[PATCH 3.13.y-ckt 035/103] mm: protect set_page_dirty() from ongoing truncation

From: Kamal Mostafa
Date: Wed Feb 18 2015 - 19:57:23 EST


3.13.11-ckt16 -stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Weiner <hannes@xxxxxxxxxxx>

commit 2d6d7f98284648c5ed113fe22a132148950b140f upstream.

Tejun, while reviewing the code, spotted the following race condition
between the dirtying and truncation of a page:

__set_page_dirty_nobuffers() __delete_from_page_cache()
if (TestSetPageDirty(page))
page->mapping = NULL
if (PageDirty())
dec_zone_page_state(page, NR_FILE_DIRTY);
dec_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);
if (page->mapping)
account_page_dirtied(page)
__inc_zone_page_state(page, NR_FILE_DIRTY);
__inc_bdi_stat(mapping->backing_dev_info, BDI_RECLAIMABLE);

which results in an imbalance of NR_FILE_DIRTY and BDI_RECLAIMABLE.

Dirtiers usually lock out truncation, either by holding the page lock
directly, or in case of zap_pte_range(), by pinning the mapcount with
the page table lock held. The notable exception to this rule, though,
is do_wp_page(), for which this race exists. However, do_wp_page()
already waits for a locked page to unlock before setting the dirty bit,
in order to prevent a race where clear_page_dirty() misses the page bit
in the presence of dirty ptes. Upgrade that wait to a fully locked
set_page_dirty() to also cover the situation explained above.

Afterwards, the code in set_page_dirty() dealing with a truncation race
is no longer needed. Remove it.

Reported-by: Tejun Heo <tj@xxxxxxxxxx>
Signed-off-by: Johannes Weiner <hannes@xxxxxxxxxxx>
Acked-by: Kirill A. Shutemov <kirill.shutemov@xxxxxxxxxxxxxxx>
Reviewed-by: Jan Kara <jack@xxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
[ kamal: backport to 3.13-stable: no VM_BUG_ON_PAGE ]
Signed-off-by: Kamal Mostafa <kamal@xxxxxxxxxxxxx>
---
include/linux/writeback.h | 1 -
mm/memory.c | 27 +++++++++++++++++----------
mm/page-writeback.c | 43 ++++++++++++-------------------------------
3 files changed, 29 insertions(+), 42 deletions(-)

diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 021b8a3..0aa44e2 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -178,7 +178,6 @@ int write_cache_pages(struct address_space *mapping,
struct writeback_control *wbc, writepage_t writepage,
void *data);
int do_writepages(struct address_space *mapping, struct writeback_control *wbc);
-void set_page_dirty_balance(struct page *page, int page_mkwrite);
void writeback_set_ratelimit(void);
void tag_pages_for_writeback(struct address_space *mapping,
pgoff_t start, pgoff_t end);
diff --git a/mm/memory.c b/mm/memory.c
index a5017dd..b24ac03 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2744,17 +2744,24 @@ reuse:
if (!dirty_page)
return ret;

- /*
- * Yes, Virginia, this is actually required to prevent a race
- * with clear_page_dirty_for_io() from clearing the page dirty
- * bit after it clear all dirty ptes, but before a racing
- * do_wp_page installs a dirty pte.
- *
- * __do_fault is protected similarly.
- */
if (!page_mkwrite) {
- wait_on_page_locked(dirty_page);
- set_page_dirty_balance(dirty_page, page_mkwrite);
+ struct address_space *mapping;
+ int dirtied;
+
+ lock_page(dirty_page);
+ dirtied = set_page_dirty(dirty_page);
+ VM_BUG_ON(PageAnon(dirty_page));
+ mapping = dirty_page->mapping;
+ unlock_page(dirty_page);
+
+ if (dirtied && mapping) {
+ /*
+ * Some device drivers do not set page.mapping
+ * but still dirty their pages
+ */
+ balance_dirty_pages_ratelimited(mapping);
+ }
+
/* file_update_time outside page_lock */
if (vma->vm_file)
file_update_time(vma->vm_file);
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 9f45f87..145044b 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -1562,16 +1562,6 @@ pause:
bdi_start_background_writeback(bdi);
}

-void set_page_dirty_balance(struct page *page, int page_mkwrite)
-{
- if (set_page_dirty(page) || page_mkwrite) {
- struct address_space *mapping = page_mapping(page);
-
- if (mapping)
- balance_dirty_pages_ratelimited(mapping);
- }
-}
-
static DEFINE_PER_CPU(int, bdp_ratelimits);

/*
@@ -2161,32 +2151,25 @@ EXPORT_SYMBOL(account_page_writeback);
* page dirty in that case, but not all the buffers. This is a "bottom-up"
* dirtying, whereas __set_page_dirty_buffers() is a "top-down" dirtying.
*
- * Most callers have locked the page, which pins the address_space in memory.
- * But zap_pte_range() does not lock the page, however in that case the
- * mapping is pinned by the vma's ->vm_file reference.
- *
- * We take care to handle the case where the page was truncated from the
- * mapping by re-checking page_mapping() inside tree_lock.
+ * The caller must ensure this doesn't race with truncation. Most will simply
+ * hold the page lock, but e.g. zap_pte_range() calls with the page mapped and
+ * the pte lock held, which also locks out truncation.
*/
int __set_page_dirty_nobuffers(struct page *page)
{
if (!TestSetPageDirty(page)) {
struct address_space *mapping = page_mapping(page);
- struct address_space *mapping2;
unsigned long flags;

if (!mapping)
return 1;

spin_lock_irqsave(&mapping->tree_lock, flags);
- mapping2 = page_mapping(page);
- if (mapping2) { /* Race with truncate? */
- BUG_ON(mapping2 != mapping);
- WARN_ON_ONCE(!PagePrivate(page) && !PageUptodate(page));
- account_page_dirtied(page, mapping);
- radix_tree_tag_set(&mapping->page_tree,
- page_index(page), PAGECACHE_TAG_DIRTY);
- }
+ BUG_ON(page_mapping(page) != mapping);
+ WARN_ON_ONCE(!PagePrivate(page) && !PageUptodate(page));
+ account_page_dirtied(page, mapping);
+ radix_tree_tag_set(&mapping->page_tree, page_index(page),
+ PAGECACHE_TAG_DIRTY);
spin_unlock_irqrestore(&mapping->tree_lock, flags);
if (mapping->host) {
/* !PageAnon && !swapper_space */
@@ -2343,12 +2326,10 @@ int clear_page_dirty_for_io(struct page *page)
/*
* We carefully synchronise fault handlers against
* installing a dirty pte and marking the page dirty
- * at this point. We do this by having them hold the
- * page lock at some point after installing their
- * pte, but before marking the page dirty.
- * Pages are always locked coming in here, so we get
- * the desired exclusion. See mm/memory.c:do_wp_page()
- * for more comments.
+ * at this point. We do this by having them hold the
+ * page lock while dirtying the page, and pages are
+ * always locked coming in here, so we get the desired
+ * exclusion.
*/
if (TestClearPageDirty(page)) {
dec_zone_page_state(page, NR_FILE_DIRTY);
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/