Re: [PATCH v5 5/7] power: Add support for DA9150 Charger

From: Jonathan Cameron
Date: Sun Jan 04 2015 - 12:26:24 EST


On 22/12/14 16:51, Adam Thomson wrote:
> This patch adds support for DA9150 Charger & Fuel-Gauge IC Charger.
>
> Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
The IIO bits look fine, but your use of devm_free * doesn't...

As a side note, looks like we could benefit from some array versions
of the IIO channel getting and release functions. Would save a fair bit
of boiler plate.

Jonathan
> ---
> drivers/power/Kconfig | 12 +
> drivers/power/Makefile | 1 +
> drivers/power/da9150-charger.c | 666 +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 679 insertions(+)
> create mode 100644 drivers/power/da9150-charger.c
>
> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> index 0108c2a..eb79a7a 100644
> --- a/drivers/power/Kconfig
> +++ b/drivers/power/Kconfig
> @@ -192,6 +192,18 @@ config BATTERY_DA9052
> Say Y here to enable support for batteries charger integrated into
> DA9052 PMIC.
>
> +config CHARGER_DA9150
> + tristate "Dialog Semiconductor DA9150 Charger support"
> + depends on MFD_DA9150
> + depends on DA9150_GPADC
> + depends on IIO
> + help
> + Say Y here to enable support for charger unit of the DA9150
> + Integrated Charger & Fuel-Gauge IC.
> +
> + This driver can also be built as a module. If so, the module will be
> + called da9150-charger.
> +
> config BATTERY_MAX17040
> tristate "Maxim MAX17040 Fuel Gauge"
> depends on I2C
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index dfa8942..0c1896d 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -31,6 +31,7 @@ obj-$(CONFIG_BATTERY_SBS) += sbs-battery.o
> obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
> obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
> obj-$(CONFIG_BATTERY_DA9052) += da9052-battery.o
> +obj-$(CONFIG_CHARGER_DA9150) += da9150-charger.o
> obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
> obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
> obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
> diff --git a/drivers/power/da9150-charger.c b/drivers/power/da9150-charger.c
> new file mode 100644
> index 0000000..9b1826d
> --- /dev/null
> +++ b/drivers/power/da9150-charger.c
> @@ -0,0 +1,666 @@
> +/*
> + * DA9150 Charger Driver
> + *
> + * Copyright (c) 2014 Dialog Semiconductor
> + *
> + * Author: Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/interrupt.h>
> +#include <linux/power_supply.h>
> +#include <linux/notifier.h>
> +#include <linux/usb/phy.h>
> +#include <linux/iio/consumer.h>
> +#include <linux/mfd/da9150/core.h>
> +#include <linux/mfd/da9150/registers.h>
> +
> +/* Private data */
> +struct da9150_charger {
> + struct da9150 *da9150;
> + struct device *dev;
> +
> + struct power_supply usb;
> + struct power_supply battery;
> + struct power_supply *supply_online;
> +
> + struct usb_phy *usb_phy;
> + struct notifier_block otg_nb;
> + struct work_struct otg_work;
> + unsigned long usb_event;
> +
> + struct iio_channel *ibus_chan;
> + struct iio_channel *vbus_chan;
> + struct iio_channel *tjunc_chan;
> + struct iio_channel *vbat_chan;
> +};
> +
> +static inline int da9150_charger_supply_online(struct da9150_charger *charger,
> + struct power_supply *psy,
> + union power_supply_propval *val)
> +{
> + val->intval = (psy == charger->supply_online) ? 1 : 0;
> +
> + return 0;
> +}
> +
