[PATCH v2 00/18] Add support to STMicroelectronics STM32 family

From: Maxime Coquelin
Date: Fri Feb 20 2015 - 13:08:29 EST


Thanks for the first round of reviews.
Most of the comments made have been taken into account (see below for details),
except that I failed to find an easy/clean way to move vector_table location in
order to limit the waste of memory.
If you have any idea/example to do that, I will be pleased to add it in next
version of the series.

STM32 MCUs are Cortex-M CPU, used in various applications (consumer
electronics, industrial applications, hobbyists...).
Datasheets, user and programming manuals are publicly available on
STMicroelectronics website.

With this series applied, the STM32F419 Discovery can boot succesfully.

Changes since v1:
-----------------
- Move bindings documentation in their own patches (Andreas)
- Rename ARM System timer to armv7m-systick (Rob)
- Add clock-frequency property handling in armv7m-systick (Rob)
- Re-factor the reset controllers into a single controller (Philipp)
- Add kerneldoc to reset_controller_of_init (Philipp)
- Add named constants in include/dt-bindings/reset/ (Philipp)
- Make pinctrl driver to depend on ARCH_STM32 or COMPILE_TEST (Geert)
- Introduce CPUV7M_NUM_IRQ config flag to indicate the number of interrupts
supported by the MCU, in order to limit memory waste in vectors' table (Uwe)


Maxime Coquelin (18):
scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP
Kernel
ARM: ARMv7M: Enlarge vector table to 256 entries
dt-bindings: Document the ARM System timer bindings
clocksource: Add ARM System timer driver
reset: Add reset_controller_of_init() function
dt-bindings: Document the STM32 reset bindings
drivers: reset: Add STM32 reset driver
dt-bindings: Document the STM32 timer bindings
clockevent: Add STM32 Timer driver
dt-bindings: Document the STM32 pin controller
pinctrl: Add pinctrl driver for STM32 MCUs
dt-bindings: Document the STM32 USART bindings
serial: stm32-usart: Add STM32 USART Driver
ARM: Add STM32 family machine
ARM: dts: Add ARM System timer as clockevent in armv7m
ARM: dts: Introduce STM32F429 MCU
ARM: configs: Add STM32 defconfig
MAINTAINERS: Add entry for STM32 MCUs

Documentation/arm/stm32/overview.txt | 32 +
Documentation/arm/stm32/stm32f429-overview.txt | 22 +
.../devicetree/bindings/arm/armv7m_systick.txt | 26 +
.../devicetree/bindings/pinctrl/pinctrl-stm32.txt | 99 +++
.../devicetree/bindings/reset/st,stm32-reset.txt | 36 +
.../devicetree/bindings/serial/st,stm32-usart.txt | 18 +
.../devicetree/bindings/timer/st,stm32-timer.txt | 19 +
MAINTAINERS | 7 +
arch/arm/Kconfig | 22 +
arch/arm/Makefile | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/armv7-m.dtsi | 7 +
arch/arm/boot/dts/stm32f429-disco.dts | 41 ++
arch/arm/boot/dts/stm32f429.dtsi | 396 +++++++++++
arch/arm/configs/stm32_defconfig | 72 ++
arch/arm/kernel/entry-v7m.S | 13 +-
arch/arm/mach-stm32/Makefile | 1 +
arch/arm/mach-stm32/Makefile.boot | 0
arch/arm/mach-stm32/board-dt.c | 31 +
arch/arm/mm/Kconfig | 15 +
drivers/clocksource/Kconfig | 16 +
drivers/clocksource/Makefile | 2 +
drivers/clocksource/armv7m_systick.c | 78 +++
drivers/clocksource/timer-stm32.c | 187 +++++
drivers/pinctrl/Kconfig | 10 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-stm32.c | 779 +++++++++++++++++++++
drivers/reset/Makefile | 1 +
drivers/reset/core.c | 27 +
drivers/reset/reset-stm32.c | 124 ++++
drivers/tty/serial/Kconfig | 17 +
drivers/tty/serial/Makefile | 1 +
drivers/tty/serial/stm32-usart.c | 695 ++++++++++++++++++
include/asm-generic/vmlinux.lds.h | 4 +-
include/dt-bindings/pinctrl/pinctrl-stm32.h | 43 ++
include/dt-bindings/reset/st,stm32f429.h | 85 +++
include/linux/reset-controller.h | 6 +
include/uapi/linux/serial_core.h | 3 +
scripts/link-vmlinux.sh | 2 +-
39 files changed, 2934 insertions(+), 6 deletions(-)
create mode 100644 Documentation/arm/stm32/overview.txt
create mode 100644 Documentation/arm/stm32/stm32f429-overview.txt
create mode 100644 Documentation/devicetree/bindings/arm/armv7m_systick.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-reset.txt
create mode 100644 Documentation/devicetree/bindings/serial/st,stm32-usart.txt
create mode 100644 Documentation/devicetree/bindings/timer/st,stm32-timer.txt
create mode 100644 arch/arm/boot/dts/stm32f429-disco.dts
create mode 100644 arch/arm/boot/dts/stm32f429.dtsi
create mode 100644 arch/arm/configs/stm32_defconfig
create mode 100644 arch/arm/mach-stm32/Makefile
create mode 100644 arch/arm/mach-stm32/Makefile.boot
create mode 100644 arch/arm/mach-stm32/board-dt.c
create mode 100644 drivers/clocksource/armv7m_systick.c
create mode 100644 drivers/clocksource/timer-stm32.c
create mode 100644 drivers/pinctrl/pinctrl-stm32.c
create mode 100644 drivers/reset/reset-stm32.c
create mode 100644 drivers/tty/serial/stm32-usart.c
create mode 100644 include/dt-bindings/pinctrl/pinctrl-stm32.h
create mode 100644 include/dt-bindings/reset/st,stm32f429.h

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/