Re: [PATCH v4 2/3] PM / devfreq: tegra: add devfreq driver for Tegra Activity Monitor

From: Alexandre Courbot
Date: Fri Dec 12 2014 - 02:45:09 EST


Hi Tomeu,

On Tue, Dec 9, 2014 at 10:15 PM, Tomeu Vizoso
<tomeu.vizoso@xxxxxxxxxxxxx> wrote:
> The ACTMON block can monitor several counters, providing averaging and firing
> interrupts based on watermarking configuration. This implementation monitors
> the MCALL and MCCPU counters to choose an appropriate frequency for the
> external memory clock.
>
> This patch is based on work by Alex Frid <afrid@xxxxxxxxxx> and Mikko
> Perttunen <mikko.perttunen@xxxxxxxx>.
>
> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
>
> ---
>
> v3: * Address misc. style issues found by Thierry and Alexander
> * Added helpers for register i/o
> * Further documented the structs
> * Enable the ACTMON after the IRQ handler has been installed
> * Disable the ACTMON before removing the IRQ handler
> * Add governor in a subsys initcall
> * Rename tegra-devfreq.c to tegra-actmon-devfreq.c
>
> v2: * Use devfreq

This is taking shape, and although it will be desirable to port it to
the more suitable watermark model once it gets merged, I am for
merging this first version in the meantime as it provides a useful
feature. Then we could use it to test-drive watermarking and argue the
advantages of that model with impressive negative line count patches.
;)

A few comments below but I am close to giving my ack to this.

