Re: [PATCH 0/4] Touchscreen performance related fixes

From: Sebastian Andrzej Siewior
Date: Tue Nov 04 2014 - 07:37:44 EST


On 11/04/2014 12:44 PM, Vignesh R wrote:

> I ran following commands
> $ evtest /dev/input/touchscreen0 &
> (with heavy item on touchscreen)
> and
> $ cat /sys/bus/iio/devices/iio\:device0/scan_elements/in_voltage4_en
> (in a busy loop)
> I tried above experiment on my board but I didn't hit any problem even
> after running for close to 30 minutes. I was unable to reproduce failure

Just to make sure: You had the touchscreen and iio command running in
parallel and you saw evtest output while there was iio operation?

> The problem may be in configuring correct charge-delay value. Please run:
> $ ts_test > /dev/null
> and let me know if pen events are being detected properly.

Well I get the touch events but not while busy loop on iio interface is
running (I get maybe one event every 5 seconds or so).
After all, it is the same HW you have.

Sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/