[Patch Part2 v4 19/31] PCI/MSI: Simplify PCI MSI code by initializing msi_desc.nvec_used earlier

From: Jiang Liu
Date: Tue Nov 04 2014 - 07:05:12 EST


Simplify PCI MSI code by initializing msi_desc.nvec_used and
msi_desc.msi_attrib.mutiple when create MSI descriptors.

Also remove redundant checks in IRQ remapping drivers, PCI MSI core
already guarattees these.

Signed-off-by: Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>
---
drivers/iommu/irq_remapping.c | 8 --------
drivers/pci/msi.c | 40 +++++++++++++++-------------------------
2 files changed, 15 insertions(+), 33 deletions(-)

diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 176ff4372b7d..32fe5b1322d0 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -69,19 +69,13 @@ static int do_setup_msi_irqs(struct pci_dev *dev, int nvec)
unsigned int irq;
struct msi_desc *msidesc;

- WARN_ON(!list_is_singular(&dev->msi_list));
msidesc = list_entry(dev->msi_list.next, struct msi_desc, list);
- WARN_ON(msidesc->irq);
- WARN_ON(msidesc->msi_attrib.multiple);
- WARN_ON(msidesc->nvec_used);

irq = irq_alloc_hwirqs(nvec, dev_to_node(&dev->dev));
if (irq == 0)
return -ENOSPC;

nvec_pow2 = __roundup_pow_of_two(nvec);
- msidesc->nvec_used = nvec;
- msidesc->msi_attrib.multiple = ilog2(nvec_pow2);
for (sub_handle = 0; sub_handle < nvec; sub_handle++) {
if (!sub_handle) {
index = msi_alloc_remapped_irq(dev, irq, nvec_pow2);
@@ -109,8 +103,6 @@ error:
* IRQs from tearing down again in default_teardown_msi_irqs()
*/
msidesc->irq = 0;
- msidesc->nvec_used = 0;
- msidesc->msi_attrib.multiple = 0;

return ret;
}
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index fb2ccb536324..afe974600c7d 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -85,19 +85,13 @@ int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
*/
void default_teardown_msi_irqs(struct pci_dev *dev)
{
+ int i;
struct msi_desc *entry;

- list_for_each_entry(entry, &dev->msi_list, list) {
- int i, nvec;
- if (entry->irq == 0)
- continue;
- if (entry->nvec_used)
- nvec = entry->nvec_used;
- else
- nvec = 1 << entry->msi_attrib.multiple;
- for (i = 0; i < nvec; i++)
- arch_teardown_msi_irq(entry->irq + i);
- }
+ list_for_each_entry(entry, &dev->msi_list, list)
+ if (entry->irq)
+ for (i = 0; i < entry->nvec_used; i++)
+ arch_teardown_msi_irq(entry->irq + i);
}

void __weak arch_teardown_msi_irqs(struct pci_dev *dev)
@@ -353,19 +347,12 @@ static void free_msi_irqs(struct pci_dev *dev)
struct msi_desc *entry, *tmp;
struct attribute **msi_attrs;
struct device_attribute *dev_attr;
- int count = 0;
+ int i, count = 0;

- list_for_each_entry(entry, &dev->msi_list, list) {
- int i, nvec;
- if (!entry->irq)
- continue;
- if (entry->nvec_used)
- nvec = entry->nvec_used;
- else
- nvec = 1 << entry->msi_attrib.multiple;
- for (i = 0; i < nvec; i++)
- BUG_ON(irq_has_action(entry->irq + i));
- }
+ list_for_each_entry(entry, &dev->msi_list, list)
+ if (entry->irq)
+ for (i = 0; i < entry->nvec_used; i++)
+ BUG_ON(irq_has_action(entry->irq + i));

arch_teardown_msi_irqs(dev);

@@ -556,7 +543,7 @@ error_attrs:
return ret;
}

-static struct msi_desc *msi_setup_entry(struct pci_dev *dev)
+static struct msi_desc *msi_setup_entry(struct pci_dev *dev, int nvec)
{
u16 control;
struct msi_desc *entry;
@@ -574,6 +561,8 @@ static struct msi_desc *msi_setup_entry(struct pci_dev *dev)
entry->msi_attrib.maskbit = !!(control & PCI_MSI_FLAGS_MASKBIT);
entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */
entry->msi_attrib.multi_cap = (control & PCI_MSI_FLAGS_QMASK) >> 1;
+ entry->msi_attrib.multiple = ilog2(__roundup_pow_of_two(nvec));
+ entry->nvec_used = nvec;

if (control & PCI_MSI_FLAGS_64BIT)
entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64;
@@ -606,7 +595,7 @@ static int msi_capability_init(struct pci_dev *dev, int nvec)

msi_set_enable(dev, 0); /* Disable MSI during set up */

- entry = msi_setup_entry(dev);
+ entry = msi_setup_entry(dev, nvec);
if (!entry)
return -ENOMEM;

@@ -677,6 +666,7 @@ static int msix_setup_entries(struct pci_dev *dev, void __iomem *base,
entry->msi_attrib.entry_nr = entries[i].entry;
entry->msi_attrib.default_irq = dev->irq;
entry->mask_base = base;
+ entry->nvec_used = 1;

list_add_tail(&entry->list, &dev->msi_list);
}
--
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/