> +/* Charger Properties */
> +static int da9150_charger_vbus_voltage_now(struct da9150_charger *charger,
> + union power_supply_propval *val)
> +{
> + int v_val, ret;
> +
> + /* Read processed value - mV units */
> + ret = iio_read_channel_processed(charger->vbus_chan, &v_val);
> + if (ret < 0)
> + return ret;
> +
> + /* Convert voltage to expected uV units */
> + val->intval = v_val * 1000;
> +
> + return 0;
> +}
> +
> +static int da9150_charger_ibus_current_avg(struct da9150_charger *charger,
> + union power_supply_propval *val)
> +{
> + int i_val, ret;
> +
> + /* Read processed value - mA units */
> + ret = iio_read_channel_processed(charger->ibus_chan, &i_val);
> + if (ret < 0)
> + return ret;
> +
> + /* Convert current to expected uA units */
> + val->intval = i_val * 1000;
> +
> + return 0;
> +}
> +
> +static int da9150_charger_tjunc_temp(struct da9150_charger *charger,
> + union power_supply_propval *val)
> +{
> + int t_val, ret;
> +
> + /* Read processed value - 0.001 degrees C units */
> + ret = iio_read_channel_processed(charger->tjunc_chan, &t_val);
> + if (ret < 0)
> + return ret;
> +
> + /* Convert temp to expect 0.1 degrees C units */
> + val->intval = t_val / 100;
> +
> + return 0;
> +}
> +
> +static enum power_supply_property da9150_charger_props[] = {
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_CURRENT_AVG,
> + POWER_SUPPLY_PROP_TEMP,
> +};
> +
> +static int da9150_charger_get_prop(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct da9150_charger *charger = dev_get_drvdata(psy->dev->parent);
> + int ret;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_ONLINE:
> + ret = da9150_charger_supply_online(charger, psy, val);
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + ret = da9150_charger_vbus_voltage_now(charger, val);
> + break;
> + case POWER_SUPPLY_PROP_CURRENT_AVG:
> + ret = da9150_charger_ibus_current_avg(charger, val);
> + break;
> + case POWER_SUPPLY_PROP_TEMP:
> + ret = da9150_charger_tjunc_temp(charger, val);
> + break;
> + default:
> + ret = -EINVAL;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +/* Battery Properties */
> +static int da9150_charger_battery_status(struct da9150_charger *charger,
> + union power_supply_propval *val)
> +{
> + u8 reg;
> +
> + /* Check to see if battery is discharging */
> + reg = da9150_reg_read(charger->da9150, DA9150_STATUS_H);
> +
> + if (((reg & DA9150_VBUS_STAT_MASK) == DA9150_VBUS_STAT_OFF) ||
> + ((reg & DA9150_VBUS_STAT_MASK) == DA9150_VBUS_STAT_WAIT)) {
> + val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> +
> + return 0;
> + }
> +
> + reg = da9150_reg_read(charger->da9150, DA9150_STATUS_J);
> +
> + /* Now check for other states */
> + switch (reg & DA9150_CHG_STAT_MASK) {
> + case DA9150_CHG_STAT_ACT:
> + case DA9150_CHG_STAT_PRE:
> + case DA9150_CHG_STAT_CC:
> + case DA9150_CHG_STAT_CV:
> + val->intval = POWER_SUPPLY_STATUS_CHARGING;
> + break;
> + case DA9150_CHG_STAT_OFF:
> + case DA9150_CHG_STAT_SUSP:
> + case DA9150_CHG_STAT_TEMP:
> + case DA9150_CHG_STAT_TIME:
> + case DA9150_CHG_STAT_BAT:
> + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> + break;
> + case DA9150_CHG_STAT_FULL:
> + val->intval = POWER_SUPPLY_STATUS_FULL;
> + break;
> + default:
> + val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static int da9150_charger_battery_health(struct da9150_charger *charger,
> + union power_supply_propval *val)