> ---
> drivers/devfreq/Kconfig | 9 +
> drivers/devfreq/Makefile | 1 +
> drivers/devfreq/tegra-actmon-devfreq.c | 777 +++++++++++++++++++++++++++++++++
> 3 files changed, 787 insertions(+)
> create mode 100644 drivers/devfreq/tegra-actmon-devfreq.c
>
> diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
> index faf4e70..76be33a 100644
> --- a/drivers/devfreq/Kconfig
> +++ b/drivers/devfreq/Kconfig
> @@ -87,4 +87,13 @@ config ARM_EXYNOS5_BUS_DEVFREQ
> It reads PPMU counters of memory controllers and adjusts the
> operating frequencies and voltages with OPP support.
>
> +config ARM_TEGRA_ACTMON_DEVFREQ
> + bool "Tegra ACTMON DEVFREQ Driver"
> + depends on ARCH_TEGRA
> + select PM_OPP
> + help
> + This adds the DEVFREQ driver for the Tegra family of SoCs.
> + It reads ACTMON counters of memory controllers and adjusts the
> + operating frequencies and voltages with OPP support.
> +
> endif # PM_DEVFREQ
> diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
> index 16138c9..c9159c5 100644
> --- a/drivers/devfreq/Makefile
> +++ b/drivers/devfreq/Makefile
> @@ -7,3 +7,4 @@ obj-$(CONFIG_DEVFREQ_GOV_USERSPACE) += governor_userspace.o
> # DEVFREQ Drivers
> obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos/
> obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos/
> +obj-$(CONFIG_ARM_TEGRA_ACTMON_DEVFREQ) += tegra-actmon-devfreq.o
> diff --git a/drivers/devfreq/tegra-actmon-devfreq.c b/drivers/devfreq/tegra-actmon-devfreq.c
> new file mode 100644
> index 0000000..8d2ea22f
> --- /dev/null
> +++ b/drivers/devfreq/tegra-actmon-devfreq.c
> @@ -0,0 +1,777 @@
> +/*
> + * A devfreq driver for NVIDIA Tegra SoCs
> + *
> + * Copyright (c) 2014 NVIDIA CORPORATION. All rights reserved.
> + * Copyright (C) 2014 Google, Inc
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/cpufreq.h>
> +#include <linux/devfreq.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_opp.h>
> +#include <linux/reset.h>
> +
> +#include "governor.h"
> +
> +#define ACTMON_GLB_STATUS 0x0
> +#define ACTMON_GLB_PERIOD_CTRL 0x4
> +
> +#define ACTMON_DEV_CTRL 0x0
> +#define ACTMON_DEV_CTRL_K_VAL_SHIFT 10
> +#define ACTMON_DEV_CTRL_ENB_PERIODIC BIT(18)
> +#define ACTMON_DEV_CTRL_AVG_BELOW_WMARK_EN BIT(20)
> +#define ACTMON_DEV_CTRL_AVG_ABOVE_WMARK_EN BIT(21)
> +#define ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_NUM_SHIFT 23
> +#define ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_NUM_SHIFT 26
> +#define ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN BIT(29)
> +#define ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_EN BIT(30)
> +#define ACTMON_DEV_CTRL_ENB BIT(31)
> +
> +#define ACTMON_DEV_UPPER_WMARK 0x4
> +#define ACTMON_DEV_LOWER_WMARK 0x8
> +#define ACTMON_DEV_INIT_AVG 0xc
> +#define ACTMON_DEV_AVG_UPPER_WMARK 0x10
> +#define ACTMON_DEV_AVG_LOWER_WMARK 0x14
> +#define ACTMON_DEV_COUNT_WEIGHT 0x18
> +#define ACTMON_DEV_AVG_COUNT 0x20
> +#define ACTMON_DEV_INTR_STATUS 0x24
> +
> +#define ACTMON_INTR_STATUS_CLEAR 0xffffffff
> +
> +#define ACTMON_DEV_INTR_CONSECUTIVE_UPPER BIT(31)
> +#define ACTMON_DEV_INTR_CONSECUTIVE_LOWER BIT(30)
> +
> +#define ACTMON_ABOVE_WMARK_WINDOW 1
> +#define ACTMON_BELOW_WMARK_WINDOW 3
> +#define ACTMON_BOOST_FREQ_STEP 16000
> +
> +/*
> + * Activity counter is incremented every 256 memory transactions, and each
> + * transaction takes 4 EMC clocks for Tegra124; So the COUNT_WEIGHT is
> + * 4 * 256 = 1024.
> + */
> +#define ACTMON_COUNT_WEIGHT 0x400
> +
> +/*
> + * ACTMON_AVERAGE_WINDOW_LOG2: default value for @DEV_CTRL_K_VAL, which
> + * translates to 2 ^ (K_VAL + 1). ex: 2 ^ (6 + 1) = 128
> + */
> +#define ACTMON_AVERAGE_WINDOW_LOG2 6
> +#define ACTMON_SAMPLING_PERIOD 12 /* ms */
> +#define ACTMON_DEFAULT_AVG_BAND 6 /* 1/10 of % */
> +
> +#define KHZ 1000
> +
> +/* Assume that the bus is saturated if the utilization is 25% */
> +#define BUS_SATURATION_RATIO 25
> +
> +/**
> + * struct tegra_devfreq_device_config - configuration specific to an ACTMON
> + * device
> + *
> + * Coefficients and thresholds are in %
> + */
> +struct tegra_devfreq_device_config {
> + u32 offset;
> + u32 irq_mask;
> +
> + /* Factors applied to boost_freq every consecutive watermark breach */
> + unsigned int boost_up_coeff;
> + unsigned int boost_down_coeff;
> +
> + /* Define the watermark bounds when applied to the current avg */
> + unsigned int boost_up_threshold;
> + unsigned int boost_down_threshold;
> +
> + /*
> + * Threshold of activity below which the CPU frequency isn't to be
> + * taken into account. This is to avoid increasing the EMC frequency
> + * when the CPU is very busy but not accessing the bus often.
> + */
> + u32 avg_dependency_threshold;
> +};
> +
> +enum tegra_actmon_device {
> + MCALL = 0,
> + MCCPU,
> +};
> +
> +static struct tegra_devfreq_device_config actmon_device_configs[] = {
> + {
> + /* MCALL: All memory accesses (including from the CPUs) */
> + .offset = 0x1c0,
> + .irq_mask = 1 << 26,
> + .boost_up_coeff = 200,
> + .boost_down_coeff = 50,
> + .boost_up_threshold = 60,
> + .boost_down_threshold = 40,
> + },
> + {
> + /* MCCPU: memory accesses from the CPUs */
> + .offset = 0x200,
> + .irq_mask = 1 << 25,
> + .boost_up_coeff = 800,
> + .boost_down_coeff = 90,
> + .boost_up_threshold = 27,
> + .boost_down_threshold = 10,
> + .avg_dependency_threshold = 50000,

The comment above says that coefficients and thresholds are in % - but
does it apply to avg_dependency_threshold? The number looks like it is
something else.

