Re: [PATCH v4 2/5] ARM:sunxi:drivers:input Add support for A10/A20 PS2

From: Dmitry Torokhov
Date: Sat Jan 17 2015 - 17:25:42 EST


Hi Vishnu,

On Fri, Jan 16, 2015 at 07:33:38PM +0530, Vishnu Patekar wrote:
> Signed-off-by: VishnuPatekar <vishnupatekar0510@xxxxxxxxx>
> ---
> drivers/input/serio/Kconfig | 11 ++
> drivers/input/serio/Makefile | 1 +
> drivers/input/serio/sun4i-ps2.c | 330 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 342 insertions(+)
> create mode 100644 drivers/input/serio/sun4i-ps2.c
>
> diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
> index bc2d474..964afc5 100644
> --- a/drivers/input/serio/Kconfig
> +++ b/drivers/input/serio/Kconfig
> @@ -281,4 +281,15 @@ config HYPERV_KEYBOARD
> To compile this driver as a module, choose M here: the module will
> be called hyperv_keyboard.
>
> +config SERIO_SUN4I_PS2
> + tristate "Allwinner A10 PS/2 controller support"
> + default n
> + depends on ARCH_SUNXI || COMPILE_TEST
> + help
> + This selects support for the PS/2 Host Controller on
> + Allwinner A10.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called sun4i-ps2.
> +
> endif
> diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
> index 815d874..c600089 100644
> --- a/drivers/input/serio/Makefile
> +++ b/drivers/input/serio/Makefile
> @@ -29,3 +29,4 @@ obj-$(CONFIG_SERIO_ARC_PS2) += arc_ps2.o
> obj-$(CONFIG_SERIO_APBPS2) += apbps2.o
> obj-$(CONFIG_SERIO_OLPC_APSP) += olpc_apsp.o
> obj-$(CONFIG_HYPERV_KEYBOARD) += hyperv-keyboard.o
> +obj-$(CONFIG_SERIO_SUN4I_PS2) += sun4i-ps2.o
> diff --git a/drivers/input/serio/sun4i-ps2.c b/drivers/input/serio/sun4i-ps2.c
> new file mode 100644
> index 0000000..06b3fef
> --- /dev/null
> +++ b/drivers/input/serio/sun4i-ps2.c
> @@ -0,0 +1,330 @@
> +/*
> + * Driver for Allwinner A10 PS2 host controller
> + *
> + * Author: Vishnu Patekar <vishnupatekar0510@xxxxxxxxx>
> + * Aaron.maoye <leafy.myeh@xxxxxxxxxxxxxx>
> + *
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/serio.h>
> +#include <linux/interrupt.h>
> +#include <linux/errno.h>
> +#include <linux/slab.h>
> +#include <linux/list.h>
> +#include <linux/io.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +
> +#define DRIVER_NAME "sun4i-ps2"
> +
> +/* register offset definitions */
> +#define PS2_REG_GCTL 0x00 /* PS2 Module Global Control Reg */
> +#define PS2_REG_DATA 0x04 /* PS2 Module Data Reg */
> +#define PS2_REG_LCTL 0x08 /* PS2 Module Line Control Reg */
> +#define PS2_REG_LSTS 0x0C /* PS2 Module Line Status Reg */
