[PATCH v11 8/9] ARM: EXYNOS: Add support for non-secure L2X0 resume

From: Marek Szyprowski
Date: Mon Jan 05 2015 - 07:20:08 EST


From: Tomasz Figa <t.figa@xxxxxxxxxxx>

On Exynos SoCs it is necessary to resume operation of L2C early in
assembly code, because otherwise certain systems will crash. This patch
adds necessary code to non-secure resume handler.

Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
[rewrote the code accessing l2x0_saved_regs]
Sigend-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Acked-by: Arnd Bergmann <arnd@xxxxxxxx>
Acked-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
---
arch/arm/mach-exynos/sleep.S | 46 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)

diff --git a/arch/arm/mach-exynos/sleep.S b/arch/arm/mach-exynos/sleep.S
index e3c373082bbe..31d25834b9c4 100644
--- a/arch/arm/mach-exynos/sleep.S
+++ b/arch/arm/mach-exynos/sleep.S
@@ -16,6 +16,8 @@
*/

#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
#include "smc.h"

#define CPU_MASK 0xff0ffff0
@@ -74,6 +76,45 @@ ENTRY(exynos_cpu_resume_ns)
mov r0, #SMC_CMD_C15RESUME
dsb
smc #0
+#ifdef CONFIG_CACHE_L2X0
+ adr r0, 1f
+ ldr r2, [r0]
+ add r0, r2, r0
+
+ /* Check that the address has been initialised. */
+ ldr r1, [r0, #L2X0_R_PHY_BASE]
+ teq r1, #0
+ beq skip_l2x0
+
+ /* Check if controller has been enabled. */
+ ldr r2, [r1, #L2X0_CTRL]
+ tst r2, #0x1
+ bne skip_l2x0
+
+ ldr r1, [r0, #L2X0_R_TAG_LATENCY]
+ ldr r2, [r0, #L2X0_R_DATA_LATENCY]
+ ldr r3, [r0, #L2X0_R_PREFETCH_CTRL]
+ mov r0, #SMC_CMD_L2X0SETUP1
+ smc #0
+
+ /* Reload saved regs pointer because smc corrupts registers. */
+ adr r0, 1f
+ ldr r2, [r0]
+ add r0, r2, r0
+
+ ldr r1, [r0, #L2X0_R_PWR_CTRL]
+ ldr r2, [r0, #L2X0_R_AUX_CTRL]
+ mov r0, #SMC_CMD_L2X0SETUP2
+ smc #0
+
+ mov r0, #SMC_CMD_L2X0INVALL
+ smc #0
+
+ mov r1, #1
+ mov r0, #SMC_CMD_L2X0CTRL
+ smc #0
+skip_l2x0:
+#endif /* CONFIG_CACHE_L2X0 */
skip_cp15:
b cpu_resume
ENDPROC(exynos_cpu_resume_ns)
@@ -83,3 +124,8 @@ cp15_save_diag:
.globl cp15_save_power
cp15_save_power:
.long 0 @ cp15 power control
+
+#ifdef CONFIG_CACHE_L2X0
+ .align
+1: .long l2x0_saved_regs - .
+#endif /* CONFIG_CACHE_L2X0 */
--
1.9.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/