> + },
> +};
> +
> +/**
> + * struct tegra_devfreq_device - state specific to an ACTMON device
> + *
> + * Frequencies are in kHz.
> + */
> +struct tegra_devfreq_device {
> + const struct tegra_devfreq_device_config *config;
> +
> + void __iomem *regs;
> +
> + /* Average event count sampled in the last interrupt */
> + u32 avg_count;
> +
> + /*
> + * Extra frequency to increase the target by due to consecutive
> + * watermark breaches.
> + */
> + unsigned long boost_freq;
> +
> + /* Optimal frequency calculated from the stats for this device */
> + unsigned long target_freq;
> +};
> +
> +struct tegra_devfreq {
> + struct devfreq *devfreq;
> +
> + struct platform_device *pdev;

It seems like pdev is not used anywhere in this file.

> + struct reset_control *reset;
> + struct clk *clock;
> + void __iomem *regs;
> +
> + spinlock_t lock;
> +
> + struct clk *emc_clock;
> + unsigned long max_freq;
> + unsigned long cur_freq;
> + struct notifier_block rate_change_nb;
> +
> + struct tegra_devfreq_device devices[ARRAY_SIZE(actmon_device_configs)];
> +};
> +
> +struct tegra_actmon_emc_ratio {
> + unsigned long cpu_freq;
> + unsigned long emc_freq;
> +};
> +
> +static struct tegra_actmon_emc_ratio actmon_emc_ratios[] = {
> + { 1400000, ULONG_MAX },
> + { 1200000, 750000 },
> + { 1100000, 600000 },
> + { 1000000, 500000 },
> + { 800000, 375000 },
> + { 500000, 200000 },
> + { 250000, 100000 },
> +};
> +
> +static u32 actmon_readl(struct tegra_devfreq *tegra, u32 offset)
> +{
> + return readl(tegra->regs + offset);
> +}
> +
> +static void actmon_writel(struct tegra_devfreq *tegra, u32 val, u32 offset)
> +{
> + writel(val, tegra->regs + offset);
> +}
> +
> +static u32 device_readl(struct tegra_devfreq_device *dev, u32 offset)
> +{
> + return readl(dev->regs + offset);
> +}
> +
> +static void device_writel(struct tegra_devfreq_device *dev, u32 val,
> + u32 offset)
> +{
> + writel(val, dev->regs + offset);
> +}
> +
> +static unsigned long do_percent(unsigned long val, unsigned int pct)
> +{
> + return val * pct / 100;
> +}
> +
> +static void tegra_devfreq_update_avg_wmark(struct tegra_devfreq *tegra,
> + struct tegra_devfreq_device *dev)
> +{
> + u32 avg = dev->avg_count;
> + u32 avg_band_freq = tegra->max_freq * ACTMON_DEFAULT_AVG_BAND / KHZ;
> + u32 band = avg_band_freq * ACTMON_SAMPLING_PERIOD;
> +
> + device_writel(dev, avg + band, ACTMON_DEV_AVG_UPPER_WMARK);
> +
> + avg = max(dev->avg_count, band);
> + device_writel(dev, avg - band, ACTMON_DEV_AVG_LOWER_WMARK);
> +}
> +
> +static void tegra_devfreq_update_wmark(struct tegra_devfreq *tegra,
> + struct tegra_devfreq_device *dev)
> +{
> + u32 val = tegra->cur_freq * ACTMON_SAMPLING_PERIOD;
> +
> + device_writel(dev, do_percent(val, dev->config->boost_up_threshold),
> + ACTMON_DEV_UPPER_WMARK);
> +
> + device_writel(dev, do_percent(val, dev->config->boost_down_threshold),
> + ACTMON_DEV_LOWER_WMARK);
> +}
> +
> +static void actmon_write_barrier(struct tegra_devfreq *tegra)
> +{
> + /* ensure the update has reached the ACTMON */
> + wmb();
> + actmon_readl(tegra, ACTMON_GLB_STATUS);
> +}
> +
> +static irqreturn_t actmon_isr(int irq, void *data)
> +{
> + struct tegra_devfreq *tegra = data;
> + struct tegra_devfreq_device *dev = NULL;
> + unsigned long flags;
> + u32 val, intr_status, dev_ctrl;
> + unsigned int i;
> +
> + val = actmon_readl(tegra, ACTMON_GLB_STATUS);
> +
> + for (i = 0; i < ARRAY_SIZE(tegra->devices); i++) {
> + if (val & tegra->devices[i].config->irq_mask) {
> + dev = tegra->devices + i;
> + break;
> + }
> + }