> +{
> + u8 reg;
> +
> + reg = da9150_reg_read(charger->da9150, DA9150_STATUS_J);
> +
> + /* Check if temperature limit reached */
> + switch (reg & DA9150_CHG_TEMP_MASK) {
> + case DA9150_CHG_TEMP_UNDER:
> + val->intval = POWER_SUPPLY_HEALTH_COLD;
> + return 0;
> + case DA9150_CHG_TEMP_OVER:
> + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
> + return 0;
> + default:
> + break;
> + }
> +
> + /* Check for other health states */
> + switch (reg & DA9150_CHG_STAT_MASK) {
> + case DA9150_CHG_STAT_ACT:
> + case DA9150_CHG_STAT_PRE:
> + val->intval = POWER_SUPPLY_HEALTH_DEAD;
> + break;
> + case DA9150_CHG_STAT_TIME:
> + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
> + break;
> + default:
> + val->intval = POWER_SUPPLY_HEALTH_GOOD;
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static int da9150_charger_battery_present(struct da9150_charger *charger,
> + union power_supply_propval *val)
> +{
> + u8 reg;
> +
> + /* Check if battery present or removed */
> + reg = da9150_reg_read(charger->da9150, DA9150_STATUS_J);
> + if ((reg & DA9150_CHG_STAT_MASK) == DA9150_CHG_STAT_BAT)
> + val->intval = 0;
> + else
> + val->intval = 1;
> +
> + return 0;
> +}
> +
> +static int da9150_charger_battery_charge_type(struct da9150_charger *charger,
> + union power_supply_propval *val)
> +{
> + u8 reg;
> +
> + reg = da9150_reg_read(charger->da9150, DA9150_STATUS_J);
> +
> + switch (reg & DA9150_CHG_STAT_MASK) {
> + case DA9150_CHG_STAT_CC:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
> + break;
> + case DA9150_CHG_STAT_ACT:
> + case DA9150_CHG_STAT_PRE:
> + case DA9150_CHG_STAT_CV:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> + break;
> + default:
> + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static int da9150_charger_battery_voltage_min(struct da9150_charger *charger,
> + union power_supply_propval *val)
> +{
> + u8 reg;
> +
> + reg = da9150_reg_read(charger->da9150, DA9150_PPR_CHGCTRL_C);
> +
> + /* Value starts at 2500 mV, 50 mV increments, presented in uV */
> + val->intval = ((reg & DA9150_CHG_VFAULT_MASK) * 50000) + 2500000;
> +
> + return 0;
> +}
> +
> +static int da9150_charger_battery_voltage_now(struct da9150_charger *charger,
> + union power_supply_propval *val)
> +{
> + int v_val, ret;
> +
> + /* Read processed value - mV units */
> + ret = iio_read_channel_processed(charger->vbat_chan, &v_val);
> + if (ret < 0)
> + return ret;
> +
> + val->intval = v_val * 1000;
> +
> + return 0;
> +}
> +
> +static int da9150_charger_battery_current_max(struct da9150_charger *charger,
> + union power_supply_propval *val)
> +{
> + int reg;
> +
> + reg = da9150_reg_read(charger->da9150, DA9150_PPR_CHGCTRL_D);
> +
> + /* 25mA increments */
> + val->intval = reg * 25000;
> +
> + return 0;
> +}
> +
> +static int da9150_charger_battery_voltage_max(struct da9150_charger *charger,
> + union power_supply_propval *val)
> +{
> + u8 reg;
> +
> + reg = da9150_reg_read(charger->da9150, DA9150_PPR_CHGCTRL_B);
> +
> + /* Value starts at 3650 mV, 25 mV increments, presented in uV */
> + val->intval = ((reg & DA9150_CHG_VBAT_MASK) * 25000) + 3650000;
> + return 0;
> +}
> +
> +static enum power_supply_property da9150_charger_bat_props[] = {
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_HEALTH,
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_CHARGE_TYPE,
> + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
> + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
> +};
> +
> +static int da9150_charger_battery_get_prop(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct da9150_charger *charger = dev_get_drvdata(psy->dev->parent);
> + int ret;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_STATUS:
> + ret = da9150_charger_battery_status(charger, val);
> + break;
> + case POWER_SUPPLY_PROP_ONLINE:
> + ret = da9150_charger_supply_online(charger, psy, val);
> + break;
> + case POWER_SUPPLY_PROP_HEALTH:
> + ret = da9150_charger_battery_health(charger, val);
> + break;
> + case POWER_SUPPLY_PROP_PRESENT:
> + ret = da9150_charger_battery_present(charger, val);
> + break;
> + case POWER_SUPPLY_PROP_CHARGE_TYPE:
> + ret = da9150_charger_battery_charge_type(charger, val);
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> + ret = da9150_charger_battery_voltage_min(charger, val);
> + break;
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + ret = da9150_charger_battery_voltage_now(charger, val);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> + ret = da9150_charger_battery_current_max(charger, val);
> + break;
> + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> + ret = da9150_charger_battery_voltage_max(charger, val);
> + break;
> + default:
> + ret = -EINVAL;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static irqreturn_t da9150_charger_chg_irq(int irq, void *data)
> +{
> + struct da9150_charger *charger = data;
> +
> + power_supply_changed(&charger->battery);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t da9150_charger_tjunc_irq(int irq, void *data)
> +{
> + struct da9150_charger *charger = data;
> +
> + /* Nothing we can really do except report this. */
> + dev_crit(charger->dev, "TJunc over temperature!!!\n");
> + power_supply_changed(&charger->usb);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t da9150_charger_vfault_irq(int irq, void *data)
> +{
> + struct da9150_charger *charger = data;
> +
> + /* Nothing we can really do except report this. */
> + dev_crit(charger->dev, "VSYS under voltage!!!\n");
> + power_supply_changed(&charger->usb);
> + power_supply_changed(&charger->battery);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t da9150_charger_vbus_irq(int irq, void *data)
> +{
> + struct da9150_charger *charger = data;
> + u8 reg;
> +
> + reg = da9150_reg_read(charger->da9150, DA9150_STATUS_H);
> +
> + /* Charger plugged in or battery only */
> + switch (reg & DA9150_VBUS_STAT_MASK) {
> + case DA9150_VBUS_STAT_OFF:
> + case DA9150_VBUS_STAT_WAIT:
> + charger->supply_online = &charger->battery;
> + break;
> + case DA9150_VBUS_STAT_CHG:
> + charger->supply_online = &charger->usb;
> + break;
> + default:
> + dev_warn(charger->dev, "Unknown VBUS state - reg = 0x%x\n",
> + reg);
> + charger->supply_online = NULL;
> + break;
> + }
> +
> + power_supply_changed(&charger->usb);
> + power_supply_changed(&charger->battery);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void da9150_charger_otg_work(struct work_struct *data)
> +{
> + struct da9150_charger *charger =
> + container_of(data, struct da9150_charger, otg_work);
> +
> + switch (charger->usb_event) {
> + case USB_EVENT_ID:
> + /* Enable OTG Boost */
> + da9150_set_bits(charger->da9150, DA9150_PPR_BKCTRL_A,
> + DA9150_VBUS_MODE_MASK, DA9150_VBUS_MODE_OTG);
> + break;
> + case USB_EVENT_NONE:
> + /* Revert to charge mode */