> +#define PS2_REG_FCTL 0x10 /* PS2 Module FIFO Control Reg */
> +#define PS2_REG_FSTS 0x14 /* PS2 Module FIFO Status Reg */
> +#define PS2_REG_CLKDR 0x18 /* PS2 Module Clock Divider Reg*/
> +
> +/* PS2 GLOBAL CONTROL REGISTER PS2_GCTL */
> +#define PS2_GCTL_INTFLAG BIT(4)
> +#define PS2_GCTL_INTEN BIT(3)
> +#define PS2_GCTL_RESET BIT(2)
> +#define PS2_GCTL_MASTER BIT(1)
> +#define PS2_GCTL_BUSEN BIT(0)
> +
> +/* PS2 LINE CONTROL REGISTER */
> +#define PS2_LCTL_NOACK BIT(18)
> +#define PS2_LCTL_TXDTOEN BIT(8)
> +#define PS2_LCTL_STOPERREN BIT(3)
> +#define PS2_LCTL_ACKERREN BIT(2)
> +#define PS2_LCTL_PARERREN BIT(1)
> +#define PS2_LCTL_RXDTOEN BIT(0)
> +
> +/* PS2 LINE STATUS REGISTER */
> +#define PS2_LSTS_TXTDO BIT(8)
> +#define PS2_LSTS_STOPERR BIT(3)
> +#define PS2_LSTS_ACKERR BIT(2)
> +#define PS2_LSTS_PARERR BIT(1)
> +#define PS2_LSTS_RXTDO BIT(0)
> +
> +#define PS2_LINE_ERROR_BIT \
> + (PS2_LSTS_TXTDO | PS2_LSTS_STOPERR | PS2_LSTS_ACKERR | \
> + PS2_LSTS_PARERR | PS2_LSTS_RXTDO)
> +
> +/* PS2 FIFO CONTROL REGISTER */
> +#define PS2_FCTL_TXRST BIT(17)
> +#define PS2_FCTL_RXRST BIT(16)
> +#define PS2_FCTL_TXUFIEN BIT(10)
> +#define PS2_FCTL_TXOFIEN BIT(9)
> +#define PS2_FCTL_TXRDYIEN BIT(8)
> +#define PS2_FCTL_RXUFIEN BIT(2)
> +#define PS2_FCTL_RXOFIEN BIT(1)
> +#define PS2_FCTL_RXRDYIEN BIT(0)
> +
> +/* PS2 FIFO STATUS REGISTER */
> +#define PS2_FSTS_TXUF BIT(10)
> +#define PS2_FSTS_TXOF BIT(9)
> +#define PS2_FSTS_TXRDY BIT(8)
> +#define PS2_FSTS_RXUF BIT(2)
> +#define PS2_FSTS_RXOF BIT(1)
> +#define PS2_FSTS_RXRDY BIT(0)
> +
> +#define PS2_FIFO_ERROR_BIT \
> + (PS2_FSTS_TXUF | PS2_FSTS_TXOF | PS2_FSTS_RXUF | PS2_FSTS_RXOF)
> +
> +#define PS2_SAMPLE_CLK 1000000
> +#define PS2_SCLK 125000
> +
> +struct sun4i_ps2data {
> + struct serio *serio;
> + struct device *dev;
> +
> + /* IO mapping base */
> + void __iomem *reg_base;
> +
> + /* clock management */
> + struct clk *clk;
> +
> + /* irq */
> + spinlock_t lock;
> + int irq;
> +};
> +
> +/*********************/
> +/* Interrupt handler */
> +/*********************/
> +static irqreturn_t sun4i_ps2_interrupt(int irq, void *dev_id)
> +{
> + struct sun4i_ps2data *drvdata = dev_id;
> + u32 intr_status;
> + u32 fifo_status;
> + unsigned char byte;
> + unsigned int rxflags = 0;
> + u32 rval;
> +
> + spin_lock(&drvdata->lock);
> +
> + /* Get the PS/2 interrupts and clear them */
> + intr_status = readl(drvdata->reg_base + PS2_REG_LSTS);