Just to be sure: could it happen that we have several IRQ bits set for
a single interrupt? If so, it seems like the current code is not
designed to handle this.

> +
> + if (!dev)
> + return IRQ_NONE;
> +
> + spin_lock_irqsave(&tegra->lock, flags);
> +
> + dev->avg_count = device_readl(dev, ACTMON_DEV_AVG_COUNT);
> + tegra_devfreq_update_avg_wmark(tegra, dev);
> +
> + intr_status = device_readl(dev, ACTMON_DEV_INTR_STATUS);
> + dev_ctrl = device_readl(dev, ACTMON_DEV_CTRL);
> +
> + if (intr_status & ACTMON_DEV_INTR_CONSECUTIVE_UPPER) {
> + /*
> + * new_boost = min(old_boost * up_coef + step, max_freq)
> + */
> + dev->boost_freq = do_percent(dev->boost_freq,
> + dev->config->boost_up_coeff);
> + dev->boost_freq += ACTMON_BOOST_FREQ_STEP;
> +
> + dev_ctrl |= ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
> +
> + if (dev->boost_freq >= tegra->max_freq)
> + dev->boost_freq = tegra->max_freq;
> + else
> + dev_ctrl |= ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_EN;
> + } else if (intr_status & ACTMON_DEV_INTR_CONSECUTIVE_LOWER) {
> + /*
> + * new_boost = old_boost * down_coef
> + * or 0 if (old_boost * down_coef < step / 2)
> + */
> + dev->boost_freq = do_percent(dev->boost_freq,
> + dev->config->boost_down_coeff);
> +
> + dev_ctrl |= ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_EN;
> +
> + if (dev->boost_freq < (ACTMON_BOOST_FREQ_STEP >> 1))
> + dev->boost_freq = 0;
> + else
> + dev_ctrl |= ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
> + }
> +
> + if (dev->config->avg_dependency_threshold) {
> + if (dev->avg_count >= dev->config->avg_dependency_threshold)
> + dev_ctrl |= ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
> + else if (dev->boost_freq == 0)
> + dev_ctrl &= ~ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN;
> + }
> +
> + device_writel(dev, dev_ctrl, ACTMON_DEV_CTRL);
> +
> + device_writel(dev, ACTMON_INTR_STATUS_CLEAR, ACTMON_DEV_INTR_STATUS);
> +
> + actmon_write_barrier(tegra);
> +
> + spin_unlock_irqrestore(&tegra->lock, flags);
> +
> + return IRQ_WAKE_THREAD;
> +}
> +
> +static unsigned long actmon_cpu_to_emc_rate(struct tegra_devfreq *tegra,
> + unsigned long cpu_freq)
> +{
> + unsigned int i;
> + struct tegra_actmon_emc_ratio *ratio = actmon_emc_ratios;
> +
> + for (i = 0; i < ARRAY_SIZE(actmon_emc_ratios); i++, ratio++) {
> + if (cpu_freq >= ratio->cpu_freq) {
> + if (ratio->emc_freq >= tegra->max_freq)
> + return tegra->max_freq;
> + else
> + return ratio->emc_freq;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void actmon_update_target(struct tegra_devfreq *tegra,
> + struct tegra_devfreq_device *dev)
> +{
> + unsigned long cpu_freq = 0;
> + unsigned long static_cpu_emc_freq = 0;
> + unsigned int avg_sustain_coef;
> + unsigned long flags;
> +
> + if (dev->config->avg_dependency_threshold) {
> + cpu_freq = cpufreq_get(0);
> + static_cpu_emc_freq = actmon_cpu_to_emc_rate(tegra, cpu_freq);
> + }
> +