> + power_supply_changed(&charger->usb);
> + power_supply_changed(&charger->battery);
> + da9150_set_bits(charger->da9150, DA9150_PPR_BKCTRL_A,
> + DA9150_VBUS_MODE_MASK, DA9150_VBUS_MODE_CHG);
> + break;
> + }
> +}
> +
> +static int da9150_charger_otg_ncb(struct notifier_block *nb, unsigned long val,
> + void *priv)
> +{
> + struct da9150_charger *charger =
> + container_of(nb, struct da9150_charger, otg_nb);
> +
> + dev_dbg(charger->dev, "DA9150 OTG notify %lu\n", val);
> +
> + charger->usb_event = val;
> + schedule_work(&charger->otg_work);
> +
> + return NOTIFY_OK;
> +}
> +
> +static int da9150_charger_register_irq(struct platform_device *pdev,
> + irq_handler_t handler,
> + const char *irq_name)
> +{
> + struct device *dev = &pdev->dev;
> + struct da9150_charger *charger = platform_get_drvdata(pdev);
> + int irq, ret;
> +
> + irq = platform_get_irq_byname(pdev, irq_name);
> + if (irq < 0) {
> + dev_err(dev, "Failed to get IRQ CHG_STATUS: %d\n", irq);
> + return irq;
> + }
> +
> + ret = devm_request_threaded_irq(dev, irq, NULL, handler, IRQF_ONESHOT,
> + irq_name, charger);
> + if (ret)
> + dev_err(dev, "Failed to request IRQ %d: %d\n", irq, ret);
> +
> + return ret;
> +}
> +
> +static int da9150_charger_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct da9150 *da9150 = dev_get_drvdata(dev->parent);
> + struct da9150_charger *charger;
> + struct power_supply *usb, *battery;
> + u8 reg;
> + int ret;
> +
> + charger = devm_kzalloc(dev, sizeof(struct da9150_charger), GFP_KERNEL);
> + if (charger == NULL)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, charger);
> + charger->da9150 = da9150;
> + charger->dev = dev;
> +
> + /* Acquire ADC channels */
> + charger->ibus_chan = iio_channel_get(dev, "CHAN_IBUS");
> + if (IS_ERR(charger->ibus_chan)) {
> + ret = PTR_ERR(charger->ibus_chan);
> + goto ibus_chan_fail;
> + }
> +
> + charger->vbus_chan = iio_channel_get(dev, "CHAN_VBUS");
> + if (IS_ERR(charger->vbus_chan)) {
> + ret = PTR_ERR(charger->vbus_chan);
> + goto vbus_chan_fail;
> + }
> +
> + charger->tjunc_chan = iio_channel_get(dev, "CHAN_TJUNC");
> + if (IS_ERR(charger->tjunc_chan)) {
> + ret = PTR_ERR(charger->tjunc_chan);
> + goto tjunc_chan_fail;
> + }
> +
> + charger->vbat_chan = iio_channel_get(dev, "CHAN_VBAT");
> + if (IS_ERR(charger->vbat_chan)) {
> + ret = PTR_ERR(charger->vbat_chan);
> + goto vbat_chan_fail;
> + }
> +
> + /* Register power supplies */
> + usb = &charger->usb;
> + battery = &charger->battery;
> +
> + usb->name = "da9150-usb",
> + usb->type = POWER_SUPPLY_TYPE_USB;
> + usb->properties = da9150_charger_props;
> + usb->num_properties = ARRAY_SIZE(da9150_charger_props);
> + usb->get_property = da9150_charger_get_prop;
> + ret = power_supply_register(dev, usb);
> + if (ret)
> + goto usb_fail;
> +
> + battery->name = "da9150-battery";
> + battery->type = POWER_SUPPLY_TYPE_BATTERY;
> + battery->properties = da9150_charger_bat_props;
> + battery->num_properties = ARRAY_SIZE(da9150_charger_bat_props);
> + battery->get_property = da9150_charger_battery_get_prop;
> + ret = power_supply_register(dev, battery);
> + if (ret)
> + goto battery_fail;
> +
> + /* Get initial online supply */
> + reg = da9150_reg_read(da9150, DA9150_STATUS_H);
> +
> + switch (reg & DA9150_VBUS_STAT_MASK) {
> + case DA9150_VBUS_STAT_OFF:
> + case DA9150_VBUS_STAT_WAIT:
> + charger->supply_online = &charger->battery;
> + break;
> + case DA9150_VBUS_STAT_CHG:
