[PATCH 5/8] ARM: dts: mt8135: Add pericfg, infracfg and pmic wrapper nodes

From: Sascha Hauer
Date: Tue Jan 20 2015 - 04:48:40 EST


This adds the perisys, infracfg and pmic wrapper nodes to the
MediaTek MT8135 dtsi file.

Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/mt8135.dtsi | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index 7d56a98..14ba41d 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -14,6 +14,7 @@

#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset-controller/mt8135-resets.h>
#include "skeleton64.dtsi"

/ {
@@ -86,6 +87,12 @@
clock-frequency = <32000>;
#clock-cells = <0>;
};
+
+ clk_26m: clk26m {
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ #clock-cells = <0>;
+ };
};

soc {
@@ -94,6 +101,33 @@
compatible = "simple-bus";
ranges;

+ infracfg: infracfg@10001000 {
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ compatible = "mediatek,mt8135-infracfg";
+ reg = <0 0x10001000 0 0x1000>;
+ };
+
+ pericfg: pericfg@10003000 {
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ compatible = "mediatek,mt8135-pericfg";
+ reg = <0 0x10003000 0 0x1000>;
+ };
+
+ pwrap: pwrap@1000f000 {
+ compatible = "mediatek,mt8135-pwrap";
+ reg = <0 0x1000f000 0 0x1000>,
+ <0 0x11017000 0 0x1000>;
+ reg-names = "pwrap-base", "pwrap-bridge-base";
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+ <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+ reset-names = "pwrap", "pwrap-bridge";
+ clocks = <&clk_26m>, <&clk_26m>;
+ clock-names = "spi", "wrap";
+ };
+
timer: timer@10008000 {
compatible = "mediatek,mt8135-timer",
"mediatek,mt6577-timer";
--
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/