[PATCH v8 00/14] perf: Add infrastructure and support for Intel PT

From: Alexander Shishkin
Date: Fri Nov 14 2014 - 08:44:13 EST


Hi Peter and all,

Since there weren't too many review comments on the two previous
versions, here's another one with a couple more fixes.

[full description below the changelog]

Changes since v7:
* fixed a bug in aux allocation logic that caused more than
requested pages to be allocated,
* fixed pt_event_add() for snapshot mode, which would return an
error in case of successful completion.

Changes since v6:
* replaced kref with atomic in aux refcounting this time for real,
* added a small comment on capabilities/"caps" attribute group in PT
pmu.

Changes since v5:

* dropped "bypass mask", bits that a privileged user could set in
RTIT_CTL,
* merged configuring and enabling RTIT_CTL writes,
* fixed kernel-doc comments
* if LBR/BTS events are present in the system, PT event creation is
disallowed and vice versa,
* fixed a bug with high order allocation under pressure,
* fixed undoing vm_locked accounting in case of AUX allocation
failure,
* left out kernel counters for a separate series to keep this one
concise.

This patchset adds support for Intel Processor Trace (PT) extension [1] of
Intel Architecture that allows the capture of information about software
execution flow, to the perf kernel infrastructure.

The single most notable thing is that while PT outputs trace data in a
compressed binary format, it will still generate hundreds of megabytes
of trace data per second per core. Decoding this binary stream takes
2-3 orders of magnitude the cpu time that it takes to generate
it. These considerations make it impossible to carry out decoding in
kernel space. Therefore, the trace data is exported to userspace as a
zero-copy mapping that userspace can collect and store for later
decoding. To address this, this patchset extends perf ring buffer with
an "AUX space", which is allocated for hardware blocks such as PT to
export their trace data with minimal overhead. This space can be
configured via buffer's user page and mmapped from the same file
descriptor with a given offset. Data can then be collected from it
by reading the aux_head (write) pointer from the user page and updating
aux_tail (read) pointer similarly to data_{head,tail} of the
traditional perf buffer. There is an api between perf core and pmu
drivers that wish to make use of this AUX space to export their data.

For tracing blocks that don't support hardware scatter-gather tables,
we provide high-order physically contiguous allocations to minimize
the overhead needed for software double buffering and PMI pressure.

This way we get a normal perf data stream that provides sideband
information that is required to decode the trace data, such as MMAPs,
COMMs etc, plus the actual trace in its own logical space.

If the trace buffer is mapped writable, the driver will stop tracing
when it fills up (aux_head approaches aux_tail), till data is read,
aux_tail pointer is moved forward and an ioctl() is issued to
re-enable tracing. If the trace buffer is mapped read only, the
tracing will continue, overwriting older data, so that the buffer
always contains the most recent data. Tracing can be stopped with an
ioctl() and restarted once the data is collected.

This patchset consists of necessary changes to the perf kernel
infrastructure, and PT and BTS pmu drivers. The tooling support is not
included in this series, however, it can be found in my github tree [2].

[1] chapter 36 of
http://www.intel.com/content/dam/www/public/us/en/documents/manuals/64-ia-32-architectures-software-developer-manual-325462.pdf
[2] http://github.com/virtuoso/linux-perf/tree/intel_pt

Alexander Shishkin (13):
perf: Add data_{offset,size} to user_page
perf: Support high-order allocations for AUX space
perf: Add a capability for AUX_NO_SG pmus to do software double
buffering
perf: Add a pmu capability for "exclusive" events
perf: Add AUX record
perf: Add api for pmus to write to AUX area
perf: Support overwrite mode for AUX area
perf: Add wakeup watermark control to AUX area
x86: Add Intel Processor Trace (INTEL_PT) cpu feature detection
x86: perf: Intel PT and LBR/BTS are mutually exclusive
x86: perf: intel_pt: Intel PT PMU driver
x86: perf: intel_bts: Add BTS PMU driver
perf: add ITRACE_START record to indicate that tracing has started

Peter Zijlstra (1):
perf: Add AUX area to ring buffer for raw data streams

arch/x86/include/asm/cpufeature.h | 1 +
arch/x86/include/uapi/asm/msr-index.h | 18 +
arch/x86/kernel/cpu/Makefile | 1 +
arch/x86/kernel/cpu/intel_pt.h | 131 ++++
arch/x86/kernel/cpu/perf_event.c | 43 ++
arch/x86/kernel/cpu/perf_event.h | 49 ++
arch/x86/kernel/cpu/perf_event_intel.c | 40 +-
arch/x86/kernel/cpu/perf_event_intel_bts.c | 525 ++++++++++++++
arch/x86/kernel/cpu/perf_event_intel_ds.c | 3 +-
arch/x86/kernel/cpu/perf_event_intel_pt.c | 1082 ++++++++++++++++++++++++++++
arch/x86/kernel/cpu/scattered.c | 1 +
include/linux/perf_event.h | 47 +-
include/uapi/linux/perf_event.h | 59 +-
kernel/events/core.c | 268 ++++++-
kernel/events/internal.h | 33 +
kernel/events/ring_buffer.c | 327 ++++++++-
16 files changed, 2577 insertions(+), 51 deletions(-)
create mode 100644 arch/x86/kernel/cpu/intel_pt.h
create mode 100644 arch/x86/kernel/cpu/perf_event_intel_bts.c
create mode 100644 arch/x86/kernel/cpu/perf_event_intel_pt.c

--
2.1.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/