> + fifo_status = readl(drvdata->reg_base + PS2_REG_FSTS);
> +
> + /*Check Line Status Register*/
> + if (intr_status & PS2_LINE_ERROR_BIT) {
> + rxflags = (intr_status & PS2_LINE_ERROR_BIT) ? SERIO_FRAME : 0;
> + rxflags |= (intr_status & PS2_LSTS_PARERR) ? SERIO_PARITY : 0;
> + rxflags |= (intr_status & PS2_LSTS_PARERR) ? SERIO_TIMEOUT : 0;
> +
> + rval = PS2_LSTS_TXTDO | PS2_LSTS_STOPERR | PS2_LSTS_ACKERR |
> + PS2_LSTS_PARERR | PS2_LSTS_RXTDO;
> + writel(rval, drvdata->reg_base + PS2_REG_LSTS);
> + }
> +
> + /*Check FIFO Status Register*/
> + if (fifo_status & PS2_FIFO_ERROR_BIT) {
> + rval = PS2_FSTS_TXUF | PS2_FSTS_TXOF | PS2_FSTS_TXRDY |
> + PS2_FSTS_RXUF | PS2_FSTS_RXOF | PS2_FSTS_RXRDY;
> + writel(rval, drvdata->reg_base + PS2_REG_FSTS);
> + }
> +
> + rval = (fifo_status >> 16) & 0x3;
> + while (rval--) {
> + byte = readl(drvdata->reg_base + PS2_REG_DATA) & 0xff;
> + serio_interrupt(drvdata->serio, byte, rxflags);
> + }
> +
> + writel(intr_status, drvdata->reg_base + PS2_REG_LSTS);
> + writel(fifo_status, drvdata->reg_base + PS2_REG_FSTS);
> +
> + spin_unlock(&drvdata->lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +
> +static int sun4i_ps2_open(struct serio *pserio)
> +{
> + struct sun4i_ps2data *drvdata = pserio->port_data;
> + u32 src_clk = 0;
> + u32 clk_scdf;
> + u32 clk_pcdf;
> + u32 rval;
> + unsigned long flags;
> +
> + /*Set Line Control And Enable Interrupt*/
> + rval = PS2_LCTL_STOPERREN | PS2_LCTL_ACKERREN
> + | PS2_LCTL_PARERREN | PS2_LCTL_RXDTOEN;
> + writel(rval, drvdata->reg_base + PS2_REG_LCTL);
> +
> + /*Reset FIFO*/
> + rval = PS2_FCTL_TXRST | PS2_FCTL_RXRST | PS2_FCTL_TXUFIEN
> + | PS2_FCTL_TXOFIEN | PS2_FCTL_RXUFIEN
> + | PS2_FCTL_RXOFIEN | PS2_FCTL_RXRDYIEN;
> +
> + writel(rval, drvdata->reg_base + PS2_REG_FCTL);
> +
> + src_clk = clk_get_rate(drvdata->clk);
> + /*Set Clock Divider Register*/
> + clk_scdf = src_clk / PS2_SAMPLE_CLK - 1;
> + clk_pcdf = PS2_SAMPLE_CLK / PS2_SCLK - 1;
> + rval = (clk_scdf<<8) | clk_pcdf;
> + writel(rval, drvdata->reg_base + PS2_REG_CLKDR);
> +
> +
> + /*Set Global Control Register*/
> + rval = PS2_GCTL_RESET | PS2_GCTL_INTEN | PS2_GCTL_MASTER
> + | PS2_GCTL_BUSEN;
> +
> + spin_lock_irqsave(&drvdata->lock, flags);
> + writel(rval, drvdata->reg_base + PS2_REG_GCTL);
> + spin_unlock_irqrestore(&drvdata->lock, flags);
> +
> + return 0;
> +}
> +
> +static void sun4i_ps2_close(struct serio *pserio)
> +{
> + struct sun4i_ps2data *drvdata = pserio->port_data;
> +
> + synchronize_irq(drvdata->irq);

