[PATCH v2 1/2] mfd: dt-bindings: add the description about dvs gpio for rk808

From: Chris Zhong
Date: Wed Dec 10 2014 - 22:17:10 EST


add the description about dvs1, dvs2, dvsok, and add the example.

Signed-off-by: Chris Zhong <zyw@xxxxxxxxxxxxxx>

---

Changes in v2:
- increase description about dvs pins

Documentation/devicetree/bindings/mfd/rk808.txt | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
index 9e6e259..923cdca 100644
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -24,6 +24,14 @@ Optional properties:
- vcc10-supply: The input supply for LDO_REG6
- vcc11-supply: The input supply for LDO_REG8
- vcc12-supply: The input supply for SWITCH_REG2
+- dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers
+ for 2 host gpio's used for dvs. The format of the gpio specifier depends in
+ the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
+ without being very quickly with no slow ramp time.
+- dvsok-gpios: if we use dvs gpio to control buck1/2, this gpio will be pull
+ high, once RK808 completed the adjustment of voltage. If the DVSOK isn't
+ present, we'll just delay based on whatever is specified in the regulator
+ constraints.

Regulators: All the regulators of RK808 to be instantiated shall be
listed in a child node named 'regulators'. Each regulator is represented
@@ -55,7 +63,10 @@ Example:
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
+ pinctrl-0 = <&pmic_int &dvs_ok &dvs_1 &dvs_2>;
+ dvsok-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
+ <&gpio7 15 GPIO_ACTIVE_HIGH>;
reg = <0x1b>;
rockchip,system-power-controller;
wakeup-source;
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/