> + spin_lock_irqsave(&tegra->lock, flags);
> +
> + dev->target_freq = dev->avg_count / ACTMON_SAMPLING_PERIOD;
> + avg_sustain_coef = 100 * 100 / dev->config->boost_up_threshold;
> + dev->target_freq = do_percent(dev->target_freq, avg_sustain_coef);
> + dev->target_freq += dev->boost_freq;
> +
> + if (dev->avg_count >= dev->config->avg_dependency_threshold)
> + dev->target_freq = max(dev->target_freq, static_cpu_emc_freq);
> +
> + spin_unlock_irqrestore(&tegra->lock, flags);
> +}
> +
> +static irqreturn_t actmon_thread_isr(int irq, void *data)
> +{
> + struct tegra_devfreq *tegra = data;
> +
> + mutex_lock(&tegra->devfreq->lock);
> + update_devfreq(tegra->devfreq);
> + mutex_unlock(&tegra->devfreq->lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int tegra_actmon_rate_notify_cb(struct notifier_block *nb,
> + unsigned long action, void *ptr)
> +{
> + struct clk_notifier_data *data = ptr;
> + struct tegra_devfreq *tegra;
> + unsigned int i;
> + unsigned long flags;
> +
> + if (action != POST_RATE_CHANGE)
> + return NOTIFY_OK;
> +
> + tegra = container_of(nb, struct tegra_devfreq, rate_change_nb);
> +
> + spin_lock_irqsave(&tegra->lock, flags);
> +
> + tegra->cur_freq = data->new_rate / KHZ;
> +
> + for (i = 0; i < ARRAY_SIZE(tegra->devices); i++)
> + tegra_devfreq_update_wmark(tegra, tegra->devices + i);
> +
> + actmon_write_barrier(tegra);
> +
> + spin_unlock_irqrestore(&tegra->lock, flags);
> +
> + return NOTIFY_OK;
> +}
> +
> +static void tegra_actmon_configure_device(struct tegra_devfreq *tegra,
> + struct tegra_devfreq_device *dev)
> +{
> + u32 val = 0;
> +
> + dev->target_freq = tegra->cur_freq;
> +
> + dev->avg_count = tegra->cur_freq * ACTMON_SAMPLING_PERIOD;
> + device_writel(dev, dev->avg_count, ACTMON_DEV_INIT_AVG);
> +
> + tegra_devfreq_update_avg_wmark(tegra, dev);
> + tegra_devfreq_update_wmark(tegra, dev);
> +
> + device_writel(dev, ACTMON_COUNT_WEIGHT, ACTMON_DEV_COUNT_WEIGHT);
> + device_writel(dev, ACTMON_INTR_STATUS_CLEAR, ACTMON_DEV_INTR_STATUS);
> +
> + val |= ACTMON_DEV_CTRL_ENB_PERIODIC |
> + ACTMON_DEV_CTRL_AVG_ABOVE_WMARK_EN |
> + ACTMON_DEV_CTRL_AVG_BELOW_WMARK_EN;
> + val |= (ACTMON_AVERAGE_WINDOW_LOG2 - 1)
> + << ACTMON_DEV_CTRL_K_VAL_SHIFT;
> + val |= (ACTMON_BELOW_WMARK_WINDOW - 1)
> + << ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_NUM_SHIFT;
> + val |= (ACTMON_ABOVE_WMARK_WINDOW - 1)
> + << ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_NUM_SHIFT;
> + val |= ACTMON_DEV_CTRL_CONSECUTIVE_BELOW_WMARK_EN |
> + ACTMON_DEV_CTRL_CONSECUTIVE_ABOVE_WMARK_EN;
> +
> + device_writel(dev, val, ACTMON_DEV_CTRL);
> +
> + actmon_write_barrier(tegra);
> +}
> +
> +static void tegra_actmon_enable_device(struct tegra_devfreq *tegra,
> + struct tegra_devfreq_device *dev)
> +{
> + u32 val;
> +
> + val = device_readl(dev, ACTMON_DEV_CTRL);
> + val |= ACTMON_DEV_CTRL_ENB;
> + device_writel(dev, val, ACTMON_DEV_CTRL);
> +
> + actmon_write_barrier(tegra);
> +}
> +
