Re: [PATCH v6 0/2] clocksource: Conexant CX92755 timers support
From: Daniel Lezcano
Date:  Mon Jan 26 2015 - 16:24:06 EST
Hi Baruch,
applied the series for 3.20.
Thanks !
  -- Daniel
On 01/26/2015 07:35 PM, Baruch Siach wrote:
This short series adds support for the Conexant CX92755 SoC timers. This SoC is
part of the Conexant Digicolor series of SoCs.
v6:
    * Use a dedicated config symbol, CONFIG_DIGICOLOR_TIMER, to enable the
	 driver (Daniel Lezcano)
v5:
    http://thread.gmane.org/gmane.linux.kernel/1874237
    * Switch back to use of_iomap (not of_io_request_and_map), as the watchdog
	 driver also needs access to the same registers; add a comment clarifying
	 this
    Address more review comments by Daniel Lezcano:
    * Properly encapsulate the static objects for the clock_event code
    * Use dc_timer_{disable,enable,set_count} accessors to make the code clearer
v4:
    http://thread.gmane.org/gmane.linux.kernel/1874017
    Address review comments by Daniel Lezcano:
    * Use macros for register configuration values
    * Encapsulate static objects in a struct
    * Use of_io_request_and_map to exclusively map registers
    * Use UINT_MAX instead of ~0
    * Use request_irq instead of setup_irq, obviating the need for a separate
      irqaction struct
v3:
    http://article.gmane.org/gmane.linux.kernel/1870628
    http://article.gmane.org/gmane.linux.kernel/1870627
    * Split into a separate clocksource series
v2:
    http://article.gmane.org/gmane.linux.kernel/1861850
    http://article.gmane.org/gmane.linux.kernel/1861853
    * Change the timer dt binding, so that the 'reg' property points to the
      first "Agent Communication" register. This should improve the chance of
      reusing this binding for other SoCs in this series.
    * Add the CONTROL() and COUNT() macros to the timer driver to make the code
      clearer.
    * Move arch/arm Kconfig changes from the clocksource driver patch to the
      base arch support patch to reduce dependency between them
v1:
    http://article.gmane.org/gmane.linux.kernel/1855028
    http://article.gmane.org/gmane.linux.kernel/1855025
Baruch Siach (2):
   clocksource: devicetree: document Conexant Digicolor timer binding
   clocksource: driver for Conexant Digicolor SoC timer
  .../devicetree/bindings/timer/digicolor-timer.txt  |  18 ++
  drivers/clocksource/Kconfig                        |   3 +
  drivers/clocksource/Makefile                       |   1 +
  drivers/clocksource/timer-digicolor.c              | 199 +++++++++++++++++++++
  4 files changed, 221 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/timer/digicolor-timer.txt
  create mode 100644 drivers/clocksource/timer-digicolor.c
--
 <http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs
Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/