[PATCH v3 03/11] ARM: STi: DT: STiH416: Add DT nodes for the ehci and ohci usb controllers.

From: Peter Griffin
Date: Mon Nov 17 2014 - 11:50:54 EST


This patch adds the DT nodes for the 4 usb ehci and ohci usb controllers
on the stih416 SoC.

Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
---
arch/arm/boot/dts/stih416.dtsi | 121 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 121 insertions(+)

diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index ff2ad35..2bdda52 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -324,5 +324,126 @@
clocks = <&clk_sysin>;
clock-names = "osc_phy";
};
+
+ ehci0: usb@fe1ffe00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0xfe1ffe00 0x100>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB0_POWERDOWN>,
+ <&softreset STIH416_USB0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ohci0: usb@fe1ffc00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0xfe1ffc00 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ status = "okay";
+ resets = <&powerdown STIH416_USB0_POWERDOWN>,
+ <&softreset STIH416_USB0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ehci1: usb@fe203e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0xfe203e00 0x100>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB1_POWERDOWN>,
+ <&softreset STIH416_USB1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ohci1: usb@fe203c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0xfe203c00 0x100>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB1_POWERDOWN>,
+ <&softreset STIH416_USB1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ehci2: usb@fe303e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0xfe303e00 0x100>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB2_POWERDOWN>,
+ <&softreset STIH416_USB2_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ohci2: usb@fe303c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0xfe303c00 0x100>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB2_POWERDOWN>,
+ <&softreset STIH416_USB2_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ehci3: usb@fe343e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0xfe343e00 0x100>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB3_POWERDOWN>,
+ <&softreset STIH416_USB3_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ohci3: usb@fe343c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0xfe343c00 0x100>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB3_POWERDOWN>,
+ <&softreset STIH416_USB3_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
};
};
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/