force a good FCS, set the maximum
* frame size to 10240 bytes, don't let the switch add or
* strip 802.1q tags, don't discard tagged or untagged frames
@@ -287,7 +270,7 @@ static int mv88e6171_setup_port(struct dsa_switch *ds, int p)
*/
REG_WRITE(addr, 0x19, 0x7654);

- return 0;
+ return mv88e6xxx_setup_port_common(ds, p);
}

static int mv88e6171_setup(struct dsa_switch *ds)
--
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/