synchronize_irq() on it's own is not very useful. You also need to shut
off interrupts on the chip (I suppose by clearing PS2_GCTL_INTEN?)
before calling synchronize_irq.

> +}
> +
> +static int sun4i_ps2_write(struct serio *pserio, unsigned char val)
> +{
> + unsigned long expire = jiffies + msecs_to_jiffies(10000);
> + struct sun4i_ps2data *drvdata;
> +
> + drvdata = (struct sun4i_ps2data *)pserio->port_data;
> +
> + do {
> + if (readl(drvdata->reg_base + PS2_REG_FSTS) & PS2_FSTS_TXRDY) {
> + writel(val, drvdata->reg_base + PS2_REG_DATA);
> + return 0;
> + }
> + } while (time_before(jiffies, expire));
> +
> + return SERIO_TIMEOUT;
> +}
> +
> +static int sun4i_ps2_probe(struct platform_device *pdev)
> +{
> + struct resource *res; /* IO mem resources */
> + struct sun4i_ps2data *drvdata;
> + struct serio *serio;
> + struct device *dev = &pdev->dev;
> + unsigned int irq;
> + int error;
> +
> + drvdata = devm_kzalloc(dev, sizeof(struct sun4i_ps2data), GFP_KERNEL);
> + serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
> + if (!drvdata || !serio) {
> + error = -ENOMEM;
> + goto err_free_mem;
> + }
> +
> + spin_lock_init(&drvdata->lock);
> +
> + /* IO */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + drvdata->reg_base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(drvdata->reg_base)) {
> + dev_err(dev, "failed to map registers\n");
> + error = PTR_ERR(drvdata->reg_base);
> + goto err_free_mem;
> + }
> +
> + drvdata->clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(drvdata->clk)) {
> + error = PTR_ERR(drvdata->clk);
> + dev_err(dev, "couldn't get clock %d\n", error);
> + goto err_free_mem;
> + }
> +
> + error = clk_prepare_enable(drvdata->clk);
> + if (error) {
> + dev_err(dev, "failed to enable clock %d\n", error);
> + goto err_free_mem;
> + }
> +
> + serio->id.type = SERIO_8042;
> + serio->write = sun4i_ps2_write;
> + serio->open = sun4i_ps2_open;
> + serio->close = sun4i_ps2_close;
> + serio->port_data = drvdata;
> + serio->dev.parent = dev;
> + strlcpy(serio->name, dev_name(dev), sizeof(serio->name));
> + strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys));
> +
> + /* Get IRQ for the device */
> + irq = platform_get_irq(pdev, 0);
> + if (!irq) {
> + dev_err(dev, "no IRQ found\n");
> + error = -ENXIO;
> + goto error_disable_clk;
> + }
> +
> + drvdata->irq = irq;
> + drvdata->serio = serio;
> + drvdata->dev = dev;
> + error = devm_request_threaded_irq(dev, drvdata->irq,
> + sun4i_ps2_interrupt, NULL, 0, DRIVER_NAME, drvdata);
> +
> + if (error) {
> + dev_err(drvdata->dev, "Interrupt alloc failed %d:error:%d\n",
> + drvdata->irq, error);
> + goto error_disable_clk;
> + }
> +
> + serio_register_port(serio);
> + platform_set_drvdata(pdev, drvdata);
> +
> + return 0; /* success */
> +
> +error_disable_clk:
> + clk_disable_unprepare(drvdata->clk);
> +
> +err_free_mem:
> + kfree(serio);
> + return error;
> +}
> +
> +static int sun4i_ps2_remove(struct platform_device *pdev)
> +{
> + struct sun4i_ps2data *drvdata = platform_get_drvdata(pdev);
> +
> + serio_unregister_port(drvdata->serio);
> +
> + if (!IS_ERR(drvdata->clk))
> + clk_disable_unprepare(drvdata->clk);
> + kfree(drvdata->serio);

Serio is refcounted, you do not free it after its has been registered.
Overall I'd rather you did not use devm* interfaces here since you are
forced to mix managed and manually freed resources.

> +
> + return 0;
> +}
> +
> +static const struct of_device_id sun4i_ps2_match[] = {
> + { .compatible = "allwinner,sun4i-a10-ps2", },
> + { },
> +};
> +
> +MODULE_DEVICE_TABLE(of, sun4i_ps2_match);
> +
> +static struct platform_driver sun4i_ps2_driver = {
> + .probe = sun4i_ps2_probe,
> + .remove = sun4i_ps2_remove,
> + .driver = {
> + .name = DRIVER_NAME,
> + .of_match_table = sun4i_ps2_match,
> + },
> +};
> +module_platform_driver(sun4i_ps2_driver);
> +
> +MODULE_AUTHOR("Vishnu Patekar <vishnupatekar0510@xxxxxxxxx>");
> +MODULE_AUTHOR("Aaron.maoye <leafy.myeh@xxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Allwinner A10/Sun4i PS/2 driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.7.9.5
>

Thanks.

--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/