> +static void tegra_actmon_disable_device(struct tegra_devfreq *tegra,
> + struct tegra_devfreq_device *dev)
> +{
> + u32 val;
> +
> + val = device_readl(dev, ACTMON_DEV_CTRL);
> + val &= ~ACTMON_DEV_CTRL_ENB;
> + device_writel(dev, val, ACTMON_DEV_CTRL);
> +
> + actmon_write_barrier(tegra);
> +}
> +
> +static int tegra_devfreq_target(struct device *dev, unsigned long *freq,
> + u32 flags)
> +{
> + struct platform_device *pdev;
> + struct tegra_devfreq *tegra = dev_get_drvdata(dev);
> + struct dev_pm_opp *opp;
> + unsigned long rate = *freq * KHZ;
> +
> + pdev = container_of(dev, struct platform_device, dev);
> +
> + rcu_read_lock();
> + opp = devfreq_recommended_opp(dev, &rate, flags);
> + if (IS_ERR(opp)) {
> + rcu_read_unlock();
> + dev_err(dev, "Failed to find opp for %lu KHz\n", *freq);
> + return PTR_ERR(opp);
> + }
> + rate = dev_pm_opp_get_freq(opp);
> + rcu_read_unlock();
> +
> + /* TODO: Once we have per-user clk constraints, set a floor */
> + clk_set_rate(tegra->emc_clock, rate);
> +
> + /* TODO: Set voltage as well */
> +
> + return 0;
> +}
> +
> +static int tegra_devfreq_get_dev_status(struct device *dev,
> + struct devfreq_dev_status *stat)
> +{
> + struct platform_device *pdev;
> + struct tegra_devfreq *tegra = dev_get_drvdata(dev);
> + struct tegra_devfreq_device *actmon_dev;
> +
> + pdev = container_of(dev, struct platform_device, dev);
> +
> + stat->current_frequency = tegra->cur_freq;
> +
> + /* To be used by the tegra governor */
> + stat->private_data = tegra;
> +
> + /* The below are to be used by the other governors */
> +
> + actmon_dev = &tegra->devices[MCALL];
> +
> + /* Number of cycles spent on memory access */
> + stat->busy_time = actmon_dev->avg_count;
> +
> + /* The bus can be considered to be saturated way before 100% */
> + stat->busy_time *= 100 / BUS_SATURATION_RATIO;
> +
> + /* Number of cycles in a sampling period */
> + stat->total_time = ACTMON_SAMPLING_PERIOD * tegra->cur_freq;
> +
> + return 0;
> +}
> +
> +static struct devfreq_dev_profile tegra_devfreq_profile = {
> + .polling_ms = 0,
> + .target = tegra_devfreq_target,
> + .get_dev_status = tegra_devfreq_get_dev_status,
> +};
> +
> +static int tegra_governor_get_target(struct devfreq *devfreq,
> + unsigned long *freq)
> +{
> + struct devfreq_dev_status stat;
> + struct tegra_devfreq *tegra;
> + struct tegra_devfreq_device *dev;
> + unsigned long target_freq = 0;
> + unsigned int i;
> + int err;
> +
> + err = devfreq->profile->get_dev_status(devfreq->dev.parent, &stat);
> + if (err)
> + return err;
> +
> + tegra = stat.private_data;
> +
> + for (i = 0; i < ARRAY_SIZE(tegra->devices); i++) {
> + dev = &tegra->devices[i];
> +
> + actmon_update_target(tegra, dev);
> +
> + target_freq = max(target_freq, dev->target_freq);
> + }
> +
> + *freq = target_freq;
> +
> + return 0;
> +}
> +
> +static int tegra_governor_event_handler(struct devfreq *devfreq,
> + unsigned int event, void *data)
> +{
> + return 0;
> +}

