Re: [PATCH v3] ath3k: Add support of MCI 13d3:3408 bt device

From: Dmitry Tunin
Date: Wed Nov 19 2014 - 04:52:29 EST


Hi Michael,

As I understood it is a combined device with BT and Wi-Fi WB335 ( based on AR9565 )
It has MCI bt chip.
http://wireless.kernel.org/en/users/Drivers/ath9k/btcoex
http://wireless.kernel.org/en/users/Drivers/ath3k

But still ath3k firmware is needed.

I am just confused if it is AR3011 or AR3012 device.
According to iProduct in lsusb it must be AR3011. But in Windows driver inf file it says

%VID_13D3&PID_3408% = QCABTUSB, USB\VID_13D3&PID_3408 ;AZW

VID_13D3&PID_3374 = "Qualcomm Atheros AR3012 Bluetooth 4.0 + HS"
VID_13D3&PID_3375 = "Qualcomm Atheros AR3012 Bluetooth 4.0 + HS"
VID_13D3&PID_3393 = "Qualcomm Atheros AR9462 Bluetooth 4.0 + HS"
VID_13D3&PID_3395 = "Qualcomm Atheros AR9462 Bluetooth 4.0 + HS"
VID_13D3&PID_3397 = "Qualcomm Atheros AR9462 Bluetooth 4.0 + HS"
VID_13D3&PID_3398 = "Qualcomm Atheros AR9462 Bluetooth 4.0 + HS"
VID_13D3&PID_3402 = "Qualcomm Atheros AR3012 Bluetooth 4.0 + HS"
VID_13D3&PID_3408 = "Qualcomm Atheros Bluetooth 4.0 + HS"

AR3011 must be bt 3.0, AR3012 is bt 4.0
Here it is shown as 4.0, but no AR3012. May be it is some new type of chip.

But it works with both version of patches with AR3012 or without.
I do not know how to test if it is really 4.0 or not.

Dmitry.

19.11.2014 12:37, Michel Memeteau - EKIMIA wrote:
Hi,

I tried to understand why this "0x13d3, 0x3408" device support wouldn't go
in btusb as it's really close to IMC BT chip found in Realtek Wifi devices
which is on the path to go in btusb [1]

then I guess there is a lot of code that could be shared to support all IMC
usb devices in the btusb module.

Regards.

[1] https://github.com/lwfinger/rtl8723au_bt/tree/new

<------------------------------------------------------------------------------------------------------------------>
Michel Memeteau - Directeur.
<http://shop.ekimia.fr/>

Notre Boutique Ordinateurs GNU/Linux : http://shop.ekimia.fr
49 chemin de l'union 13720 La Bouilladisse - France.
Fixe : +33 (0) 972308334 Mobile : +33(0) 624808051
<------------------------------------------------------------------------------------------------------------------>

2014-11-19 7:46 GMT+01:00 Dmitry Tunin <hanipouspilot@xxxxxxxxx>:

Hi Marcel,

Here is information from /sys/kernel/debug/usb/devices

T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms


I hope this mail client is OK now.

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
It is AR3011 device according to iProduct == 0.
So btusb should be blacklisted
I submitted a wrong patch before asif it was an AR3012 device,
but it works both ways. This is the right one.

Signed-off-by: Dmitry Tunin<hanipouspilot@xxxxxxxxx>

---

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index d85ced2..3b53116 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -69,6 +69,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0CF3, 0x3002) },
{ USB_DEVICE(0x0CF3, 0xE019) },
{ USB_DEVICE(0x13d3, 0x3304) },
+ { USB_DEVICE(0x13d3, 0x3408) },

/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03F0, 0x311D) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..bbf5c1c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -146,6 +146,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_IGNORE },

/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },


19.11.2014 01:56, Marcel Holtmann wrote:

Hi Dmitry,

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
It is AR3011 device according to iProduct == 0.
So btusb should be blacklisted
I submitted a wrong patch before asif it was an AR3012 device,
but it works both ways. This is the right one.

include the device details from /sys/kernel/debug/usb/devices.

Signed-off-by: Dmitry Tunin <hanipouspilot@xxxxxxxxx>
are */

No idea what this are */ is.

---
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index d85ced2..3b53116 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -69,6 +69,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0CF3, 0x3002) },
{ USB_DEVICE(0x0CF3, 0xE019) },
{ USB_DEVICE(0x13d3, 0x3304) },
+ { USB_DEVICE(0x13d3, 0x3408) },

/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03F0, 0x311D) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..bbf5c1c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -146,6 +146,7 @@ static const struct usb_device_id blacklist_table[]
= {
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_IGNORE },

Fix whitespace here or use a proper mail client.

Regards

Marcel


--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth"
in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/