> + charger->supply_online = &charger->usb;
> + break;
> + default:
> + dev_warn(dev, "Unknown VBUS state - reg = 0x%x\n", reg);
> + charger->supply_online = NULL;
> + break;
> + }
> +
> + /* Setup OTG reporting & configuration */
> + charger->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
> + if (!IS_ERR_OR_NULL(charger->usb_phy)) {
> + INIT_WORK(&charger->otg_work, da9150_charger_otg_work);
> + charger->otg_nb.notifier_call = da9150_charger_otg_ncb;
> + usb_register_notifier(charger->usb_phy, &charger->otg_nb);
> + }
> +
> + /* Register IRQs */
> + ret = da9150_charger_register_irq(pdev, da9150_charger_chg_irq,
> + "CHG_STATUS");
> + if (ret < 0)
> + goto irq_fail;
> +
> + ret = da9150_charger_register_irq(pdev, da9150_charger_tjunc_irq,
> + "CHG_TJUNC");
> + if (ret < 0)
> + goto irq_fail;
> +
> + ret = da9150_charger_register_irq(pdev, da9150_charger_vfault_irq,
> + "CHG_VFAULT");
> + if (ret < 0)
> + goto irq_fail;
> +
> + ret = da9150_charger_register_irq(pdev, da9150_charger_vbus_irq,
> + "CHG_VBUS");
> + if (ret < 0)
> + goto irq_fail;
> +
> + return 0;
> +
> +irq_fail:
> + if (!IS_ERR_OR_NULL(charger->usb_phy))
> + usb_unregister_notifier(charger->usb_phy, &charger->otg_nb);
> +battery_fail:
> + power_supply_unregister(usb);
> +
> +usb_fail:
> + iio_channel_release(charger->vbat_chan);
> +
> +vbat_chan_fail:
> + iio_channel_release(charger->tjunc_chan);
> +
> +tjunc_chan_fail:
> + iio_channel_release(charger->vbus_chan);
> +
> +vbus_chan_fail:
> + iio_channel_release(charger->ibus_chan);
> +
> +ibus_chan_fail:
> + return ret;
> +}
> +
> +static int da9150_charger_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct da9150_charger *charger = platform_get_drvdata(pdev);
> + int irq;
> +
> + /* Make sure IRQs are released before unregistering power supplies */
> + irq = platform_get_irq_byname(pdev, "CHG_VBUS");
> + devm_free_irq(dev, irq, charger);
> +
> + irq = platform_get_irq_byname(pdev, "CHG_VFAULT");
> + devm_free_irq(dev, irq, charger);
> +
> + irq = platform_get_irq_byname(pdev, "CHG_TJUNC");
> + devm_free_irq(dev, irq, charger);
> +
> + irq = platform_get_irq_byname(pdev, "CHG_STATUS");
> + devm_free_irq(dev, irq, charger);
If you have used a devm allocation, you generally don't need to
free them explicitly. That will happen when the device is freed.

If you do need to free them here (to maintain ordering etc) then you
don't want to be using the devm interfaces in the first place.
> +
> + if (!IS_ERR_OR_NULL(charger->usb_phy))
> + usb_unregister_notifier(charger->usb_phy, &charger->otg_nb);
> +
> + power_supply_unregister(&charger->battery);
> + power_supply_unregister(&charger->usb);
> +
> + /* Release ADC channels */
> + iio_channel_release(charger->ibus_chan);
> + iio_channel_release(charger->vbus_chan);
> + iio_channel_release(charger->tjunc_chan);
> + iio_channel_release(charger->vbat_chan);
> +
> + return 0;
> +}
> +
> +static struct platform_driver da9150_charger_driver = {
> + .driver = {
> + .name = "da9150-charger",
> + },
> + .probe = da9150_charger_probe,
> + .remove = da9150_charger_remove,
> +};
> +
> +module_platform_driver(da9150_charger_driver);
> +
> +MODULE_DESCRIPTION("Charger Driver for DA9150");
> +MODULE_AUTHOR("Adam Thomson <Adam.Thomson.Opensource@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> --
> 1.9.3
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/