>From my v2 review, I don't think you replied to this point:

I think you will need an implementation of this.
DEVFREQ_GOV_START/DEVFREQ_GOV_RESUME, enable actmon interrupts. On
DEVFREQ_GOV_STOP/DEVFREQ_GOV_SUSPEND, disable interrupts. I know you
are doing it somewhere, but it should be done here as this is what
devfreq expects (e.g. to correctly stop interrupts if you switch from
the "tegra" to the "performance" governor).

Your suspend/resume callbacks can then call
devfreq_suspend_device()/devfreq_resume_device().

Or maybe you are keeping it this way to avoid having to store the
devfreq_device in the governor. That's something I can understand, but
I'm afraid it may cause issues when switching governors. Granted, the
possibility of this happening is very small, but there is also the
fact that we don't need/want the watermark interrupts to be fired if
we are using a polling or fixed governor such as "performance". This
will certainly result in an interrupt storm of some sort.

But looking at it twice it seems like avg_count will never be updated
unless the interrupts are fired, so maybe we should update that
counter from some other place, like tegra_devfreq_get_dev_status? Does
that sound feasible?

> +
> +static struct devfreq_governor tegra_devfreq_governor = {
> + .name = "tegra_actmon",
> + .get_target_freq = tegra_governor_get_target,
> + .event_handler = tegra_governor_event_handler,
> +};
> +
> +static int __init tegra_governor_init(void)
> +{
> + return devfreq_add_governor(&tegra_devfreq_governor);
> +}
> +subsys_initcall(tegra_governor_init);
> +
> +static int tegra_devfreq_probe(struct platform_device *pdev)
> +{
> + struct tegra_devfreq *tegra;
> + struct tegra_devfreq_device *dev;
> + struct resource *res;
> + unsigned long max_freq;
> + unsigned int i;
> + int irq;
> + int err;
> +
> + tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
> + if (!tegra)
> + return -ENOMEM;
> +
> + spin_lock_init(&tegra->lock);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> + tegra->regs = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(tegra->regs))
> + return PTR_ERR(tegra->regs);
> +
> + tegra->reset = devm_reset_control_get(&pdev->dev, "actmon");
> + if (IS_ERR(tegra->reset)) {
> + dev_err(&pdev->dev, "Failed to get reset\n");
> + return PTR_ERR(tegra->reset);
> + }
> +
> + tegra->clock = devm_clk_get(&pdev->dev, "actmon");
> + if (IS_ERR(tegra->clock)) {
> + dev_err(&pdev->dev, "Failed to get actmon clock\n");
> + return PTR_ERR(tegra->clock);
> + }
> +
> + tegra->emc_clock = devm_clk_get(&pdev->dev, "emc");
> + if (IS_ERR(tegra->emc_clock)) {
> + dev_err(&pdev->dev, "Failed to get emc clock\n");
> + return PTR_ERR(tegra->emc_clock);
> + }
> +
> + err = of_init_opp_table(&pdev->dev);
> + if (err) {
> + dev_err(&pdev->dev, "Failed to init operating point table\n");
> + return err;
> + }
> +
> + tegra->rate_change_nb.notifier_call = tegra_actmon_rate_notify_cb;
> + err = clk_notifier_register(tegra->emc_clock, &tegra->rate_change_nb);
> + if (err) {
> + dev_err(&pdev->dev,
> + "Failed to register rate change notifier\n");
> + return err;
> + }
> +
> + reset_control_assert(tegra->reset);
> +
> + err = clk_prepare_enable(tegra->clock);
> + if (err) {
> + dev_err(&pdev->dev,
> + "Failed to prepare and enable ACTMON clock\n");
> + return err;
> + }
> +
> + reset_control_deassert(tegra->reset);
> +
> + max_freq = clk_round_rate(tegra->emc_clock, ULONG_MAX);
> + tegra->max_freq = max_freq / KHZ;
> +
> + clk_set_rate(tegra->emc_clock, max_freq);
> +
> + tegra->cur_freq = clk_get_rate(tegra->emc_clock) / KHZ;
