Re: [PATCH 1/4] input: touchscreen: ti_am335x_tsc Interchange touchscreen and ADC steps

From: Vignesh R
Date: Fri Nov 07 2014 - 00:49:45 EST




On Saturday 01 November 2014 02:33 AM, Hartmut Knaack wrote:
> Vignesh R schrieb am 27.10.2014 12:08:
>> From: Brad Griffis <bgriffis@xxxxxx>
>>
>> This patch makes the initial changes required to workaround TSC-false
>> pen-up interrupts. It is required to implement these changes in order to
>> remove udelay in the TSC interrupt handler and false pen-up events.
>> The charge step is to be executed immediately after sampling X+. Hence
>> TSC is made to use higher numbered steps (steps 5 to 16 for 5 co-ordinate
>> readouts, 4 wire TSC configuration) and ADC to use lower ones. Further
>> X co-ordinate readouts must be the last to be sampled, thus co-ordinates
>> are sampled in the order Y-Z-X.
>>
>> Signed-off-by: Brad Griffis <bgriffis@xxxxxx>
>> [vigneshr@xxxxxx: Ported the patch from v3.12 to v3.18rc2]
>> Signed-off-by: Vignesh R <vigneshr@xxxxxx>
>> ---
>> drivers/iio/adc/ti_am335x_adc.c | 2 +-
>> drivers/input/touchscreen/ti_am335x_tsc.c | 42 ++++++++++++++++++-------------
>> 2 files changed, 25 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
>> index b730864731e8..3f530ed6bd80 100644
>> --- a/drivers/iio/adc/ti_am335x_adc.c
>> +++ b/drivers/iio/adc/ti_am335x_adc.c
>> @@ -98,7 +98,7 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
>> * needs to be given to ADC to digitalize data.
>> */
>>
>> - steps = TOTAL_STEPS - adc_dev->channels;
>> + steps = 0;
> You could even initialize it with zero during variable definition. And I think the above comment could need an update now.

Ok, Will update the comment and initialization

>> if (iio_buffer_enabled(indio_dev))
>> stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1
>> | STEPCONFIG_MODE_SWCNT;
>> diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
>> index 2ce649520fe0..1aeac9675fe7 100644
>> --- a/drivers/input/touchscreen/ti_am335x_tsc.c
>> +++ b/drivers/input/touchscreen/ti_am335x_tsc.c
>> @@ -121,7 +121,7 @@ static void titsc_step_config(struct titsc *ts_dev)
>> {
>> unsigned int config;
>> int i;
>> - int end_step;
>> + int end_step, first_step, tsc_steps;
>> u32 stepenable;
>>
>> config = STEPCONFIG_MODE_HWSYNC |
>> @@ -140,9 +140,11 @@ static void titsc_step_config(struct titsc *ts_dev)
>> break;
>> }
>>
>> - /* 1 â coordinate_readouts is for X */
>> - end_step = ts_dev->coordinate_readouts;
>> - for (i = 0; i < end_step; i++) {
>> + tsc_steps = ts_dev->coordinate_readouts * 2 + 2;
>> + first_step = TOTAL_STEPS - tsc_steps;
>> + /* Steps 16 to 16-coordinate_readouts is for X */
>> + end_step = first_step + tsc_steps;
>> + for (i = end_step - ts_dev->coordinate_readouts; i < end_step; i++) {
>> titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
>> titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
>> }
>> @@ -164,9 +166,9 @@ static void titsc_step_config(struct titsc *ts_dev)
>> break;
>> }
>>
>> - /* coordinate_readouts â coordinate_readouts * 2 is for Y */
>> - end_step = ts_dev->coordinate_readouts * 2;
>> - for (i = ts_dev->coordinate_readouts; i < end_step; i++) {
>> + /* 1 ... coordinate_readouts is for Y */
>> + end_step = first_step + ts_dev->coordinate_readouts;
>> + for (i = first_step; i < end_step; i++) {
>> titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
>> titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
>> }
>> @@ -179,7 +181,7 @@ static void titsc_step_config(struct titsc *ts_dev)
>> titsc_writel(ts_dev, REG_CHARGECONFIG, config);
>> titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY);
>>
>> - /* coordinate_readouts * 2 â coordinate_readouts * 2 + 2 is for Z */
>> + /* coordinate_readouts + 1 ... coordinate_readouts + 2 is for Z */
>> config = STEPCONFIG_MODE_HWSYNC |
>> STEPCONFIG_AVG_16 | ts_dev->bit_yp |
>> ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |
>> @@ -194,8 +196,11 @@ static void titsc_step_config(struct titsc *ts_dev)
>> titsc_writel(ts_dev, REG_STEPDELAY(end_step),
>> STEPCONFIG_OPENDLY);
>>
>> - /* The steps1 â end and bit 0 for TS_Charge */
>> - stepenable = (1 << (end_step + 2)) - 1;
>> + /* The steps end ... end - readouts * 2 + 2 and bit 0 for TS_Charge */
>> + stepenable = 1;
>> + for (i = 0; i < tsc_steps; i++)
>> + stepenable |= 1 << (first_step + i + 1);
>> +
>> ts_dev->step_mask = stepenable;
>> am335x_tsc_se_set_cache(ts_dev->mfd_tscadc, ts_dev->step_mask);
>> }
>> @@ -209,6 +214,7 @@ static void titsc_read_coordinates(struct titsc *ts_dev,
>> unsigned int read, diff;
>> unsigned int i, channel;
>> unsigned int creads = ts_dev->coordinate_readouts;
>> + unsigned int first_step = TOTAL_STEPS - (creads * 2 + 2);
>>
>> *z1 = *z2 = 0;
>> if (fifocount % (creads * 2 + 2))
>> @@ -226,7 +232,7 @@ static void titsc_read_coordinates(struct titsc *ts_dev,
>>
>> channel = (read & 0xf0000) >> 16;
>> read &= 0xfff;
>> - if (channel < creads) {
>> + if (channel > first_step + creads + 2) {
>> diff = abs(read - prev_val_x);
>> if (diff < prev_diff_x) {
>> prev_diff_x = diff;
>> @@ -234,19 +240,19 @@ static void titsc_read_coordinates(struct titsc *ts_dev,
>> }
>> prev_val_x = read;
>>
>> - } else if (channel < creads * 2) {
>> + } else if (channel == first_step + creads + 1) {
>> + *z1 = read;
>> +
>> + } else if (channel == first_step + creads + 2) {
>> + *z2 = read;
>> +
>> + } else if (channel > first_step) {
>> diff = abs(read - prev_val_y);
>> if (diff < prev_diff_y) {
>> prev_diff_y = diff;
>> *y = read;
>> }
>> prev_val_y = read;
>> -
>> - } else if (channel < creads * 2 + 1) {
>> - *z1 = read;
>> -
>> - } else if (channel < creads * 2 + 2) {
>> - *z2 = read;
>> }
>> }
>> }
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/