Re: [PATCH v9 2/2] drivers/gpio: Altera soft IP GPIO driver

From: Tien Hock Loh
Date: Thu Feb 05 2015 - 05:25:39 EST


On Tue, Jan 6, 2015 at 4:30 PM, Tobias Klauser <tklauser@xxxxxxxxxx> wrote:
> On 2015-01-06 at 03:19:33 +0100, thloh@xxxxxxxxxx <thloh@xxxxxxxxxx> wrote:
> [...]
>> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
>> index 633ec21..e38beff 100644
>> --- a/drivers/gpio/Kconfig
>> +++ b/drivers/gpio/Kconfig
>> @@ -156,6 +156,14 @@ config GPIO_DWAPB
>> Say Y or M here to build support for the Synopsys DesignWare APB
>> GPIO block.
>>
>> +config GPIO_ALTERA
>> + tristate "Altera GPIO"
>> + depends on OF_GPIO
>> + help
>> + Say Y or M here to build support for the Altera PIO device.
>> +
>> + If driver is built as a module it will be called gpio-altera.
>
> Indentation looks odd. The tristate, depends and help lines should be
> indented by a tab and the help text should be indented by a tab followed
> by two spaces.
>

Yeah I didn't notice this. I'll fix it.

>> +
>> config GPIO_IT8761E
>> tristate "IT8761E GPIO support"
>> depends on X86 # unconditional access to IO space.
>> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
>> index 81755f1..239b28b 100644
> [...]
>> diff --git a/drivers/gpio/gpio-altera.c b/drivers/gpio/gpio-altera.c
>> new file mode 100644
>> index 0000000..a57b7ab
>> --- /dev/null
>> +++ b/drivers/gpio/gpio-altera.c
> [...]
>> +int altera_gpio_probe(struct platform_device *pdev)
>> +{
>> + struct device_node *node = pdev->dev.of_node;
>> + int id, reg, ret;
>> + struct altera_gpio_chip *altera_gc;
>> +
>> + altera_gc = devm_kzalloc(&pdev->dev, sizeof(*altera_gc), GFP_KERNEL);
>> + if (!altera_gc)
>> + return -ENOMEM;
>> +
>> + spin_lock_init(&altera_gc->gpio_lock);
>> +
>> + id = pdev->id;
>
> id is assigned but never used.

I'll remove this.

>
>> +
>> + if (of_property_read_u32(node, "altr,ngpio", &reg))
>> + /*By default assume full GPIO controller*/
>
> Spaces missing after /* and before */
>
>> + altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO;
>> + else
>> + altera_gc->mmchip.gc.ngpio = reg;
>> +
>> + if (altera_gc->mmchip.gc.ngpio > 32) {
>
> Why the magic number 32 here? Better use ALTERA_GPIO_MAX_NGPIO as well.

Noted.

>
>> + dev_warn(&pdev->dev,
>> + "ngpio is greater than %d, defaulting to %d\n",
>> + ALTERA_GPIO_MAX_NGPIO, ALTERA_GPIO_MAX_NGPIO);
>> + altera_gc->mmchip.gc.ngpio = ALTERA_GPIO_MAX_NGPIO;
>> + }
>> +
>> + altera_gc->mmchip.gc.direction_input = altera_gpio_direction_input;
>> + altera_gc->mmchip.gc.direction_output = altera_gpio_direction_output;
>> + altera_gc->mmchip.gc.get = altera_gpio_get;
>> + altera_gc->mmchip.gc.set = altera_gpio_set;
>> + altera_gc->mmchip.gc.owner = THIS_MODULE;
>> + altera_gc->mmchip.gc.dev = &pdev->dev;
>> +
>> + ret = of_mm_gpiochip_add(node, &altera_gc->mmchip);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Failed adding memory mapped gpiochip\n");
>> + return ret;
>> + }
>> +
>> + platform_set_drvdata(pdev, altera_gc);
>> +
>> + altera_gc->mapped_irq = platform_get_irq(pdev, 0);
>> +
>> + if (altera_gc->mapped_irq < 0)
>> + goto skip_irq;
>> +
>> + if (of_property_read_u32(node, "altr,interrupt-type", &reg)) {
>> + ret = -EINVAL;
>> + dev_err(&pdev->dev,
>> + "altr,interrupt-type value not set in device tree\n");
>> + goto teardown;
>> + }
>> + altera_gc->interrupt_trigger = reg;
>> +
>> + ret = gpiochip_irqchip_add(&altera_gc->mmchip.gc, &altera_irq_chip, 0,
>> + handle_simple_irq, IRQ_TYPE_NONE);
>> +
>> + if (ret) {
>> + dev_info(&pdev->dev, "could not add irqchip\n");
>> + return ret;
>> + }
>> +
>> + gpiochip_set_chained_irqchip(&altera_gc->mmchip.gc,
>> + &altera_irq_chip,
>> + altera_gc->mapped_irq,
>> + altera_gc->interrupt_trigger == IRQ_TYPE_LEVEL_HIGH ?
>> + altera_gpio_irq_leveL_high_handler :
>> + altera_gpio_irq_edge_handler);
>> +
>> +skip_irq:
>> + return 0;
>> +teardown:
>> + pr_err("%s: registration failed with status %d\n",
>> + node->full_name, ret);
>> +
>> + return ret;
>> +}
>> +
>> +static int altera_gpio_remove(struct platform_device *pdev)
>> +{
>> + struct altera_gpio_chip *altera_gc = platform_get_drvdata(pdev);
>> +
>> + gpiochip_remove(&altera_gc->mmchip.gc);
>> +
>> + irq_set_handler_data(altera_gc->mapped_irq, NULL);
>> + irq_set_chained_handler(altera_gc->mapped_irq, NULL);
>> + return -EIO;
>> +}
>> +
>> +static const struct of_device_id altera_gpio_of_match[] = {
>> + { .compatible = "altr,pio-1.0", },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, altera_gpio_of_match);
>> +
>> +static struct platform_driver altera_gpio_driver = {
>> + .driver = {
>> + .name = "altera_gpio",
>> + .owner = THIS_MODULE,
>
> No need to set this here, platform_driver_register will take care of it.
>

Noted.

>> + .of_match_table = of_match_ptr(altera_gpio_of_match),
>> + },
>> + .probe = altera_gpio_probe,
>> + .remove = altera_gpio_remove,
>> +};
>> +
>> +static int __init altera_gpio_init(void)
>> +{
>> + return platform_driver_register(&altera_gpio_driver);
>> +}
>> +subsys_initcall(altera_gpio_init);
>> +
>> +static void __exit altera_gpio_exit(void)
>> +{
>> + platform_driver_unregister(&altera_gpio_driver);
>> +}
>> +module_exit(altera_gpio_exit);
>> +
>> +MODULE_AUTHOR("Tien Hock Loh <thloh@xxxxxxxxxx>");
>> +MODULE_DESCRIPTION("Altera GPIO driver");
>> +MODULE_LICENSE("GPL");
>> --
>> 1.7.11.GIT
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>>

Regards,
Tien Hock Loh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/