> +
> + actmon_writel(tegra, ACTMON_SAMPLING_PERIOD - 1,
> + ACTMON_GLB_PERIOD_CTRL);
> +
> + for (i = 0; i < ARRAY_SIZE(actmon_device_configs); i++) {
> + dev = tegra->devices + i;
> + dev->config = actmon_device_configs + i;
> + dev->regs = tegra->regs + dev->config->offset;
> +
> + tegra_actmon_configure_device(tegra, dev);
> + }
> +
> + tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock);
> + tegra->devfreq = devm_devfreq_add_device(&pdev->dev,
> + &tegra_devfreq_profile,
> + "tegra_actmon",
> + NULL);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq <= 0) {
> + dev_err(&pdev->dev, "Failed to get IRQ\n");
> + return -ENODEV;
> + }
> +
> + platform_set_drvdata(pdev, tegra);
> +
> + err = devm_request_threaded_irq(&pdev->dev, irq, actmon_isr,
> + actmon_thread_isr, IRQF_SHARED,
> + "tegra-devfreq", tegra);
> + if (err) {
> + dev_err(&pdev->dev, "Interrupt request failed\n");
> + return err;
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(actmon_device_configs); i++)
> + tegra_actmon_enable_device(tegra, tegra->devices + i);
> +
> + return 0;
> +}
> +
> +static int tegra_devfreq_remove(struct platform_device *pdev)
> +{
> + struct tegra_devfreq *tegra = platform_get_drvdata(pdev);
> + int irq = platform_get_irq(pdev, 0);
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(actmon_device_configs); i++)
> + tegra_actmon_disable_device(tegra, tegra->devices + i);
> +
> + devm_free_irq(&pdev->dev, irq, tegra);
> +
> + clk_notifier_unregister(tegra->emc_clock, &tegra->rate_change_nb);
> +
> + clk_disable_unprepare(tegra->clock);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +
> +static int tegra_devfreq_suspend(struct device *dev)
> +{
> + struct platform_device *pdev;
> + struct tegra_devfreq *tegra = dev_get_drvdata(dev);
> + struct tegra_devfreq_device *actmon_dev;
> + unsigned int i;
> +
> + pdev = container_of(dev, struct platform_device, dev);
> +
> + for (i = 0; i < ARRAY_SIZE(tegra->devices); i++) {
> + actmon_dev = &tegra->devices[i];
> +
> + tegra_actmon_disable_device(tegra, actmon_dev);
> +
> + device_writel(actmon_dev, ACTMON_INTR_STATUS_CLEAR,
> + ACTMON_DEV_INTR_STATUS);
> +
> + actmon_write_barrier(tegra);
> + }
> +
> + return 0;
> +}
> +
> +static int tegra_devfreq_resume(struct device *dev)
> +{
> + struct platform_device *pdev;
> + struct tegra_devfreq *tegra = dev_get_drvdata(dev);
> + struct tegra_devfreq_device *actmon_dev;
> + unsigned int i;
> +
> + pdev = container_of(dev, struct platform_device, dev);
> +
> + for (i = 0; i < ARRAY_SIZE(tegra->devices); i++) {
> + actmon_dev = &tegra->devices[i];
> +
> + tegra_actmon_configure_device(tegra, actmon_dev);
> + tegra_actmon_enable_device(tegra, actmon_dev);
> + }
> +
> + return 0;
> +}
> +
> +#endif /* CONFIG_PM_SLEEP */
> +
> +static SIMPLE_DEV_PM_OPS(tegra_devfreq_pm_ops,
> + tegra_devfreq_suspend,
> + tegra_devfreq_resume);
> +
> +static struct of_device_id tegra_devfreq_of_match[] = {
> + { .compatible = "nvidia,tegra124-actmon" },
> + { },
> +};
> +
> +MODULE_DEVICE_TABLE(of, tegra_devfreq_of_match);
> +
> +static struct platform_driver tegra_devfreq_driver = {
> + .probe = tegra_devfreq_probe,
> + .remove = tegra_devfreq_remove,
> + .driver = {
> + .name = "tegra-devfreq",
> + .of_match_table = tegra_devfreq_of_match,
> + .pm = &tegra_devfreq_pm_ops,
> + },
> +};
> +module_platform_driver(tegra_devfreq_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Tegra devfreq driver");
> +MODULE_AUTHOR("Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>");
> --
> 1.9.3
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/